Pseudocapacitive Sodium Storage by Ferroelectric Sn2P2S6 with Layered Nanostructure

Sodium ion batteries (SIB) are considered promising alternative candidates for lithium ion batteries (LIB) because of the wide availability and low cost of sodium, therefore the development of alternative sodium storage materials with comparable performance to LIB is urgently desired. The sodium ions with larger sizes resist intercalation or alloying because of slow reaction kinetics. Most pseudocapacitive sodium storage materials are based on subtle nanomaterial engineering, which is difficult for large‐scale production. Here, ferroelectric Sn₂P₂S₆ with layered nanostructure is developed as sodium ion storage material. The ferroelectricity‐enhanced pseudocapacitance of sodium ion in the interlayer spacing makes the electrochemical reaction easier and faster, endowing the Sn₂P₂S₆ electrode with excellent rate capability and cycle stability. Furthermore, the facile solid state reaction synthesis and common electrode fabrication make the Sn₂P₂S₆ that becomes a promising anode material of SIB.     

茶末/CMC-Na/AL-Na复合膜制备及性能测定

目的 为改善传统保鲜膜带来的环境污染问题,开发出具有较好力学性能和抗菌性的食品包装材料提供理论依据。方法 采用海藻酸钠(AL-Na)和羧甲基纤维素钠(CMC-Na)为主要成膜材料,辅助添加茶末通过流延成膜法制备复合膜,以拉伸强度、断裂伸长率等为依据,通过单因素和响应面试验确定茶末/CMC-Na/AL-Na复合膜的最佳工艺。结果 当CMC-Na与AL-Na的体积比为84∶16、茶末添加量为1.43%、干燥温度为50 ℃、干燥时间为7 h时,复合膜综合性能最优,拉伸强度为16.60 N/mm²,断裂伸长率为19.11%,具有较好的力学性能、耐水性、抗氧化性和抑菌性。结论 制备的茶末/ CMC-Na/AL-Na复合膜具有较好的力学性能和抗氧抑菌性能。     

Ascorbic acid imprinted polymer-modified graphite electrode: A diagnostic sensor for hypovitaminosis C at ultra trace ascorbic acid level

A new kind of molecularly imprinted polymer-modified graphite electrode was fabricated by “grafting-to” approach, incorporating sol–gel technique, for the detection of acute deficiency in serum ascorbic acid level (SAAL), manifesting hypovitaminosis C. The modified electrode exhibited ascorbic acid (AA) oxidation at less positive potential (0.0 V) than the earlier reported methods, resulting in a limit of detection as low as 6.13 ng mL⁻¹ (RSD = 1.2%, S/N = 3). The diffusion coefficient (1.096 × 10⁻⁵ cm² s⁻¹), rate constant (7.308 s⁻¹), and Gibb's free energy change (−12.59 kJ mol⁻¹) due to analyte adsorption, were also calculated to explore the kinetics of AA oxidation. The proposed sensor was found to enhance sensitivity substantially so as to detect ultra trace level of AA in the presence of other biologically important compounds (dopamine, uric acid, etc.), without any cross interference and matrix complications from biological fluids and pharmaceutical samples.     

基于荧光多元猝灭响应原理膜传感器测定正己烷中的噻吩

用溶胶 凝胶法制备光纤化学传感器测定正己烷中噻吩的浓度 ,在 1 0 .6～ 2 6 5μg/mL浓度范围内与lg(F0 /F) )成线性 ,相关系数为 0 .9984。检出限为 1 0 .6 μg/mL ,该方法的平均回收率为 1 0 5.0± 7.7%。     

Preparation, characterisation and applications of thin films for gas sensors prepared by cheap chemical method

The physical properties of pure and doped (Ni, Os, Pd and Pt) SnO₂ thin films, prepared by using a chloride-based inorganic sol–gel route, have been reported. These properties were investigated by using differential scanning calorimetry and thermogravimetric (DSC/TG), FTIR, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and atomic force microscopy (AFM) techniques. Microsensors for gas detection were also fabricated and tested in various atmospheres (nitrogen oxide, carbon monoxide, ethanol, methanol and methane). The dopants affected the coating properties depending on the formation of nanoparticles. Furthermore the gas-sensing properties towards reducing and oxidising gases were found to be dependent on the nature of doping element. An array consisting of the manufactured sensors has been arranged and examples of applications for “electronic nose” are given.     

不同品系北京鸭血清前白蛋白多态性的研究

应用聚丙烯酰胺凝胶电泳法研究了北京鸭的血清前白蛋多态性,在2个位点观察到多态,Pam位点为单态,在Pas位点发现有5种表现型,它们的频率是：Pas2-2O 26．67％,Pas1-2为12％,Pas2-1为45.33%,Pas1-1为2．67％,Pas2-0为13．33％,在Paf位点发现有4种表现型,它们的频率是：PafF为29．33％,PafS为41．33％,PafFS为10．67％,Paf0为18．67％,并计算了它们的基因频率,群体平均杂合度和遗传距离,遗传分析表明,樱桃谷鸭和奥白星鸭遗传结构相似,而与B系北京鸭遗传结构有明显差异。     

改良BBS法评价聚氨酯发泡催化剂

改良BBs法用光电法测发泡高度-时间曲线,用机械手完成投掷钢球动作,过程用微机控制。本文对此法测得的三乙胺、四甲基乙二胺、二甲基乙醇胺、双(二甲基氨基乙基)醚、三乙烯二胺等催化剂在聚氨酯软质泡沫塑料形成过程中的胶化-发泡曲线进行了讨论,并评价了它们的催化特性。改良BBs法与手工BBs法相比,具有检测精度高,样本采集点多的优点。     

电解法合成高铁酸钠的实验研究

通过改变传统电极设置位置,评定影响电解效率的各因素以实现电流效率的最大化.在简化电解装置的同时,不影响电流效率的提高.实验结果表明,将传统左右式设置电极改为上下式设置电极,阴极距液面2cm,阳极距底面4cm,电流密度2mA/cm2,NaOH浓度14mol/L,温度60℃,电解1.5h,并加入搅拌的情况下电流效率最大达到58%.