INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed     

利用ADCP回波强度估算河流悬移质含沙量的应用研究

通过简要介绍利用声学多普勒水流剖面仪(ADCP)回波强度估算悬移质含沙量的基本原理,结合梧州水文站的应用实例,利用ADCP的回波强度数据和现场采集的水样含沙量建立相关关系,根据相关关系由回波强度反演估算的水体悬移质含沙量验证了利用ADCP的回波强度估算悬移质含沙量的可行性。应用于梧州水文站的实践表明,左河道推算的系统误差为-0.1%,右河道推算的系统误差为1.5%。这种方法具有不扰动流场、测量剖面同步性较好、数据空间分辨率较高的优点,与传统的取样过滤称量法相比,计算效率显著提高。     

Development of the meshless finite volume particle method with exact and efficient calculation of interparticle area

The Finite Volume Particle Method (FVPM) is a meshless method based on a definition of interparticle area which is closely analogous to cell face area in the classical finite volume method. In previous work, the interparticle area has been computed by numerical integration, which is a source of error and is extremely expensive. We show that if the particle weight or kernel function is defined as a discontinuous top-hat function, the particle interaction vectors may be evaluated exactly and efficiently. The new formulation reduces overall computational time by a factor between 6.4 and 8.2. In numerical experiments on a viscous flow with an analytical solution, the method converges under all conditions. Significantly, in contrast with standard FVPM and SPH, error depends on particle size but not on particle overlap (as long as the computational domain is completely covered by particles). The new method is shown to be superior to standard FVPM for shock tube flow and inviscid steady transonic flow. In benchmarking on a viscous multiphase flow application, FVPM with exact interparticle area is shown to be competitive with a mesh-based volume-of-fluid solver in terms of computational time required to resolve the structure of an interface.     

镀液流速对碳化硅微粒与铜共沉积的影响

本文利用易于控制流速的旋转圆盘电极研究了SiC微粒与Cu的共沉积。得出了在不同镀液流动速度下镀得的复合镀层中微粒含量与镀液中微粒浓度以及与电流密度之间的关系曲线,进而探讨了镀液流速对Cu-SiC共沉积的影响。镀液流速通过影响微粒与阴极之间的弱吸附影响微粒在阴极表面的停留,从而对Cu-SiC复合电沉积过程产生很大影响。     

3-D hydrodynamics generated in a stirred vessel by a multiple-propeller system

The aim of this study is to optimize the position and the number of propellers in a non-standard tall vessel. Laser sheet flow visualization experiments were carried out for selected geometrical arrangements which produced stable flow patterns and good transport between the propellers. Four double-propeller arrangements corresponding to frequent industrial cases and a three-propeller system have been chosen. Comparison of LDA measurements in the r-z plane, dimensionless global parameters N_Qp, Nt_m, N_p, E_p and spatial distribution of local energy dissipation rate ? shows that a three-propeller system is the most efficient.     

Hydrodynamics of disturbed flow and erosion—corrosion. Part I — Single-phase flow study

Numerical simulations of turbulent flow have been used to determine the flow structure in a sudden pipe expansion, in order to explain the effects of disturbed flow on mass transfer controlled erosion–corrosion. Previously determined rates of mass transfer through the liquid boundary layer have been directly related to the predicted levels of near-wall turbulence. When rust films are present, the turbulent fluctuations affect both the mass transfer through the boundary layer and the removal of the film. The determining resistance to mass transfer, under the conditions examined, was that of the rust film.     

尿素生产中尿液的不稳定流动对尿素一分塔的影响

介绍了水溶液全循环法尿素生产系统中,一分塔的精馏段由泡罩塔盘改为规整填料后出现的一系列问题,针对尿液的不稳定流动造成一分塔规整填料严重腐蚀的原因,进行分析并提出整改和预防措施。     

MATHEMATICAL MODELING OF THROUGH-HOLE-PLATING IN ELECTROCHEMICAL MICROFABRICATION II. AXISYMMETRIC TWO-DIMENSIONAL CONVECTIVE MASS TRANSFER

Axisymmetrical, two dimensional mass transfer in a tube and a through-hole was studied. The elliptic convective-diffusion equation was solved numerically by taking into account both the axial and radial diffusion in the entrance region of an infinite tube. The whole mass-transfer region in a tube of finite length was also studied by dividing the domain into several regions according to different mass-transfer mechanisms. A similar analysis is then conducted for a through-hole geometry by assuming a modified Hagen-Poiseuille fluid pattern. Results show that mass-transfer rate in a through-hole is larger than that in a tube by approximately 10%. This is due primarily to faster fluid flow within the concentration boundary layer in a through-hole.     

塑料充模流动粘性模型研究

对多种塑料在不同温度下的剪切速率一稳态剪切粘度数据进行Cross粘性模型参数拟合，得到了表征材料粘度的模型参数(B，Tb，τ^*，n)。其拟合效果良好，能较准确地描述塑料熔体在一定剪切速率和温度范围内的粘流特性，为工程计算和塑料熔体模流分析提供了数据支持。结果表明，该方法有较广泛的适用性。