薄膜干涉型光学全通滤波器的设计与分析

设计并分析了用于多信道色谱补偿的薄膜Gires-Tournois干涉仪（GTI）型光学全通滤波（OAPF），讨论了反射镜的膜层结构对器件 的群延迟谱和反射谱的影响，。以及大角度入射引起的偏分离现象和幅度畸变现象，给出了单级和多级串拉OAPF的初步设计结果。     

Mathematical modeling of falling liquid film evaporation process

A mathematical model of evaporation process from a laminar falling liquid film on a vertical plate of constant temperature is presented. The model is developed with and without interfacial shear stress due to the vapor flow at the liquid film surface. The vapor pressure drop, vapor exit velocity and cooling rate are calculated for different liquid mass flow values. It is shown that lower liquid mass flow produces higher cooling rate. The results also show that the interfacial shear stress has a considerable negative effect on the cooling rate. It is proved that there exists an optimum distance between the plates, which gives the maximum volumetric cooling rate.     

低银医用X光胶片的研制

对几种增黑剂进行了筛选实验研究，选用了两种增黑剂组合使用，提高了遮盖力，使医用Ｘ光胶片涂布银量由原业的９ｇ／ｍ２降到了６．８ｇ／ｍ２，与美国医用Ｘ光胶片涂布银量（６．７ｇ／ｍ２）相当，照相性能不低于国产医用Ｘ光胶片。     

空气中烧成的镍导体及其应用

将空气中烧成的镍导体用于散热制冷片制作工艺中，可降低成本，提高合格率。通过实验得到的最佳值为：镍导体中４号玻璃（ＳｉＯ２＞３０，Ｂ２Ｏ３＞１０，ＰｂＯ＜５５，ＴｉＯ２少许）的含量４．５％，化学镀镍时间５０ｍｉｎ，方阻４７．５ｍΩ／□，附着力８．１Ｎ／ｍｍ２。     

钛酸铅系薄膜的热释电性能及其应用

叙述了钛酸铅系薄膜的热释电原理，介绍了国际上近几年钛酸铅系薄膜材料、制备工艺及热释电性能，并与块状陶瓷材料进行了比较，分析表明钛酸铅系薄膜具有优良的热释电性能及可观的应用前景。     

红外加热胶接技术

提出了红外加热胶接的思想，并对红外加热胶接技术作了简单阐述。介绍了一种红外加热胶接矿用阻燃、防腐、橡塑风筒布的装置。     

Improvement of the optical properties of electrodeposited CuInSe2 thin films by thermal and chemical treatments

Cu, In and Se have been codeposited in thin films by potentiostatic one-step electrodeposition. The as-deposited material has shown direct optical transitions attributable to the CuInSe₂ semiconductor, but also additional absorption corresponding to another semimetallic phase. The secondary phases are selenium and copper selenide compounds which have been determined by composition measurements. In order to eliminate the semimetallic phases and to improve the semiconductor behaviour of the electrodeposited material, thermal and chemical treatments have been performed. After heat-treatment of the samples at 400°C in flowing argon, elemental selenium loss has been detected together with an enhancement of the allowed direct optical transition. The subsequent chemical etching of the layers in a KCN solution has showed to be successful in eliminating the copper selenide phases which were responsible of the remaining sub-bandgap absorption.     

The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

Organic Electroluminescent Thin Film Using 8—hydroxyquinoline Zinc as Emitting Layer

Organic electroluminescent thin film using Znq2(Znq2) as the emitting layer material with structure of glass/ITO/Znq2/Al(cell) was fabricated.The V-I curve ,V-B curve and electroluminescent spectra of the cell were measured.Meanwhile the fluorescent spectra, excited spectra and absorption spectra of Znq2 with power and film states were also measured.