A genetic‐based neuro‐fuzzy controller for blind equalization of time‐varying channels

This paper presents a neuro‐fuzzy network (NFN) where all its parameters can be tuned simultaneously using genetic algorithms (GAs). The approach combines the merits of fuzzy logic theory, neural networks and GAs. The proposed NFN does not require a priori knowledge about the system and eliminates the need for complicated design steps such as manual tuning of input–output membership functions, and selection of fuzzy rule base. Although, only conventional GAs have been used, convergence results are very encouraging. A well‐known numerical example derived from literature is used to evaluate and compare the performance of the network with other equalizing approaches. Simulation results show that the proposed neuro‐fuzzy controller, all parameters of which have been tuned simultaneously using GAs, offers advantages over existing equalizers and has improved performance. From the perspective of application and implementation, this paper is very interesting as it provides a new method for performing blind equalization. The main contribution of this paper is the use of learning algorithms to train a feed‐forward neural network for M‐ary QAM and PSK signals. This paper also provides a platform for researchers of the area for further development. Copyright © 2008 John Wiley & Sons, Ltd.     

多部件设备维修问题研究及遗传算法求解

合理组织设备维修，缩短设备维修时间是生产运营管理的一个重要环节。本文探讨了多部件设备维修的有效组织问题。考虑到维修工人对拆分后设备的不同部分具有不同的维修效率，提出了一种基于维修时间优化的决策方法，将其与经典指派方法进行了比较；进一步地，对这一NP-hard问题设计了遗传算法，通过数值例子讨论了其求解有效性。     

Convergence of iterated boolean sums of simultaneous approximants

Explicit error estimates are given for the iterated Boolean sum of a sequence of simultaneous approximants; the rate of convergence is shown to be improved for smooth functions. The general results are applied in the case of the Bernstein, Durrmeyer and Stancu operators.     

对溢洪闸门自动监控系统中几个问题的探讨

结合某水电站介绍了溢洪闸门自动监控系统的结构、功能，讨论了该研制过程中的几个问题的解决办法．     

利用双种群遗传算法进行数值试井自动拟合

遗传算法以随机化技术为指导，通过对整个解空间的高效搜索而得到全局最优解，当解空间较大时，常规遗传算法难以同时保证搜索速度和最优解的精度。针对这种缺陷提出了应用双种群遗传算法，即利用具有不同搜索策略的2个种群进行联合搜索，既保证了最优解的精度，又提高了搜索速度，将其应用于数值试井自动拟合解释，比常规遗传算法能节省50％以上的计算时间。     

Generation of adaptive gait patterns for quadruped robot with CPG network including motor dynamic model

This paper describes the generation of adaptive gait patterns using new Central Pattern Generators (CPGs) including motor dynamic models for a quadruped robot under various environments. The CPGs act as the flexible oscillators of the joints and adjust joint angles to required values. The CPGs are interconnected with each other and sets of their coupling parameters are adjusted by a genetic algorithm so that the quadruped robot can realize stable and adequate gait patterns. Generation of gait patterns results in the formation of the CPG networks suitable for the formation of not only a straight walking pattern but also of rotating gait patterns. Experimental results demonstrate that the proposed CPG networks are effective for the automatic adjustment of the adaptive gait patterns for the tested quadruped robot under various environments. Furthermore, the target tracking control based on image processing is achieved by combining the general gait patterns. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(1): 35–43, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20225     

基于遗传算法的图像边缘信息链表匹配技术

提出了一种基于遗传算法的图像边缘信息链表匹配方法。首先,采用CANNY算子的方法提取图像边缘;然后,将图像边缘信息链表化;最后,基于链表化结果利用遗传算法进行链表匹配。该方法能够减少匹配过程中的计算量,且能实现高效匹配。通过仿真实验,验证了该方法的性能。     

基于混合遗传算法的树状注水管网拓扑优化

以投资最小为目标函数,以井间隶属关系的惟一性、连接注水井数量等限制为约束条件,建立了树状注水管网拓扑优化数学模型.根据模型特点,将优化问题分为分配层和几何层,分别采用遗传算法和非线性优化方法进行求解.并对遗传算法的操作过程进行了改进,调整了适应函数,采用随机多父辈适应函数值加权交叉和多种变异操作,结合了模拟退火算法,并给出了初温的确定方法,改进了选择复制操作,从而形成了混合遗传算法.该算法能够有效地提高收敛速度,避免早熟收敛.利用算例说明了该方法的有效性.     

Design optimization of 3D steel structures: Genetic algorithms vs. classical techniques

In this paper an elitist genetic algorithm (GA) developed by the authors is compared with common commercial solutions for complex structural optimization. After its prior validation on two-dimensional (2D) structures, the GA was tuned and improved in order to obtain structural elements with minimum weights that satisfy the ultimate limit states of the applicable building code. Subsequently, the same spatial structures were optimized using a commercial structural analysis program. Finally, the cost and weight improvements obtained using the GA, although at a higher computational cost, are discussed.     

小生境遗传算法AVOA反演

采用具有水平对称轴的横向各向同性(HTI)模型研究裂缝性油气藏,P波振幅随炮检距和方位角变化(AVOA),表现出较强的方位各向异性特征。本文基于Ruger提出的HTI介质模型的P波反射系数公式,利用由基准测线和另外两条与之呈45°、90°测线的P波反射系数的相对差异估算裂缝方位;同时引入小生境遗传算法,对基准测线和与之呈90°测线的P波反射系数差进行反演,得到了较高精度的纵、横波波速比和Thomsen各向异性参数。