减少手术创伤始终是妇科肿瘤手术快速康复的决定性因素

减少手术创伤始终是快速康复的决定性因素,这一点在目前的加速康复外科研究尤其是复杂手术,如妇科肿瘤手术中尚未得到充分重视。尊重学习曲线、全面规划手术方案、总结失利经验、开展前瞻性研究是解决此问题的主要方案。本文着重讨论妇科肿瘤手术创伤对术后加速康复的影响及可能的改进措施。     

Feasibility analysis of membrane reactors – discovery of reactive arheotropes

A feasibility analysis methodology adopted from reactive distillation is applied to membrane reactors. A model is formulated to depict the reactive liquid phase composition on the retentate side of a continuous type membrane reactor. The effects of both the chemical reaction kinetics and the membrane mass transfer kinetics on the feasible products are elucidated by means of retentate phase diagrams and bifurcation analysis. The proposed method can be applied to various membrane processes, independent of the specific structure of the membrane. Two quaternary reaction systems are considered to illustrate the methodology. In the first hypothetical system, it is shown how selective membranes can influence the sequence of effective volatilities which in turn affects the feasible products of the system. In the second example of practical importance, i.e. the heterogeneously catalysed synthesis of propyl acetate coupled with permeation through a porous polycarbonate membrane, the dusty gas model is applied to describe the component fluxes through the membrane. For the latter reaction system, the existence of reactive arheotrope is demonstrated. Arheotropes represent mass transfer controlled feasible products of membrane separation process.     

Kinetic behaviour of muscle LDH immobilized in nylon tubing

Immobilization was carried out of the lactate dehydrogenase (LDH) from rabbit muscle (EC 1.1.1.27), cross-linked through the bifunctional reactive glutar-aldehyde on to nylon tubing (1 m long, 53cm² internal surface area). Immobilized LDH inactivation kinetics are of first order (t_1/2 = 3·6 years, k = 5·4,e^?4 day^?1 to 5°C). The smaller effect of pH on activity than in the case of LDH in solution can be explained on the basis of limitation to proton diffusion towards the support. A limiting effect to free external diffusion of the substrate towards and products from the support was also observed, an effect which seems to determine the effective kinetic behaviour of immobilized LDH. The apparent optimum temperature is centred around 40°C, observing a clear inactivation (thermal denaturation) above this temperature. In the temperature range studied (10–40°C), the co-existence was seen of a kinetic control accompanied by another control, involving diffusional transport of substrates and products, on the global activity of the immobilized enzyme. This makes the Arrhenius profiles curvilinear. Both graphic and statistical non-linear regression analysis of the kinetic data—rate, v, versus substrate concentration [S]—carried out under conditions in which the diffusional limitations can be considered negligible (high recirculation flow rate), permitted investigation of the intrinsic kinetic behaviour of immobilized LDH. In this sense, it can be deduced that the rate equation to which these data seem to be fitted is of the polynomial quotient type in [S] of minimum degree 2:2. Although the diffusional limitations have a marked effect on the type of global kinetics shown by immobilized LDH, temperature was not found to affect its v[S] behaviour. The experimental evidence obtained thus indicates that the rate equation in the 10-40°C temperature range continues to be a rational equation of at least degree 2:2 in [S].     

Quantitative evaluation of generator power control effect of FACTS controllers for power system stabilization

The advancement of power electronics technologies has significantly developed the power system stabilizing controllers. Quantitative as well as qualitative evaluation of their effectiveness in power systems is a matter of great importance for the feasibility investigation of these apparatus. In this paper, the possible control region of FACTS controllers with series and/or shunt configuration in a single machine to infinite bus system is formulated in the powerangle curve with a set of algebraic equations. The effectiveness of TCPST (Thyristor‐Controlled Phase Shifting Transformer), SSSC (Static Synchronous Series Compensator), and TCSC (Thyristor‐Controlled Series Compensator) for the improvement of the transient stability is evaluated quantitatively as a numerical example. The correctness of the proposed method has been confirmed by analysis based on the electromagnetic transients simulation with a detailed system model. © 2001 Scripta Technica, Electr Eng Jpn, 138(3): 43–51, 2002     

Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.     

Geometry-Dependent R-Curve for Quasi-Brittle Materials

Fracture of quasi-brittle materials such as ceramics and cement-based materials can be described by an R -curve, defined as fracture resistance. The R -curve can be constructed as the envelope of the strain energy release rates ( G ). In this study, R -curve is defined as an envelope of G -curves obtained by varying the dimensions of identical specimens, while keeping the geometry and the initial flaw size constant. By approximating the G -curve with a second-order function of the crack length, a simple formulation of the R -curve is derived by solving a differential equation. Three parameters are needed for the proposed R -curve. These parameters can be obtained by testing a notched-beam specimen and using linear elastic fracture mechanics. The proposed R -curve simulates well the geometry dependency as well as other characteristics of the fracture response of quasi-brittle materials.     

粘合剂流变特性的研究(待续)

本文从流变学的观点出发,分析粘合剂在配制及粘结过程中,反映出不同的流变特性,而粘合剂本身的流动、粘度、触变性与涂胶及其粘合的质量关系重大。     

固定床吸附器透过曲线参数优化方法

开发了一种固定床吸附器透过曲线参数估值的优化方法，用Ｂａｓｉｃ语言编制了运算程序，并在普及型２８６微机上考核了该法的可靠性，相对误差在１％以下，运算机时７．５ｍｉｎ。     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

Packed-microtubes model for flowthrough chromatography of protein

A mathematical model for flowthrough (perfusion) chromatography, namely packed-microtubes (PMT) model, has been proposed for a column packed with biporous (BiP) anion exchanger in which the mesopores and flowthrough pores are created with liquid and solid porogens, respectively. The model is established based on the assumption that the BiP particle is made up of packed microtubes. Bovine serum albumin (BSA) is used as a model protein and three kinds of anion exchangers (i.e., mesoporous, macroporous and BiP resins) are used as adsorbents to determine the model parameters and to evaluate the model. Adsorption equilibrium and finite bath experiments are performed to determine the adsorption isotherms and kinetics parameters. Both the bound amounts of the protein on the surface of the mesopores and macropores are experimentally determined and taken into account in the mathematical model. With all the model parameters determined by independent experiments or calculated from available correlations, model simulations are performed and compared with the experimentally determined breakthrough profiles of the BiP column. It is found that the model predictions agree reasonably well with the experimental data obtained under various conditions and the PMT model fit experimental data better than the modified double linear driving force (LLDF) model proposed by Leitão and Rodriogues (1999. Biochemical Engineering Journal 3, 131) in which the adsorbent particle is considered to be made up of packed microparticles. The results indicate that the PMT model is more reasonable for this kind of BiP adsorbent.