舰载火箭武器系统随机响应分析

利用随机振动复模态分析，提出了一种求解时变线性系统，在确定性激励与随机激励共同作用下非平稳随机响应的计算方法，并以舰载火箭武器系统为研究对象，用该法探讨了海浪对舰面火箭发射初始扰动和系统振动特性的影响。     

本钢炼焦煤最佳配比分析

结合本钢的生产实际，对炼焦煤的最佳配比作了比较具体的分析，同时对资源，质量、成本也作了比较详细的调查，并提出了本钢焦化厂最佳配煤比方案，由此可看出，最大限度地降低采购成本，继续开发合理的配煤比例，具有广阔的前景。     

小型水电站联网改造应注意的几个问题

针对铜鼓县小水电站联网时存在的问题及其不利影响进行了分析，井提出了改进途径，指出小水电站的联网改造应立足安全，争取效益。     

实验应变／应力模态分析若干问题的进展评述

本文评述了实验应变／应力模态分析进展的若干基本问题。主要是：应变响应与位移响应的关系；应变频响函数矩阵的特点及其测量方法；应变模态的加权正交性及其识别方法；以及其他问题。     

Analysis of brushless three-phase synchronous generator without exciter

Recently, a demand for small-capacity generators has been increasing as electric sources in small ships and automobiles or as portable electric sources driven by engines. It is desired that the structure of small-capacity generators be simple and robust, and that the generators be highly reliable, easily maintained and controlled. This paper describes an analysis of the original brushless synchronous generator without exciter. The output voltage can be adjusted in the wide range by controlling the stator dc current. To analyze the characteristics of this generator, the finite element method is applied. It is found that the results of theoretical analysis agree well with the experimental results.     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

胜利油区放射性同位素测井的粒径选择

根据胜利油区的地层渗透率、孔隙度，在２７个低渗透油田和４６个中、高渗透油田的放射性同位素测井中进行了粒径为１００～３００μｍ、３００～６００μｍ、６００～９００μｍ放射性同位素１３１Ｂａ微球粒径选择实验，确定了放射性同位素１３１Ｂａ微球的选择原则。当油藏渗透率Ｋ＜１００×１０－３μｍ２、孔隙度＜２０％时，放射性同位素粒径为１００～３００μｍ；当油藏渗透率Ｋ＞１００×１０－３μｍ２、孔隙度＞２０％时，放射性同位素粒径为３００～６００μｍ或６００～９００μｍ。在此基础上得到胜利油区选用同位素粒径明细表，对于指导施工，提高放射性测井资料的可靠性具有重要意义。     

输气管道天然气连续取样器的研制及应用

文章针对国内管输天然气气质分析工作中取样环节所存在的问题，结合国外技术发展趋势，全面地介绍了输气管道天然气连续取样器的研制过程。实践证明，该装置较好地解决了天然气密度值偏差问题，满足管输天然气全分析的要求，同时，该装置的推广应用将会提高天然气的计量准确度。     

微波单片集成电路的成品率优化

采用建立管芯等效电路模型、灵敏度分析以及统计勘探法对微波单片集成电路进行成品率优化，并编制了软件，加入到ＧａＡｓＩＣＣＡＤ系统中。应用该软件对Ｘ波段低噪声ＭＭＩＣ、超宽带ＭＭＩＣ放大器进行了设计，成品率有较大的提高，电路性能有所改善。     

Synthesis and characterization of poly(ethylene aspartate)-metal complexes

Poly(ethylene aspartate) [PEA] was synthesized by the melt condensation of D,L-aspartic acid and ethylene glycol. PEA containing pendent amino and carbonyl groups in its repeating chain was used as the polymeric ligand for complexation with transition metal ions, viz. Co(II), Ni(II), Cu(II), Mn(II), Zn(II), Cd(II), Ca(II), Mg(II), Pb(II) and Hg(II). Complexation was found to be most effective in DMSO. The resulting polyester-metal complexes were solid coloured materials which have been characterized by IR spectroscopy, elemental analysis and magnetic susceptibility measurements. The thermal stability of the polyester-metal complexes was investigated by thermogravimetric analysis (TGA). On the basis of the physico-chemical studies, an oxygen and nitrogen coordinated structure for the polyester-metal complexes is proposed.