低相噪,低杂波数字锁相环路滤波器的设计

较详细地分析数字锁相频率合成器的相位噪声，着重用控制论方法对低相噪、低杂波锁相环的环路滤波器进行设计，并用某Ｓ波段频率合成器的实验结果进行了验证。     

钼还原过程相变化研究

采用钼酸铵直接氢还原及钼酸铵先焙解然后再分段氢还原两种不同的还原方法进行了钼粉还原。通过Ｘ射线衍射方法分析了两种工艺还原过程中的反应序列及相变化规律，并讨论了不稳定相Ｍｏ４Ｏ１１对于钼粉还原过程的影响。     

Analysis and optimisation of the HIPERLAN Channel Access Contention Scheme

This paper analyses the HIPERLAN channel access mechanism. Both a purely mathematical and a simulation model are built in order to evaluate the two successive phases of the contention scheme. Several optimisations, based on the choice of parametric values, are proposed, evaluated and compared.     

A Method of Combined SHPB Technique and BP Neural Network to Study Impact Response of Materials

Abstract:  A new method combining the split Hopkinson pressure bar (SHPB) technique with the back-propagation (BP) neural network program is proposed. By this method, the treated strain wave signals become smooth with less noises induced by the transverse inertia. Moreover, the dynamic rate-dependent constitutive behaviour of materials can be identified, without any pre-assumption of a constitutive model. It is found that by taking the experimentally measured data of strain, strain rate and time as 'input' and the corresponding data of stress as 'output' of the BP neural network, the dynamic constitutive behaviour with internal damage or phase transformation evolution is easy to be identified, where the time could represent either the internal damage evolution or phase transformation process accompanied with the deformation process. It is emphasised that the data learnt by the BP neural network must include both loading and unloading processes, if the whole loading and unloading response is to be correctly predicted. The comparisons between the predictions and experimental results are in good agreement for both polyamide (PA) polymer (as an example of nonlinear viscoelastic materials) and Ti–Ni alloy (as an example of superelastic materials with stress-induced phase transformation).     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006     

高频地波雷达相位补偿系统

OSMAR2000采用的是“一发八收,收发共用”模式的相控阵高频地波雷达.为了扩大其探测的范围,在新的雷达系统中将采用多发多收的模式,从而导致当信号通过通道后,信号的相位会因受到通道的调制而发生改变,使得雷达无法正常工作,因此需要对通道的相位进行实时监控和补偿.在参考了低频段的相位测量原理和射频段的相移电路的设计理论的基础上,该文提出了基于差分放大器、容阻和容感器件的高频地波雷达收发通道的相位控制系统.     

大电流监测信号提取的光收发及信号处理

近年来,大电流的监测成了人们十分关心的问题,这是由于大电流有强磁、高压、电流大等一系列的直接监测所不能克服的问题。这就需要把高压大电流的强电信号,经过提取后变成能在实验室中直接观测的弱电信号。为此,如何从高压大电流的信号中提取出随实时信号变化而实时变化的小信号就变成了一个关键问题。详细介绍了监测信号提取的光收发电路原理和后续信号处理电路,分析了各部分的作用,给出了必要的分析结果。     

Formation of low-resistivity poly-Si and SiNx films by Cat-CVD for ULSI application

In this paper, bulk-Si metal–oxide–semiconductor field effect transistors (MOSFETs) are fabricated using the catalytic chemical vapor deposition (Cat-CVD) method as an alternative technology to the conventional high-temperature thermal chemical vapor deposition. Particularly, formation of low-resistivity phosphorus (P)-doped poly-Si films is attempted by using Cat-CVD-deposited amorphous silicon (a-Si) films and successive rapid thermal annealing (RTA) of them. Even after RTA processes, neither peeling nor bubbling are observed, since hydrogen contents in Cat-CVD a-Si films can be as low as 1.1%. Both the crystallization and low resistivity of 0.004 Ω·cm are realized by RTA at 1000 °C for only 5 s. It is also revealed that Cat-CVD SiN_x films prepared at 250 °C show excellent oxidation resistance, when the thickness of films is larger than approximately 10 nm for wet O₂ oxidation at 1100 °C. It is found that the thickness required to stop oxygen penetration is equivalent to that for thermal CVD SiN_x prepared at 750 °C. Finally, complementary MOSFETs (CMOSs) of single-crystalline Si were fabricated by using Cat-CVD poly-Si for gate electrodes and SiN_x films for masks of local oxidation of silicon (LOCOS). At 3.3 V operation, less than 1.0 pA μm⁻¹ of OFF leakage current and ON/OFF ratio of 10⁷–10⁸ are realized, i.e. the devices can operate similarly to conventional thermal CVD process.     

高功率双工旋转场移相器

旋转场移相器具有移相精度高(均方根误差可小于1°)和温度稳定性好等特点,通过改进射频传输结构,可大大提高他的功率容量。利用旋转场移相器的互易特性和铁氧体圆极化器的非互易特性,设计出高功率双工旋转场移相器。其双工特性可将收/发信号分开,实现移相器和环行器的双重功能,用于天线的收发通道等场合时,可省去一个高功率环行器,结构紧凑。分析了双工旋转场移相器的工作原理,阐述了高功率应用下的设计方法,推导出了管状铁氧体的相移量计算公式,按此方法设计了实用的器件,并给出了试验数据。     

Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.