Li2O在保护渣中的作用

采用在不同玻璃性的两种基渣中加入Ｌｉ２Ｏ为研究Ｌｉ２Ｏ对保护渣粘度，熔化温度及玻璃性能的影响，并对Ｌｉ２Ｏ改善保护渣玻璃性的机理进行了探讨，提出了寻找高速连铸保护渣中Ｌｉ２Ｏ的代用物的一种方法。     

Ti,N,Mg对M2高速钢凝固组织和硬度的影响

为了改善Ｍ２高速钢共晶碳化物的分布，本文利用小凝固试样变质的方法研究了Ｔｉ，Ｎ和Ｍｇ对Ｍ２高速钢凝固组织和硬度的影响。试验结果表明，加入Ｔｉ或Ｔｉ－Ｎ后，共晶碳化物形态和分布有很大改善，而加入Ｔｉ－Ｎ后对凝固组织有轻微的细化作用，但只添加Ｔｉ不补碳时，钢的淬火硬度和回火硬度均下降；加入适量的Ｍｇ可以使片状的Ｍ２Ｃ型共晶碳化物转为鱼骨状的Ｍ６Ｃ型共晶碳化物，使其分布有所改善，Ｔｉ和Ｍｇ复合加入可以明     

煤气压缩机存在问题及改造措施

对煤气压缩机运行以来所存在的问题进行了分析，相继采取的改造措施及取得的效果作了探讨。重点阐述了油冷却器的改造。     

Influence ofAmaranthus hybridus L. allelochemics on oviposition behavior ofSpodoptera exigua andS. eridania (Lepidoptera: Noctuidae)

Common pigweed,Amaranthus hybridus L., is a favorite host of the beet army worm (BAW),Spodoptera exigua L. Chemicals extracted from homogenized pigweed with distilled water, ethanol, or dichloromethane and sprayed back on pigweed deterred oviposition by the BAW. Similarly, water extracts of frass from conspecific larvae or southern armyworm (SAW) larvae,S. eridania (Cramer), fed pigweed leaves and sprayed back on pigweed plants also deterred BAW oviposition, thus confirming that deterrence was due to plant allelochemics rather than specific compounds associated with the metabolic or excretory products of the larvae. Confirmation of the presence of oviposition-deterring chemicals in pigweed was used to explain a previously observed seasonal displacement of BAW by SAW on pigweed in the field.Mention of a commercial or proprietary product does not constitute an endorsement by the USDA.     

p,V, T and derived thermodynamic data for toluene,trichloromethane, dichloromethane,acetonitrile, aniline,and n-dodecane

Experimentally determined p,V,T data are reported for toluene, trichloromethane, dichloromethane, acetonitrile, aniline, and n-dodecane at 278, 288, 298, 313, and 323 K, except for dichloromethane, for which the highest temperature was 298 K. At each temperature, measurements were done at pressures up to about 280 MPa or (for aniline and n-dodecane) at a lower pressure slightly below the freezing pressure at the temperature of measurement. Values of the isobaric expansivity isothermal compressibility and (for toluene, trichloromethane, dichloromethane, and acetonitrile) internal pressure, derived from the p,V,T data, are presented.     

Centrifugal Casting of High Speed Steel/Nodular Cast Iron Compound Roll Collar

Ｈｉｇｈ ｓｐｅｅｄｓｔｅｅｌ (ＨＳＳ) ,ｉｓｃｈａｒａｃｔｅｒｉｚｅｄｂｙｅｘ ｃｅｌｌｅｎｔｈａｒｄｎｅｓｓ ,ｗｅａｒｒｅｓｉｓｔａｎｃｅ ,ａｎｄ ｇｏｏｄｒｅｄｈａｒｄｎｅｓｓ .Ｒｅｃｅｎｔｌｙ ,ＨＳＳｉｓａｐｐｌｉｅｄｔｏｍａｎｕｆａｃｔｕｒｅｈｏｔｒｏｌｌｉｎｇｒｏｌｌｓｔｏｐｒｏｄｕｃｅｓｔｒｉｐｓｏｆｇｏｏｄｓｈａｐｅａｎｄｓｍａｌｌｃｒｏｗｎｗｉｔｈｅｘｔｅｎｄｅｄｒｏｌｌｓｅｒｖｉｃｅｌｉｆｅ[1,2 ] .ＴｈｅＨＳＳｉｓａｐｐｌｉｅｄｔｏｍａｎｕｆａｃｔｕｒｅｒｏｌｌｃｏｌｌａｒｆｏｒ…     

高密度澄清池在邯钢第二污水处理厂的应用

高密度澄清池是一种新型高效的澄清池。介绍了高密度澄清池的工艺原理、运行条件和主要参数及在邯钢第二污水处理厂的应用情况。     

Perceived risk for influenza in veterans with spinal cord injuries and disorders.

Objective: Guided by the extended parallel process model (EPPM), the objective was to assess control processes dominant in influenza behavior decisions. Design: Cross-sectional survey. Results: Response rate was 31% (n=968). Regarding influenza risk, 59% were in danger control. Those in fear control were more likely to report influenza infection (p=.000). In the nonvaccinated, those in fear control were more likely to indicate not knowing where to get the vaccine (p=.016) and that it was unavailable (p=.027), and those in danger control believed they did not need it (p=.023). Zero critical values were more likely to indicate that no health provider recommended the shot (p=.002). Conclusions: Most perceived efficacy to be stronger than threat related to influenza; according to the EPPM, they are aware of their risk but recognize their ability to avert it. For those in danger control, messages should focus on increasing perceptions of severity and susceptibility to positively affect behavior change. For those in fear control, messages should focus on efficacy only. With a critical value of zero, no threat is induced, and a high-threat/high-efficacy approach should be taken. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Automatic playlist generation based on tracking user’s listening habits

Algorithms for automatic playlist generation solve the problem of tedious and time consuming manual selection of musical playlists. These algorithms generate playlists according to the user’s music preferences of the moment. The user describes his preferences either by manually inputting a couple of example songs, or by defining constraints for the choice of music. The approaches to automatic playlist generation up to now were based on examining the metadata attached to the music pieces. Some of them took also the listening history into account. But anyway, a heavy accent has been put on the metadata, while the listening history, if it was used at all, had a minor role. Missings and errors in metadata frequently appear, especially when the music is acquired from the Internet. When the metadata is missing or wrong, the approaches proposed so far cannot work. Besides, entering constraints for the playlist generation can be a difficult activity. In our approach we ignored the metadata and focused on examining the listening habits. We developed two simple algorithms that track the listening habits and form a listener model—a profile of listening habits. The listener model is then used for automatic playlist generation. We developed a simple media player which tracks the listening habits and generates playlists according to the listener model. We tried the solution with a group of users. The experiment was not a successful one, but it threw some new light on the relationship between the listening habits and playlist generation.     

Improvement of levitation characteristics in a magnetic bearing system using HTSC‐permanent magnet hybrid structure

Magnetic bearing using pinning force of a permanent magnet and a high‐temperature superconductor has been developed. Additional permanent magnet is introduced to increase the levitation force of the magnetic bearing. In this hybrid magnetic bearing system, levitation force is mainly given by the repulsive force of the permanent magnets, and stability for the lateral direction is given by pinning force of the superconductor. The experimental device is developed. A ring‐type superconductor and a bulk one are examined. Levitation characteristics of the hybrid magnetic bearing are measured. The bulk superconductor shows better characteristics of both levitation and lateral stability than the ring one. Levitation force of the hybrid system becomes about twice as large as that of the nonhybrid one. Although, the repulsive force of the permanent magnet decreases the lateral stability of the system, its influence becomes small by choosing an adequate position of the permanent magnets and the superconductor. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 71–77, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10350