光催化降解废气过程中紫外辐射照度模拟和优化

为在光催化设计中合理布置紫外灯,减少光在传输过程中的损失,概括总结径向辐射模型、多点源叠加近似辐射模型和离散坐标辐射模型等3种经典的紫外辐射物理模型;基于离散坐标辐射模型模拟某公司生产的光催化氧化废气处理装置的紫外辐射照度;通过调整灯管布置距离改变光强分布,并拟合光催化单元和光催化网表面的平均紫外辐射照度随灯管布置距离变化曲线.结果表明,距离参数在55～65 mm时,该光催化反应装置的光能利用率较好;紫外灯的合理布置可有效提高光能利用率.     

Antimicrobial protection of cotton and cotton/polyester fabrics by radiation and thermal treatments. I. Effect of ZnO formulation on the mechanical and dyeing properties

Cotton and cotton/polyester fabrics were treated against microbial attack by applying a formulation based essentially on ZnO under high‐energy radiation and thermal curing. To achieve the homogeneity and the reactivity of the treating formulation, a binder (Impron MTP) and a dispersing agent (Setamol WS) were used with ZnO. The antimicrobial property of the fabrics was evaluated, in terms of mechanical properties, by a soil burial test. Moreover, the effect of antimicrobial finishing on the dyeing properties in terms of color strength was investigated. It was found that the best composition that affords the best antimicrobial protection to cotton fabrics contains 2% ZnO, 2% binder, and 1% dispersing agents. For the cotton/polyester blend, the best results were achieved at the same conditions except the ZnO was 1%. It was found that the treatment under the effect of electron‐beam irradiation is better than that of gamma irradiation and thermal curing. The results showed that when the finishing process was carried out before dyeing with a reactive dye, it affects the color strength rather than performing the finishing after the dyeing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1129–1137, 2003     

基于复合左右手传输线结构的新型微带天线

基于复合左右手传输线结构的零阶谐振理论,提出了一种新型双层结构的微带天线,仿真结果表明该天线具有比单层微带天线更小的尺寸。研究了天线各结构参数对天线特性的影响,并对各参数进行了优化仿真。仿真结果表明该天线具有全向辐射特性,与传统微带天线相比,该天线具有体积小的特点。     

南京地区固定式安装太阳能电池板最佳倾角设计

对于固定安装的光伏电池板,其倾角的选择直接影响到所接收到的太阳辐射量,从而决定着太阳能利用系统的性能。本文在获得南京地区辐射资料的基础上,采用太阳辐射量气象学模型,针对任意方位角固定式安装的光伏电池板给出了最佳倾角的计算结果。该结果可为南京地区太阳能系统的设计与安装提供理论依据,并为相近地区太阳辐射量计算提供参考。     

Radiation-induced copolymerization of trioxane with tetrahydrofuran

Radiation-initiated copolymerization of solid trioxane (TOX) with tetrahydrofuran (THF) was investigated. The effects of radiation dose, THF concentration, and post-polymerization temperature and duration on copolymer yield and THF incorporation were studied. These results are compared with the results of TOX homopolymerization under identical conditions. Copolymer yield was lower than that of homopolymer. Only a fraction of charged THF entered into the polymer chain. THF content and radiation dose also altered the MW of the copolymer but it showed better thermal stability. The initial reaction rates of the copolymerization were determined and from these the activation energy was found to be 36.2 kcal mol^?1.     

无线通信基站建设中电磁辐射缓解技术应用实践

无线通信基站电磁辐射缓解技术包括增加发射天线架设高度、增加天线增益、降低发射器功率、减小VRP下倾角度和改变垂直辐射图VRP等。结合案例分析了无线通信基站建设过程中电磁辐射缓解技术的应用实践。     

煤矿井下电磁环境评价

分析了煤矿井下输电巷道、牵引网络及电机车巷道、机电硐室内以及通信系统的电磁干扰特点及传播路径,并对某煤矿井下不同区域的电磁干扰进行了测试;通过分析测试数据,参考GB 9175—88《环境电磁波卫生标准》对各区域的电磁环境进行了评价,结果表明所测试环境均达到一级环境电磁场的标准。     

A low‐profile antenna with circularly polarized reconfigurable and omnidirectional radiation patterns

A low profile circularly polarized (CP) antenna with reconfigurable polarization is designed and presented, which can radiate omnidirectional patterns that can be switched between left‐hand circularly polarized (LHCP) and right‐hand circularly polarized (RHCP). A pair of arc‐shaped complementary dipoles is acted as reconfigurable elements by bridging four pin diodes at the dipole arced arms. A meander phase shift line is employed to connected the arc dipole arms and plate cavity to adjust the phase relationship of two sources. The proposed antenna exhibits the omnidirectional radiation pattern by combining six identical elements placed in a circular array configuration. 24 p‐i‐n diodes are exploited to six elements, by manipulating the dc bias voltage across the diodes, the polarization state of the antenna can be switched. The patterns of the antenna are similar to that of a dipole, but its size is only about Φ0.87 × 0.029λ₀ at 5.8 GHz. The overlapped bandwidth of measured 3‐dB axial ratio (AR) and 10‐dB return loss is 5.724‐5.87 and 5.738‐5.91 GHz for two polarization states, which are right on the target of ISM band. It can be well adapted to medical diagnosis systems.