Wave dynamics on a thin-liquid film falling down a heated wall

The dynamics of a thin liquid film falling down a uniformly heated wall is studied. The model introduced by Kalliadasis et al. [J. Fluid Mech. 475 (2003) 377] for the same problem is revisited and its deficiencies, namely the prediction of a critical Reynolds number with 20% error, cured. For the energy equation a high-order Galerkin projection in terms of polynomial test functions is developed. It is shown that not only does this more refined formulation correct the critical Reynolds number, but it also gives, with an appropriate expansion close to criticality, the long-wave theory. Bifurcation diagrams for permanent solitary waves are constructed and compared with the solution branches obtained from different models. It is shown that, in all cases, the long-wave theory exhibits limit points and branch multiplicity, while the other models predict the continuing existence of solitary waves. Time-dependent computations show that the free surface and interfacial temperature approach a train of coherent structures that resemble the infinite-domain stationary solitary pulses.     

Importance of out-of-plane dispersion of the excitation spectrum of superconducting bilayers with Josephson coupling

We study the effect of Josephson coupling between adjacent superconducting layers on the BCS energy spectrum. We find that the interference between the gap functions of two layers can lead to vanishing condensation energy for perpendicular momenta corresponding to the formation of standing waves. We therefore predict a conventional energy spectrum for large interlayer spacings, if the gap of the single layers has no nodes, and in all cases a gapless spectrum for small spacings. Within the experimental error, our numerical results account for the low-temperature dependence of the penetration depth reported in Nd_1.85Ce_0.15CuO₄ and YBa₂Cu₃O_6.9.     

Reactivity of steam in exhaust gas catalysis III. Steam and oxygen/steam conversions of propane on a Pd/Al2O3 catalyst

A 1% Pd catalyst (38% dispersion) was prepared by impregnating a γ-alumina with palladium acetylacetonate dissolved in acetone. The behaviour of this catalyst in oxidation and steam reforming (SR) of propane was investigated. Temperature-programmed reactions of C₃H₈ with O₂ or with O₂ + H₂O were carried out with different stoichiometric ratios S(S =[O₂]/5[C₃H₈]). The conversion profiles of C₃H₈ for the reaction carried out in substoichiometry of O₂ (S < 1) showed two discrete domains of conversion: oxidation at temperatures below 350°C and SR at temperatures above 350°C. The presence of steam in the inlet gases is not necessary for SR to occur: there is sufficient water produced in the oxidation to form H₂ and carbon oxides by this reaction. Contrary to what was observed with Pt, an apparent deactivation between 310 and 385°C could be observed with Pd in oxidation. This is due to a reduction of PdO_x into Pd⁰, which is much less active than the oxide in propane oxidation. Steam added to the reactants inhibits oxidation while it prevents the reduction of PdO_x into Pd⁰. Compared to Pt and to Rh, Pd has a higher thermal resistance: no deactivation occurred after treatment up to 700°C and limited deactivation after treatment up to 900°C, provided that the catalyst is maintained in an oxygen-rich atmosphere during the cooling.     

The greenhouse effect; Impact upon and the role to be played by construction

The authors highlight several possible ways in which the construction industry could lower present emissions of the greenhouse gas, carbon dioxide. It is an excellent discussion document and is recommended reading.     

Effect of Bi and Sr concentrations on the formation of the 2223 phase in Bi-Pb-Sb-Sr-Ca-Cu-O materials, obtained under different conditions of thermal treatment

The superconducting properties and the phase and chemical composition of Bi _x Pb_0.3Sb_0.1Sr _y Ca₂Cu₃O_z (x=1.5, 1.6, and 1.7;y=1.9, 2.0, and 2.1) materials synthesized by one-step and multistep thermal treatments have been investigated. The multistep annealing between 825–875°C promotes the 2223 phase. The change of Bi concentration has little effect on the 2223 phase formation, regardless of the kind of thermal treatment used, but increasing the Sr concentration (y> 2) strongly inhibits this phase. It has also been established that the loss of Pb after synthesis depends on the initial Bi concentration. The loss of Pb decreases when the initial Bi content is lower.     

媒体网关控制技术及其在Alcatel 5020 MGC中的应用

分析了目前公用交换电话网(PSTN)中存在的问题和下一代网络(NGN)的优越性,分析了NGN中的关键技术媒体网关控制技术,探讨了媒体网关控制技术在Alcatel5020MGC中的实际应用,讨论了Alcatel5020MGC的软硬件系统架构。最后强调了在PSTN向NGN发展过程中基于演进产品的方法的重要性。     

GSM与WCDMA无线网络规划比较

WCDMA与GSM在空中接口上存在较大差异,WCDMA基于码分多址技术,GSM基于时分多址技术。GSM主要处理语音和低速数据,而WCDMA引入了多种速率的数据业务,根据业务的QoS进行资源控制和分配,因此在无线网络规划方法上,WCDMA与GSM存在较大差异。文章从容量规划、覆盖规划、蜂窝布局、规划流程、网络评估等方面对WCDMA与GSM的无线网络规划进行了比较和分析。     

Prediction of Final Product Properties After Cocurrent Spray Drying

The effect of drying and atomization conditions on the physical properties of powders for agglomerate-like materials and skin-forming material are studied in this article. A neural model is used for powder bulk and tapped density predictions.     

Investigation of texture effect on visual colour difference evaluation

The texture effect on visual colour difference evaluation was investigated in this study. Five colour centers were selected and textured colour pairs were generated using scanned textile woven fabrics and colour‐mapping technique. The textured and solid colour pairs were then displayed on a characterized cathode ray tube (CRT) monitor for colour difference evaluation. The colour difference values for the pairs with texture patterns are equal to 5.0 CIELAB units in lightness direction. The texture level was represented by the half‐width of histogram, which is called texture strength in this study. High correlation was found between texture strength and visual colour difference for textured colour pairs, which indicates that an increasing of 10 units of texture strength in luminance would cause a decreasing of 0.25 units visual difference for the five colour centers. The ratio of visual difference between textured and solid colour pairs also indicates a high parametric effect of texture. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 341–347, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.     

Validation of a Method of Determination of Apparent Diffusivity Versus Composition in Solids

A method is presented for computing the values of apparent diffusivity in solids with respect to the concentration of the diffusing substance (water or sodium chloride). This method does not require any assumption upon the mathematical relationship between diffusivity and concentration. It can be applied to experimental measurements of local concentration versus position within the solid (profiles) with relatively few measurements (circa 10) and a mathematical smoothing of the experimental data by using an artificial neural network model. The method was first validated on simulated data obtained by using a constant diffusivity value and on experimental profiles when the relation between diffusivity and concentration was given. It was then applied to original experimental moisture profiles obtained by putting gelatin gels with different initial moisture contents into contact for up to 14 days. The method was also successfully applied to five sets of experimental moisture and sodium chloride profiles taken from the literature and obtained from different food products. Apparent diffusivities calculated by our method were found in agreement with those obtained by authors using different numerical methods to compute the diffusivity values.