InGaAs（P）分别限制应变单量子阱激光器的优化设计

针对较常用的ＩｎＧａＡｓ（Ｐ）分别限制应变单量子阱激光器，给出了为得到最大净增益的优化设计参数。对于激射波长为１．５５μｍ的无应变激光器，最佳的光限制层波长为１．２４μｍ，厚度为１００ｎｍ。当阱材料引入压缩应变后．由于价带的有效状态密度减小，量子阱激光器的微分增益变大，阱深的增大对增大线性增益的效果更加明显．所以最佳光限制层的波长将变短，为１．２０μｍ     

Electrolytic regeneration of bleach solution in the motion picture industry

Cyclic voltammetric and galvanostatic experiments have been carried out with both synthetic and commercial bleach solutions with a view to regenerating the same. Maximum efficiency could be achieved if the oxidation is carried out below an anodic potential of 0·80 V vs SCE. The data obtained in galvanostatic experiments with RCE confirm the results of the earlier technique.     

CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING

The microstructure,alloying reaction and sintering behavior of the powder produced by Mechanical Al-loying(MA)for 8 h from 64 wt.-% Ti powder and 36 wt.-% Al powder were studied by scanning electronmicroscopy,optical microscopy,X-ray diffractometry,differential scanning calorimetry(DSC)and dilatometry.The mechanically alloyed powder partictes are Ti-Al composite particles.Thus,titanium aluminides can formeasily in the powder through diffusion during heat treatment.It is shown that the sintering behavior of this pow-der,different from the behaviors of TiAl alloy powder and mixed powder of 64 wt.-% Ti powder and 36 wt.-%Al powder,changes from expansion at temperatures below 1000℃ to shrinkage at temperatures above 1000℃.Homogeneously alloyed TiAl material with a density over 96% of the theoretical density can be produced fromthe mechanically alloyed powder by compaction-sintering.     

高硫石油焦燃烧固硫基础性研究及工业技术的进展

本文概述了高硫石油焦固硫的基础性研究及工业上的最新进展。     

用于光纤并带的UV固化胶粘剂性能的研究

研究了用于光纤带的紫外光固化胶粘剂的剥离性、柔韧性、拉伸强度和延伸率的影响因素。     

Possible Energy Network with polygeneration system and CCS for China

On basis of adopting polygeneration systems for power and alternative fuels,capturing CO2 with near zero energy penalties,and storing CO2 on sites,a new kind of Energy Network can integrate energy utilization,CO2 capture,transportation and storage synthetically.Techno-economic analysis of this solution focusing on Inner Mongolia and the Yangtze River Delta districts had been carried with comparison to the chain method for energy utilization and CO2 sequestration.This solution can save 21.5% of energy,and re...     

窄带滤光片光学极值法直接监控的光学设计

窄带滤光片是应用于光谱学、激光、天文物理学、通信等各个领域的光学组件,精确控制每一层膜厚是制备滤光片的困难所在.采用光学极值法直接监控工件,可以同时制备多件滤光片.设计了监控光路和信号获得电路,通过探测到的测试信号,监控薄膜膜厚,实现了直接监控.     

Fast method for SAR echo simulation of a three-dimensional ground scene

Due to huge calculation of SAR echo simulation of a three-dimensional (3D) ground scene, a fast simulation method is proposed. First, the data of a 3D ground scene are fractionally interpolated based on the Fractional Brownian Motion (FBM) model. Second, the data interpolated are divided into lots of small facets whose precision meets the simulation requirement, the backscattering coefficients of the small facets are calculated. Third, the shaded area is judged by the comparison method of overlook angles. Three parallel levels are analyzed and the kernel function is designed. Finally, the computing method of reduction adding and external thread are also utilized under the framework of GPU in order to get high efficiency. With the methods mentioned above, the imaging result of experimental DEM data verifies the validity and superiority of the proposed method.     

A new high accuracy method for two-dimensional biharmonic equation with nonlinear third derivative terms: application to Navier–Stokes equations of motion

In this paper, we propose a new compact fourth-order accurate method for solving the two-dimensional fourth-order elliptic boundary value problem with third-order nonlinear derivative terms. We use only 9-point single computational cell in the scheme. The proposed method is then employed to solve Navier–Stokes equations of motion in terms of streamfunction–velocity formulation, and the lid-driven square cavity problem. We describe the derivation of the method in details and also discuss how our streamfunction–velocity formulation is able to handle boundary conditions in terms of normal derivatives. Numerical results show that the proposed method enables us to obtain oscillation-free high accuracy solution.