Improved direct bonding method of Nd:YVO4 and YVO4 laser crystals

We succeeded in the fabrication of bonded laser crystals composed of a neodymium-doped YVO₄ laser crystal (Nd:YVO₄) and its host crystals YVO₄ by a newly developed dry etching technique using an argon ion beam. The optical distortion caused by the bonded interface of size 5 mm × 6 mm was estimated to be 0.05λ at 633 nm. From the comparison of laser performance pumped by a laser diode, the bonded crystals could increase the laser output power by nearly twice that of the non-bonded crystals with the same degree of polarization of 99.2%. To analyze the mechanism of the enhanced reduction of the thermal load in the bonded crystals, numerical simulations with a finite-element method were also performed.     

New developments in CdTe and CdZnTe detectors for X and γ-ray applications

There has been considerable recent progress in II-VI semiconductor material and in methods for improving performance of the associated radiation detectors. New high resistivity CdZnTe material, new contact technologies, new detector structures, new electronic correction methods have opened the field of nuclear and x-ray imaging for industrial and medical applications. The purpose of this paper is to review new developments in several of these fields. In addition, we will present some recent results at LETI concerning first the CdTe 2-D imaging system (20 × 30 mm² with 400 × 600 pixels) for dental radiology and second the CdZnTe fast pulse correction method applied to a 5 × 5 × 5 mm³ CdZnTe detector (energy resolution = 5% for detection efficiency of 85% at 122 keV) for medical imaging.     

带限信号高频重建的一种新的正则外推算法

本文提出生种新的带限信号的外推方法，该方法能够很好地抑制噪声干扰，且计算复杂性较低，本文给出算法，证明了收敛性，最后给出了误差计算机实验结果。     

用保形样条方法求解非定常对流扩散方程

在欧拉-拉格朗日分裂方法的基础上,本文发展了一种固定网格上的欧拉-拉格朗日分裂方法.保形样条方法(SPSM)被用来解决倒特征线插值问题.通过求解几个有精确解的例子,说明SPSM方法的解是单调无振荡的,并且数值耗散也是比较小的.     

Experimental and numerical investigation of fracture in double-edge notched steel plates

Double-edge notched (DENT) steel plates were pulled until complete fracture and several experimental observations were made (using profilometry and scanning electron microscopy). The essential work of fracture (EWF) model was found to be well verified. Numerical simulations—up to the maximum load only—of some experiments were performed using the finite element method (FEM), and incorporating geometric and material non-linearities (large deformation elasto-plasticity). Some experimental measurements were compared with the corresponding numerical computations and excellent agreement was found.     

Analysis of brushless three-phase synchronous generator without exciter

Recently, a demand for small-capacity generators has been increasing as electric sources in small ships and automobiles or as portable electric sources driven by engines. It is desired that the structure of small-capacity generators be simple and robust, and that the generators be highly reliable, easily maintained and controlled. This paper describes an analysis of the original brushless synchronous generator without exciter. The output voltage can be adjusted in the wide range by controlling the stator dc current. To analyze the characteristics of this generator, the finite element method is applied. It is found that the results of theoretical analysis agree well with the experimental results.     

滑移线场近似作图法的原理

给出了滑移线场近似作图法的原理、证明以及近似滑移线场的特点，为进一步利用计算机求解应力分布和变形规律，尤其是为近似滑移线的计算机绘制奠定了基础．     

参数三次B样条曲线的一种整体光顺方法

本文在能量法的基础上，提出了一种新的目标函数，给出了参数三次Ｂ样条曲线的一种新的整体光顺方法。利用这种方法得到的曲线不仅具有较小的应变能，而且曲率变化比较均匀，具有很好的光顺效果。该方法能推广到对曲面的光顺。     

在酸性介质中N-H伪酸Mannich反应机理的量子化学研究

用量子化学中的ＳＣＦ－ＭＯＡＭ１方法，全优化计算了以苯并唑酮为伪酸组分的（Ｎ－Ｈ酸）Ｍａｎｎｉｃｈ反应的反应物、过渡态和产物络合物的分子几何构型、电子结构和生成热。根据计算所得各反应的活化能，提出了该反应在酸性介质中的机理，即甲醛首先与苯并唑酮作用，其产物再与二甲胺作用生成Ｍａｎｎｉｃｈ碱，并就其缘由进行了讨论。     

迭代回归法计算T型电位滴定中试液含量

本文将迭代回归法计算Ｔ型电位滴定中，叙述了其原理及数学推导，并运算了一批实验数据，结果表明，该法准确度较高，且不需空白溶液校正。