吸湿凉爽机织物的结构设计与性能

为研究织物组织结构与复合纱线线密度对织物凉爽性能的影响,将线密度为7.4和9.8 tex涤纶分别与线密度为7.8 tex锦纶反向加捻、并线后作为纬纱,以8.3 tex涤纶/竹浆纤维50/50混纺纱作经纱,设计平纹、二上一下斜纹和透孔组织织物.测试织物的瞬间接触凉感、热湿舒适性能及织物干、湿态升温曲线,并采用凉爽温度指数对织物的综合凉爽性能进行评价.研究结果表明:6种设计织物的瞬间接触凉感均高于标准,且平纹织物最好,纬纱粗细对瞬间接触凉感影响不显著;透孔织物透气性最好,且在人体出汗的状态下具有较好的导湿散热性能.平纹织物凉爽温度指数最高,最大凉爽温度为2.8℃,综合凉爽性能最好.     

Facile modifications of polyimide via chloromethylation: II. Synthesis and characterization of thermocurable transparent polyimide having methylene acrylate side groups

From chloromethylated polyimide, a useful starting material for modification of aromatic polyimides, a thermocurable transparent polyimide having acrylate side groups was prepared. In the presence of 1,8‐diazabicyclo[5,4,0]undec‐7‐ene, chloromethylated polyimide was esterified with acrylic acid to synthesize poly(imide methylene acrylate). The polymer was soluble in organic solvent, which makes it possible to prepare a planar film by spin coating. The polymer film became insoluble after thermal treatment at 230 °C for 30 min. Optical transparency of the film at 400 nm (for 1 µm thickness) was higher than 98 % and not affected by further heating at 230 °C for 250 min. Adhesion properties measured by the ASTM D3359‐B method ranged from 4B to 5B. Preliminary results of planarization testing showed a high degree of planarization (DOP) value (>0.53). These properties demonstrate that poly(imide methylene acrylate) could be utilized as a thermocurable transparent material in fabricating display devices such as TFT‐LCD. Copyright © 2004 Society of Chemical Industry     

论王光祈的“少年中国”理想

王光祈的“少年中国”理想，是以“少年意大利”为基础，汲取五四时期社会主义思潮的积极成分而形成的。创造“少年中国”在“人”的方面，是从改造中国少年入手，同时注重青年学生与平民的改造，注重劳动阶级、智识阶级与资产阶级的改造与联合；在“事”的方面，积极开展社会事业和社会活动，且必须经过社会分工与国际分工。可见，他的这种理想是典型的社会改革主张，在早期带有无政府主义色彩，自始至终具有强烈的民族主义情感。     

种分Δα_k与精液Al_2O_3浓度的关系

对烧结法和拜尔法种分槽的Δαk 变化进行了概述 ,阐述了精液Al2 O3 浓度关系到晶种分解的产出率、分解率、氢氧化铝粒度及系统的液量平衡、能耗等 ,生产中要把握这些影响因素 ,确保氢氧化铝晶体的长大速度为正值。     

90平米开启住宅新时代

大力发展90平米以下中小套型住宅，不仅具有重大的现实意义，而且将对我国住宅建设的发展产生深远的影响。[编者按]     

探索小森

对于小森公司来说，最近几年在中国的销售业绩相当不错，小森印刷机在中国市场的占有率一直在稳步提高。中国的印刷市场正在高速增长，而小森能够取得如此佳绩，最根本的原因是积极应对世界印刷市场发展趋势，把深度满足用户的需求放在了首位，正如小森的企业理念——让客户感动。     

Advances in the management of bronchial asthma

The ultrastructure of rat precorneal tear film was visualized by the quick freezing-freeze substitution (QF-FS) method and the conventional fixative method under the scanning electron microscope (SEM). In the QF-FS method, the eyeballs of rats were quickly frozen with an isopentane-propane mixture cooled by liquid nitrogen applied directly to the eyes. After enucleating the eyes and fracturing the frozen corneas, the corneas were prepared for SEM observation. In contrast to the conventional fixative method, by which the microvilli of the surface epithelial cells could be visualized clearly, a very thin membrane-like structure was observed to cover the corneal surface in the eyes prepared by the QF-Fs method. Between the membrane-like structure and corneal surface, a homogeneous and fine network-like structure was observed. The results suggest that the structure of the tear film might be different from the one we have believed to consist of three layers until now. The QF-FS method is considered to be useful for the morphological study of the precorneal tear film.     

气体灭火自动控制装置的设计原理

通过科研成果转化的气体灭火系统目前己成为我所科技产业中的主导产品。其控制装置是其中关键配套设备。本文就其开发设计中的设计思想、技术原理、技术设计特色等作一阐述