Novel pearl millet couscous process for West African markets using a low-cost single-screw extruder

Traditional West African pearl millet couscous products are popular; however, their preparation is laborious, time-consuming and energy-demanding, involving agglomeration, steaming, drying and sieving steps. In this study, a process was developed to produce millet couscous using a high pressure, high temperature and low-cost single-screw extruder. The innovation was to directly process the cooked low-moisture extrudate to a couscous product by drying and milling to the appropriate particle size (ranging between 1 and 2 mm). Throughput for the traditional process as prepared for commercial sale is 50 kg per day, but with the same amount of labour, the extrusion process yields ~350 kg per day. A consumer sensory study held in Niamey (Niger) showed that the extruded millet couscous was comparable to traditional couscous, though this was dependent on selection of the proper millet variety. This novel extrusion process could stimulate small- to medium-scale manufacturing of couscous and couscous-type products in West Africa.     

RanGen: A Random Network Generator for Activity-on-the-Node Networks

In this paper, we describe RanGen, a random network generator for generating activity-on-the-node networks and accompanying data for different classes of project scheduling problems. The objective is to construct random networks which satisfy preset values of the parameters used to control the hardness of a problem instance. Both parameters which are related to the network topology and resource-related parameters are implemented. The network generator meets the shortcomings of former network generators since it employs a wide range of different parameters which have been shown to serve as possible predictors of the hardness of different project scheduling problems. Some of them have been implemented in former network generators while others have not.     

Study of the morphology and mechanical properties of polypropylene composites with silica or rice‐husk

The mechanical, morphological behavior and water absorption characteristics of polypropylene (PP) and silica, or PP and rice‐husk, composites have been studied. The silica used in this study as filler was a commercial type produced from soluble glass or rice husks. The compatibilizing effect of PP grafted with monomethyl itaconate (PP‐g‐MMI) and/or with vinyltriethoxysilane (PP‐g‐VTES) as polar monomers on the mechanical properties and water absorption was also investigated. In general, a high loading of the studied fillers in the polymer matrix increases the stiffness and the water absorption capacity. This effect is more noticeable in the tensile modulus of the PP/silica composite with PP‐g‐VTES as compatibilizer. However, the increase of the rice‐husk charge as a natural filler in the PP matrix decreases the stiffness, and in the presence of PP‐g‐MMI as compatibilizer in PP/rice‐husk, the tensile modulus and water absorption of the composite were improved. The better adhesion and phase continuity in the PP/silica and PP/rice‐husk composites with different compatibilizers was confirmed by the morphological study. Copyright © 2004 Society of Chemical Industry     

2,4,6‐Trichlorophenol and phenol removal in methanogenic and partially‐aerated methanogenic conditions in a fluidized bed bioreactor

A fluidized bed bioreactor (FBBR) was operated for more than 575 days to remove 2,4,6‐trichlorophenol (TCP) and phenol (Phe) from a synthetic toxic wastewater containing 80 mg L^?1 of TCP and 20 mg L^?1 of Phe under two regimes: Methanogenic (M) and Partially‐Aerated Methanogenic (PAM). The mesophilic, laboratory‐scale FBBR consisted of a glass column (3 L capacity) loaded with 1 L of 1 mm diameter granular activated carbon colonized by an anaerobic consortium. Sucrose (1 g COD L^?1) was used as co‐substrate in the two conditions. The hydraulic residence time was kept constant at 1 day. Both conditions showed similar TCP and Phe removal (99.9 + %); nevertheless, in the Methanogenic regime, the accumulation of 4‐chlorophenol (4CP) up to 16 mg L^?1 and phenol up to 4 mg L^?1 was observed, whereas in PAM conditions 4CP and other intermediates were not detected. The specific methanogenic activity of biomass decreased from 1.01 ± 0.14 in M conditions to 0.19 ± 0.06 mmolCH₄ h^?1 gTKN^?1 in PAM conditions whereas the specific oxygen uptake rate increased from 0.039 ± 0.008 in M conditions to 0.054 ± 0.012 mmolO₂ h^?1 gTKN^?1, which suggested the co‐existence of both methanogenic archaea and aerobic bacteria in the undefined consortium. The advantage of the PAM condition over the M regime is that it provides for the thorough removal of less‐substituted chlorophenols produced by the reductive dehalogenation of TCP rather than the removal of the parent compound itself. Copyright © 2005 Society of Chemical Industry     

Wernicke's encephalopathy and dialysis: report of two cases

Wernicke encephalopathy is considered a complication of dialytic therapy, but there are few reports of this complication. We report a 57 years old man and a 45 years old woman, with grade IV renal failure, who after acute peritoneodialysis and chronic hemodialysis respectively, had a confusional syndrome that responded to the administration of thiamine. CT scans in both patients discarded abnormal blood collections or new cerebrovascular episodes. The man bad two previous cerebrovascular episodes, a severe anemia that was corrected, angina and an episode of arrhythmia during the dialytic procedure previous to the confusional episode. The woman had an acute uremic syndrome and a concomitant urinary tract infection during the confusional episode. Wernicke encephalopathy must be suspected in patients in dialysis with confusional episodes.     

Oscillating superleak transducer of second sound: Amplitude and linewidth

Two oscillating superleak transducers, one serving as generator, the other as detector, of first and second sound, situated at opposite ends of a one-dimensional resonance cavity, are considered. Included in the analysis are the dissipative effects of normal viscous slip and thermal diffusion through the porous membrane. The calculated amplitude and linewidth of the receiver response, both close to and away from the membrane resonance, show good agreement with available experimental data.     

Targeting optimum resource allocation using reverse problem formulations and property clustering techniques

Decoupling the constitutive equations from the balance and constraint equations allows for reformulating a conventional forward problem into two reverse problems. The first reverse problem is the reverse of a simulation problem, where the process model is solved in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching the synthesis/design targets. Visualization of the problem is achieved by employing recently developed property clustering techniques, which allows a high-dimensional problem to be visualized in two or three dimensions. The clusters by definition satisfy intra-stream and inter-stream conservation through linear “mixing” rules, which allows for the development of consistent additive rules along with their ternary representation.     

Deep oxidation of VOC mixtures with platinum supported on Al2O3/Al monoliths

Pt impregnated metallic monoliths prepared from anodised aluminium foils were tested to study their catalytic activity in complete oxidation of volatile organic compound (VOC) mixtures. The VOCs oxidised were 2-propanol, toluene, methyl ethyl ketone (MEK), acetone and their mixtures. Complete oxidation was obtained in all cases except for the case of 2-propanol, where acetone was found as an oxidation intermediate. Even if the adsorption of the VOC on the Al₂O₃ is governed by its polarity, the reactivity is mainly affected by the competition of the oxygen atoms chemisorbed on the Pt particles.     

Automated model generation for performance engineering of building automation networks

Large technical systems need to be designed both reliable and efficient. Specialized design tools offer therefore a simplified, abstract design and extend details autonomously in the background. Analytic and simulation based models could improve the quality by testing and dimensioning the design before implementation, but setting up the necessary models is time-consuming and expensive. Therefore many developers ask for analysis tools which are able to create their models from the available information in the design tools. This paper presents such an automated modeling approach basing on an existing design database at the example of a network analysis for building automation fieldbuses. The process of automated modeling is unfolded, and the potentials and limitations are discussed.