Rectangular Section Control Technology for Silicon Steel Rolling

Rectangular section control technology(RSCT)was introduced to achieve high-precision profile control during silicon steel rolling.The RSCT principle and method were designed,and the whole RSCT control strategy was developed.Specifically,RSCT included roll contour design,rolling technology optimization,and control strategy development,aiming at both hot strip mills(HSMs)and cold strip mills(CSMs).Firstly,through the high-performance variable crown(HVC)work roll optimization design in the upper-stream stands and the limited shifting technology for schedule-free rolling in the downstream stands of HSMs,a hot strip with a stable crown and limited wedge,local spot,and single wave was obtained,which was suitable for cold rolling.Secondly,an approximately rectangular section was obtained by edge varying contact(EVC)work roll contour design,edge-drop setting control,and closed loop control in the upper-stream stands of CSMs.Moreover,complex-mode flatness control was realized by coordinating multiple shape-control methods in the downstream stands of CSMs.In addition,the RSCT approach was applied in several silicon-steel production plants,where an outstanding performance and remarkable economic benefits were observed.     

Effect of stoichiometry and Cu-substitution on the phase structure and hydrogen storage properties of Ml-Mg-Ni-based alloys

To improve the electrochemical properties of rare-earth–Mg–Ni-based hydrogen storage alloys, the effects of stoichiometry and Cu-substitution on the phase structure and thermodynamic properties of the ...     

Applications and Technologies of All-Solid State Blue Laser

1 Introduction Along with the matureness of laser diode (LD) manufacturing technology, the performance of LD has been improved greatly since 1980s, so various kinds of laser devices based on LD have been developed rapidly, especially the all-solid state lasers. After early experiments and researches, the all-solid state lasers have been commercialized successfully.     

传感器管理及其在相控阵雷达中的应用

传感器管理是数据融合的一部分。介绍了传感器管理的概念和框架 ,概述了国内外传感器管理算法的研究现状。主要工作是针对相控阵雷达这一传感器 ,通过对其不同工作模式以及不同参数的管理 ,来说明传感器管理的原理。提出了一种新的自适应采样周期算法 ,仿真结果表明该算法的优越性     

Measurement Method of the Thickness Uniformity for Polymer Films

Several methods for investigating the thickness uniformity of polymer thin films are presented as well their measurement principles.A comparison of these experimental methods is given.The cylindrical lightwave feflection method is found to can obtain the thickness distribution along a certain direction.It is simple and suitable method to evaluate the film thickness uniformity.     

苯磺隆干悬浮剂技术浅析

通过对苯磺隆干悬浮剂项目的研究,进一步了解干悬浮剂的加工工艺和配方中各种助剂的相互作用;剖析助剂对主要技术指标的影响。     

Estimation for the number of components in a mixture model using stepwise split-and-merge EM algorithm

The main difficulty with EM algorithm for mixture model concerns the number of components, say g. This is the question of model selection, and the EM algorithm itself could not estimate g. On the contrary, the algorithm requires g to be specified before the remaining parameters can be estimated. To solve this problem, a new algorithm, which is called stepwise split-and-merge EM (SSMEM) algorithm, is proposed. The SSMEM algorithm alternately splits and merges components, estimating g and other parameters of components simultaneously. Also, two novel criteria are introduced to efficiently select the components for split or merge. Experimental results on simulated and real data demonstrate the effectivity of the proposed algorithm.     

岩土体斜(边)坡滑坡发生的机理

根据滑坡发生的初始条件、滑坡成因及方式表象,对常见的蠕变倾覆滑坡、卸荷滑坡、震动液化平推滑坡、潜蚀塌陷滑坡、溶蚀下陷滑坡、孔隙水压浮动滑坡和人工切蚀或冲(浪)蚀—加载滑坡等机理进行了分析.     

电子束、离子束与蓝宝石相互作用的研究

研究了电子束、离子束作用于Al2O3表面时成分的变化，表明无论电子束或离子束都能使Al2O3发生分解，产生导电的元素Al。实验在PHI610·SAM上进行，电子束轰击下（3keV，O．5μA，入射角60°）10s就有元素Al分解出来，2min以后就达到饱和，分解析出量随时间成a（1－e－bt）的关系。离子束轰击下同样发生元素Al的分解，但当Ei＞3keV时，由于剥离速率加大，溅射5min时表面Al峰反而比1min时要弱。这时表面Al含量处于分解析出与溅射剥离的动态平衡中。实验还发现了Al2O3的解析与表面成分有关（如碳的含量）。最后讨论电子束与离子束的解析机理。     

Performance of advanced resuscitation skills by pediatric housestaff

OBJECTIVE: To describe pediatric housestaff resuscitation experience and their ability to perform key resuscitation skills. DESIGN: Cohort study of 63 pediatric residents in a university-based training program. PARTICIPANTS AND METHODS: Investigators observed, scored, and timed resident performance on 4 key resuscitation skills. Cognitive ability was tested with 4 written scenarios. Housestaff provided self-reports of the number of months since their last American Heart Association Pediatric Advanced Life Support course, number of mock and actual codes attended, number of times skills were performed, and self-confidence with respect to resuscitation. RESULTS: A total of 45 pediatric residents (71%) participated. Median cognitive score was 5 (range, 1-5). Of all residents, 44 (97%) successfully bag mask-ventilated the mannequin; 24 (53%) and 36 (80%) used the correct bag and mask size, respectively. Thirty-nine residents (87%) placed a tube in the mannequin trachea, 12 (27%) checked that suction was working prior to intubation, and 30 (67%) chose the correct endotracheal tube size. Forty residents (89%) discharged the defibrillator, and 25 (56%) and 32 (71%) correctly chose asynchronous mode and infant paddles, respectively. Thirty-eight residents (84%) inserted an intraosseous line; 35 (78%) had correct placement. Median times for successful skill completion were 83 seconds for bag mask ventilation, 136 seconds for intubation, 149 seconds for defibrillation, and 68 seconds for intraosseous line placement. CONCLUSION: Pediatric housestaff previously trained in pediatric advanced life support were generally able to reach the end point of 4 key resuscitation skills but less frequently performed the specific subcomponents of each skill. This poor performance and the prolonged time to skill completion suggest the need for greater attention to detail during training.