Voltage sag compensation with minimum energy injection by use of a micro‐SMES

This paper presents a method to compensate voltage sags with minimum energy injection for a series‐connected voltage restorer using a micro‐SMES. A circuit for extracting the fundamental symmetrical components from sag voltages and a minimum energy injection algorithm is described. Simulations of voltage sag compensation have been carried out using PSCAD/EMTDC for various faults. The simulation results confirm the validity of the proposed method and show the possibility of reducing the size of energy storage devices. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(3): 70–80, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10047     

Gas absorption accompanied by an instantaneous irreversible reaction in laminar falling films of pseudoplastic liquids

Gas absorption accompanied by an instantaneous irreversible chemical reaction into laminar falling films of power-law liquids was studied theoretically. The convective-diffusion equations for a solute gas and a liquid-phase reactant were solved numerically and the numerical solution for the reaction factor was obtained as a function of the Graetz number, the concentration ratio, the diffusivity ratio and the power-law index of the liquid.     

An energy trading system with consideration of CO2 emissions

Abatement of CO₂ emission is one of the most important issues in the 21st century regarding preservation of the earth environment. This paper addresses a utility operations planning problem for distributed energy management systems (DEMSs), where we are to obtain optimal plans that minimize both costs and CO₂ emissions. A DEMS consists of multiple entities that seek their own economic profits. In this paper, we give a mathematical formulation of the utility operations planning problem for each entity, and propose an energy trading market, which utlizes a multi‐attribute auction protocol in order to deal with both a price and a CO₂ emission rate. Experimental results show that collaboration among entities through the market provides a more profitable plan for each entity and abatement of CO₂ emission is also achieved. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(4): 54–63, 2008; Published online in Wiley InterScience ( www.interscience.wiley. com ). DOI 10.1002/eej.20418     

Configuration of a voltage sag compensator by use of a micro‐SMES and experimental results

A voltage sag compensating using a micro‐SMES is presented. Based on previous works, we have carried out experiments for voltage sag compensation on the laboratory‐built system in order to validate the proposed minimum energy injection voltage sag compensation algorithm. To improve the compensating performance of the system, two‐degree‐of‐freedom voltage control is proposed. In this paper, the circuit configuration and feedback voltage control system of the compensator are described and the experimental results are reported. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 148(2): 84–92, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10267     

Enrichment and characterization of chlorinated organophosphate ester-degrading mixed bacterial cultures

Chlorinated organophosphate ester (OPE)-degrading enrichment cultures were obtained using tris(2-chloroethyl) phosphate (TCEP) or tris(1,3-dichloro-2-propyl) phosphate (TDCPP) as the sole phosphorus source. In cultures with 46 environmental samples, significant TCEP and TDCPP degradation was observed in 10 and 3 cultures, respectively, and successive subcultivation markedly increased their degradation rates. 67E and 45D stable enrichment cultures obtained with TCEP and TDCPP, respectively, completely degraded 20 muM of the respective compounds within 6 h and also the other, although the degradation rate of TCEP by 45D was relatively slow. We confirmed chloride ion generation on degradation in both cases and the generation of 2-chloroethanol (2-CE) and 1,3-dichloro-2-propanol (1,3-DCP) as metabolites of TCEP and TDCPP, respectively. 67E and 45D also showed dehalogenation ability toward 2-CE and 1,3-DCP, respectively. Addition of inorganic phosphate did not significantly influence their ability to degrade the chlorinated OPEs but markedly increased their dehalogenation ability, which was maximum at 0.2 mM of inorganic phosphate and decreased at a higher concentration. Denaturing gradient gel electrophoresis analysis showed that dominant bacteria in 67E are related to Acidovorax spp. and Sphingomonas spp. and those in 45D are Acidovorax spp., Aquabacterium spp., and Sphingomonas spp. This analysis indicated the relationship of the Sphingomonas- and Acidovorax-related bacteria with the cleavage of the phosphoester bond and dehalogenation, respectively, in both cultures. This is the first report on bacterial enrichment cultures capable of degrading both TCEP and TDCPP.     

Degradation of organophosphorus pesticides in aqueous extracts of young green barley leaves (Hordeum vulgare L)

The degradation of the organophosphorus pesticides malathion, chlorpyrifos, guthion, diazinon, methidathion and parathion in an aqueous extract of young green barley leaves (Hordeum vulgare L) was monitored by gas chromatography. Aqueous solutions of various amounts of freeze‐dried young barley leaves containing 5.75 mg l⁻¹ of malathion were incubated at 37 °C and pH 7.4 over prolonged time periods. Over 95% of the malathion degraded in 4 h in a 3% (30 g l⁻¹) solution of young green barley leaves. When the barley solution was autoclaved at 120 °C for 25 min prior to the addition of malathion, no degradation of malathion was observed. When 10 mg l⁻¹ each of the above six pesticides was incubated in a 15% (150 g l⁻¹) solution of young green barley leaves for 3 h at 37 °C and pH 7.4, malathion and chlorpyrifos degraded 100%, whereas parathion (75%), diazinon (54%), guthion (41%) and methidathion (23%) showed lesser degrees of degradation. © 1999 Society of Chemical Industry     

Study of the Interface between Steel Insert and Aluminum Casting in EPC

The effective surface treatment method for steel insert composited with Al base metal by expendable pattern casting （EPC） process and the bonding interface between steel insert and Al base metal were investigated.It was found that Zn plating on steel insert was effective on improving the bonding property between steel insert and Al base metal in EPC process.Zn is thought to promote the formation of diffusion layer.But almost none content of Zn was observed in the boundary which had been plated on the steel insert.A diffusion layer consisting of Al,Si and Fe was formed at the insert/alloy interface and its hardness was higher than the steel insert as matter of course Al base metal.This layer turned out to be intermetallic compounds of Al-Si-Fe system.Higher pouring temperature promoted the diffusion of Fe into Al alloy,so Fe content in intermetallic layers increased at higher pouring temperature.The layer nearest to steel disappeared due to applied pressure.     

A control strategy for active filters using quasi‐instantaneous positive sequence extraction filters

A novel control strategy for active filters, employing quasi‐instantaneous positive sequence extraction of utility voltage, can be useful in harmonic polluted and/or imbalanced utility voltage. In this paper, the authors examined its transient response, its performance under the change of fundamental frequency of utility voltage and its performance under utility voltage with harmonics and unbalance. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 148(1): 54–65, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10307