Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.     

Production of antimicrobially active silk proteins by use of metal‐containing dyestuffs

The work presented here discusses a new technique for preparing silk fibers and films with persistent antimicrobial activity through use of metallic dyestuffs during the fiber dyeing process. The length of the silk fibers investigated contracted when the fibers were immersed in concentrated neutral salt solutions, such as calcium or potassium nitrate, at elevated temperature levels. The birefringence and molecular orientation of the silk fibroin molecules became less ordered by the action of the neutral salt solutions, resulting in increased dyestuff absorption. Subsequently, contracted silk fibers were dyed with metallic dyestuffs containing Cr or Cu for the purpose of obtaining silk fibers with antimicrobial activity. Silk fibers dyed with metallic dyestuffs showed significant antimicrobial activity against the plant pathogen Cornebacterium and the human pathogen Coli bacillus. Tensile strength of the silk fibers after the salt shrinking and dyeing processes did not show a significant change, whereas the elongation at break was increased slightly. The techniques described here for preparing significantly active antimicrobial silk fibers are effective and economic ways of providing new materials for industrial and biomedical applications. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1181–1188, 2002     

Enhancement of low density lipoprotein binding to both low density lipoprotein receptor-positive and- negative cells by tetracycline antibiotics

Some tetracycline (TC) antibiotics, including TC and anhydrotetracycline, have been found to enhance specific binding of low density lipoprotein (LDL) to both LDL receptor-positive and-negative cells at relatively higher concentrations. When incubated at 37°C, the ability of LDL receptor-negative human fibroblasts to bind ¹²⁵I-LDL was increased from<2 to 45 ng/mg by 170 μM TC. In normal human fibroblasts and Hep G2 cells, ¹²⁵I-LDL binding was elevated 1.4- to 2-fold by 113 μM TC. The ¹²⁵I-LDL binding in the presence of TC was diminished by both heparin and EDTA. The enhancement by TC was not observed when ¹²⁵I-LDL binding was assayed at 4°C. TC enhanced LDL binding to paraformaldehyde-fixed Hep G2 cells, excluding LDL receptor induction in the mechanism. These results demonstrated that TC enhanced cellular LDL binding through a process not involving functional LDL receptors.     

Precipitation phenomena in and electrical resistivity of high-temperature treated langatate (La3Ta0.5Ga5.5O14)

La(3)Ta(0.5)Ga(5.5)O(14) (LTG) single crystals, which have no phase transition up to the melting point, were heat-treated in air at temperatures from 1000°C to 1450°C for 10 h. LaTaO(4) (LT) and LaGaO(3) (LG), which coexist with LTG in the three-phase region on the Ga-poor side, precipitated on the surface of the crystal for heat treatments above 1300°C because of Ga evaporation during the heat treatment. The Ga-poor state near the surface of the 1450°C heat-treated specimen was confirmed by electron probe micro-analysis measurements. The electrical resistivity of LTG single crystals decreased by heat treatment in the range of 1000°C to 1200°C for 10 h in air, where no precipitation was observed, whereas the resistivity increased with heat treatment over 1400°C for 10 h in air. The electrical resistivity of the Ga-poor surface region was higher than that of the interior.     

Crystallographic, Thermoelectric, and Mechanical Properties of Polycrystalline Ba8Al x Si46−x Clathrates

The Al content dependence of crystallographic, thermoelectric, and mechanical properties is reported for polycrystalline Ba₈Al _x Si_46?x (nominal x = 15 to 17) clathrates prepared by combining arc melting and spark plasma sintering methods. The elastic constants and the coefficient of thermal expansion (CTE), which are also important properties for designing thermoelectric devices, are presented. Powder x-ray diffraction, scanning electron microscopy, and energy-dispersive x-ray spectroscopy (EDX) indicate that the type I clathrate is the major phase of the samples but impurity phases (mainly BaAl₂Si₂, Si, and Al) are included in the samples with high Al contents. The actual Al content x determined by EDX ranges from approximately 14 to 15. The absolute value of the Seebeck coefficient increases and the electrical conductivity decreases as the Al content increases. The changes in Seebeck coefficient and electrical conductivity are explained in terms of the dependence of the carrier concentration on the Al content. The elastic constants and the CTE of the samples depend weakly on the Al content. Some of the properties are compared with reported data of single crystals of Ba₈Al₁₆Ge₃₀, Ba₈Ga₁₆Ge₃₀, Sr₈Ga₁₆Ge₃₀, silicon, and germanium as standard references. The effective mass, Hall carrier mobility, and lattice thermal conductivity, which govern the transport properties, are determined to be ~ 2.4m ₀, ~ 7 cm² V^?1 s^?1, and ~ 1.3 W m^?1 K^?1, respectively, for actual Al content x of about 14.77. The thermoelectric figure of merit ZT is estimated to be about 0.35 at 900 K for actual Al content x of about 14.77.     

Complex formation of SMAP/KAP3, a KIF3A/B ATPase motor-associated protein, with a human chromosome-associated polypeptide

We have recently isolated SMAP (Smg GDS-associated protein; Smg GDS: small G protein GDP dissociation stimulator) as a novel Smg GDS-associated protein, which has Armadillo repeats and is phosphorylated by Src tyrosine kinase. SMAP is a human counterpart of mouse KAP3 (kinesin superfamily-associated protein) that is associated with mouse KIF3A/B (a kinesin superfamily protein), which functions as a microtubule-based ATPase motor for organelle transport. We isolated here a SMAP-interacting protein from a human brain cDNA library, identified it to be a human homolog of Xenopus XCAP-E (Xenopus chromosome-associated polypeptide), a subunit of condensins that regulate the assembly and structural maintenance of mitotic chromosomes, and named it HCAP (Human chromosome-associated polypeptide). Tissue and subcellular distribution analyses indicated that HCAP was ubiquitously expressed and highly concentrated in the nuclear fraction, where SMAP and KIF3B were also present. SMAP was extracted as a ternary complex with HCAP and KIF3B from the nuclear fraction in the presence of Mg-ATP. The results suggest that SMAP/KAP3 serves as a linker between HCAP and KIF3A/B in the nucleus, and that SMAP/KAP3 plays a role in the interaction of chromosomes with an ATPase motor protein.