超低失真多层陶瓷电容相较于薄膜电容的优势

在滤波应用中,超低失真的表面贴装多层陶瓷电容(MLCC),已经成为模拟电路设计者在SMD塑料薄膜(薄膜片式)电容之外的另一种选择,它的体积更小、成本更低、也更为可靠。这些潜在的模拟电路应用实例包括:音响设备、无线设备、锁相环(PLL)和通信设备(如调制/解调器)等。这些新型电容的等效串连电阻(ESR)极低,因此非常适合于高效率的DC/DC变换器和高速微处理器应用。低失真电容的应用随着处理器速度的提高和工作电压的降低,噪声会给信号完整性带来严重的影响,除非能通过过滤或解耦的办法将其去除。在声频、射频、PLL和通信电路中,跟踪误差…     

合成己二腈反应技术研究——(Ⅴ)己二腈工业反应过程模拟与反应器改造

对己二腈工业反应器提出了两釜串联带回流的模型,通过模拟计算得出模型的级间返混系数 f=6的结论。该模型能较好地预测工业反应器中物料组分浓度变化和气、液两相的流动特性;指出了现工业反应器的鼓泡中和段体积偏小是造成己二酸浓度偏高的关键;提出了可以通过增加串连一个鼓泡预反应段的改造方案,能有效地降低己二酸的浓度,从7%降至4%左右,从而能较好地减缓腐蚀和结焦。     

一个面向语义的解释器自动生成技术

本文给出从指称语义自动生成解释器后端的一种技术.解释器被表示成PASCAL_like形式.     

Two-dimensional map of Haemophilus influenzae following protein enrichment by heparin chromatography

Two-dimensional gel electrophoresis separates several hundred protein molecules in one single experiment and is efficiently used to study the products expressed by different genomes. Low-copy-number gene products are invisible on a stained two-dimensional map and must be enriched such that sufficient amounts are present for visualization and identification. We investigated the enrichment of proteins of the bacterium Haemophilus influenzae by chromatography on immobilized heparin which has affinity for growth and protein biosynthesis factors. Total soluble proteins of the microorganism were fractionated on Heparin-Actigel which resulted in enrichment of approximately 160 proteins. The eluates, representing about 40% of the applied proteins, were analyzed by two-dimensional gel electrophoresis and the protein spots were characterized by amino acid composition analysis and matrix-assisted laser desorption ionization mass spectrometry. The proteins enriched by chromatography on the heparin gel were not exclusively low-copy-number gene products and they did not exclusively belong to one single class of proteins. The proteins that bound to the heparin gel are indicated in a two-dimensional protein map which includes more than 110 newly identified proteins.     

Hindered and compression settling: parameter measurement and modelling.

The Vesilind settling velocity function forms the basis of flux theory used both in state point analysis (for design and capacity rating) and one-dimensional dynamic models (for dynamic process modelling). This paper proposes new methods to address known shortcomings of these methods, based on an extensive set of batch settling tests conducted at different scales. The experimental method to determine the Vesilind parameters from a series of bench scale settling tests is reviewed. It is confirmed that settling cylinders must be slowly stirred in order to represent settling performance of full scale plants for the whole range of solids concentrations. Two new methods to extract the Vesilind parameters from settling test series are proposed and tested against the traditional manual method. Finally, the same data set is used to propose an extension to one-dimensional (1-D) dynamic settler models to account for compression settling. Using the modified empirical function, the model is able to describe the batch settling interface independently of the number of layers.     

关于彩涂压型钢板构件设计中的选材问题

近年来 ,在彩涂压型钢板构件设计应用中 ,由于不重视、不了解如何合理选材 ,在实际工程的材料订货中也都不提出对材料性能的技术要求 ,致使供货材质、材性不能满足使用要求 ,存在降低彩板构件承载力或减少其使用寿命的隐患 ,应引起设计人员的注意。同时对当前如何按使用条件及材料供应条件合理地选定彩板材料的性能技术要求 ,包括基板钢材的级别及力学性能、板厚及公差控制要求、镀锌层质量与彩涂层类别以及参照的技术标准等 ,提出了一些建议 ,供设计应用参考。最后还对板的强度、厚度以及镀铝锌板的选用问题进行了讨论     

Integrated Automation System for Rare Earth Countercurrent Extraction Process

Lower automation level in industrial rare-earth extraction processes results in high production cost, inconsistent product quality and great consumption of resources in China. An integrated automation system for extraction process of rare earth is proposed to realize optimal product indices, such as product purity, recycle rate and output. The optimal control strategy for output component, structure and function of the two-gradcd integrated automation system composed of the process management grade and the process control grade were discussed. This system is successfully applied to a HAB yttrium extraction production process and was found to provide optimal control, optimal operation, ontimal management and remarkable benefits.     

新型光电混合式电流互感器设计

设计了一种光电混合式电流互感器,它由传感头、光纤传输和光电转换器、信号处理电路和工作电源4部分组成。这种结构具有绝缘性能高、可靠性强、质量小等特点,并对误差情况进行了分析。