Improving gelling properties of myofibrillar proteins incorporating with cellulose micro/nanofibres

The effects of cellulose microfibres (CMFs, Average size: 100 ± 5 μm) and cellulose nanofibres (CNFs, Average size: 60 ± 3 nm) on the properties of myofibrillar protein (MP) gels from duck breast meat were studied. The results demonstrated that CMFs and CNFs were mostly connected to MP by non-covalent bonds, the diffusion and cross-linking of MP molecules was promoted, and a denser and more complete gel network was formed. With the increases of CMFs and CNFs concentration (0–10%), the hardness was increased by 13.15% and 19.78% for CMFs10% and CNFs10% gels, respectively, and the elasticity was increased by 40% and 80%, respectively. At the same concentration (0–10%), the increase in gel hardness, viscoelasticity and immobilised water content was greater in the CNFs-MP group than in the CMFs-MP group. The CNFs-MP group had a tighter gel network, and CNFs had a better potential to improve the gelation performance of MP.     

Effect of Al2O3 Addition on Mineralogical Modification and Crystallization Kinetics of a High Basicity BOF Steel Slag

Metallurgical and Materials Transactions B - Basic oxygen furnace (BOF) steel slag is a main byproduct that is produced during the converter steelmaking process. The volume instability and fast...     

4G通信技术的FPGA远程更新系统设计

为了解决在恶劣环境、偏远地区等特殊场合的FPGA远程更新问题,提出了一种基于4G无线通信技术的FPGA远程更新系统设计方法。应用4G无线通信模块实现了更新控制器的通信组网,远程控制器通过4G网络与更新控制器建立通信连接,下发控制命令实现FPGA的远程更新。通过实际测试验证了新方法的可行性、正确性,有效弥补了传统更新方法布线复杂、效率低、距离短等不足,提高了设备维护效率、降低了维护成本,对工程应用具有重大意义。     

坚持立德树人培养高素质电子信息工程人才

本文阐述了立德树人的含义和重要性,结合工作实践,提出了在新形势下实现学生思想政治教育素质化的思路和途径,并以系党总支工作为出发点,探索出了一套立德树人具体办法和措施,为培养高素质专门人才提供有力保障.     

基于ARID控制系统的固定式海洋风机纵摇控制

针对固定式海洋风机在随机风浪载荷及其联合作用下产生的具有倒立摆运动特征的纵摇,研究采用主动转动惯量驱动系统(Active Rotary Inertia Driver, ARID)对海洋风机纵摇进行控制的问题。ARID控制系统通过伺服电机驱动转动惯性质量产生控制结构摆动的最优力矩,从而减小海洋风机的纵摇运动。基于拉格朗日原理建立海洋风机-ARID控制系统的理论分析模型;采用Simulink对海洋风机-ARID控制系统的有效性进行验证,并分析系统参数(控制算法参数、转动惯量比等)对控制效果的影响规律;设计海洋风机-ARID控制系统的振动台试验,设置多种载荷激励形式,验证控制系统的稳定性与广谱有效性。数值模拟和试验结果均验证了所建立的分析模型的正确性,表明ARID控制系统对风机的纵摇运动具有显著的控制作用,为ARID控制系统在具有倒立摆运动规律的工程结构中的应用奠定理论基础。     

水龙头注射模的设计

分析了水龙头的塑件工艺特点，介绍了水龙头注射成形模结构及模具的工作过程。模具设计的结构特点是侧浇口形式的单分型面，为侧向抽芯注射模。经过生产验证，该模具结构设计巧妙，操作方便，使用寿命长，塑件达到技术要求。     

基于Word2000平台的辅助教学系统的开发

以MS Word2000为平台，通过MS Word2000中自带的Visual Basic编辑器开发辅助教学系统。着重实现三个方面的功能：学生管理模块、公式编辑器模块和图形编辑器模块，并与目前存在的软件的相应功能进行了比较和分析，对同类软件的开发有很高的借鉴价值。     

公路施工技术及道路路面施工质量控制对策研究

提高公路工程施工质量是人们不断的追求和目标。文章介绍了公路路基、路面施工技术，指出了道路路面施工质量控制的意义，并提出相应的质量控制对策。     

Dead‐time elimination SVPWM of six‐leg inverter

We present a six‐leg voltage source inverter (VSI) with a single DC link to feed a three‐phase inductive load. The space vector pulse width modulation (SVPWM) of the six‐leg inverter is studied in detail. The novel switching strategy in one sampling period for H bridge is proposed to avoid the 180° phase shift of the PWM signals for upper and lower side switches. Based on the novel switching strategy, a dead‐time elimination SVPWM is proposed, which can be easily implemented on a digital signal processor. Experimental results are presented to demonstrate the validity and features of the proposed novel SVPWM. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

转换层超重钢桁架高空吊装施工技术

某工程酒店部分采用钢结构与混凝土相结合的劲性结构,在4层标高14.650m设备层处开始为超重钢转换桁架.整个劲性钢筋混凝土转换桁架跨度36m,单节钢梁最大重量为23.6t,钢结构安装位置超出了塔吊起吊范围.项目部通过技术攻关,采用50 t吊车吊装到设计标高,铺设槽钢枕木轨道,利用滑轮组和塔吊安装就位的创新施工技术,成功地解决了起重转换桁架的高空吊装难题,确保了主体结构施工安全顺利进行.