Improving gelling properties of myofibrillar proteins incorporating with cellulose micro/nanofibres

The effects of cellulose microfibres (CMFs, Average size: 100 ± 5 μm) and cellulose nanofibres (CNFs, Average size: 60 ± 3 nm) on the properties of myofibrillar protein (MP) gels from duck breast meat were studied. The results demonstrated that CMFs and CNFs were mostly connected to MP by non-covalent bonds, the diffusion and cross-linking of MP molecules was promoted, and a denser and more complete gel network was formed. With the increases of CMFs and CNFs concentration (0–10%), the hardness was increased by 13.15% and 19.78% for CMFs10% and CNFs10% gels, respectively, and the elasticity was increased by 40% and 80%, respectively. At the same concentration (0–10%), the increase in gel hardness, viscoelasticity and immobilised water content was greater in the CNFs-MP group than in the CMFs-MP group. The CNFs-MP group had a tighter gel network, and CNFs had a better potential to improve the gelation performance of MP.     

Rheological phase reaction synthesis and electrochemical performance of LiFe2/3Mn1/3PO4/C cathode for lithium-ion batteries

LiFe_2/3Mn_1/3PO₄/C composite was prepared by the rheological phase reaction using LiH₂PO₄, Li₂CO₃, FePO₄, Mn(Ac)₂·4H₂O and ascorbic acid as starting materials. The crystal structure and morphology of as-synthesized sample were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The analysis of XRD results showed that the obtained sample was single-phase with orthorhombic olivine-type structure (Pnma space group). SEM micrographs revealed that the sample was aggregates, with an irregular morphology. The initial discharge capacity was 166.9, 149.1, 139.6, 112.8, 82.93 mAh g^??1 at the rate of 0.1, 0.5, 1, 2, and 10 C, respectively. And when the rate was 0.1, 0.5, 1, 2, and 10 C, the capacity retention was 92.2%, 90%, 92.9%, 97.6%, 91.5% after 50, 100, 200, 200, 500 cycles, respectively.

     

关于构建中国移动天地一体应急通信平台的探讨

为确保特殊时期党政军指挥通信畅通，充分利用中国移动现网资源，将卫星通信与地面光缆、微波传榆。以及移动网络无缝衔接，共同构建中国移动天地一体应急通信平台。     

Stable redesign of predictive control

The paper deals with I/O versions of receding horizon controllers based on the minimization of multistep quadratic costs with the constraint that the terminal state goes to zero. The resulting control law yields stable closed-loop systems under sharp conditions. Simulation results are presented to both verify the theoretical analysis and relate the new control law with GPC     

�������п�̽��Ŀ��������

��Based on the general and specific policies of enterprise reform formulated by the Central Committee of the Communist Party of China and according to the management method of the capital construction projects, considering the characteristics of exploration and combining the practice, this paper presents some exploratory opinions on the exploration project management for discussing.     

单相NPC型H桥级联逆变器电容电压不均与环流相互作用机理及建模研究

针对单相NPC型H桥级联逆变器并联时环流与电容电压不均的相互关系进行研究。通过环流等效电路推导了一个开关周期内环流与电容电压不均之间的数学关系,发现电容电压不均差异是环流的激励源之一;同时环流会改善一台并联逆变器的电容电压不均,恶化另一台逆变器的电容电压不均。为建立周期稳态条件下的环流-电容电压不均数学模型,提出采用“假设—建模—求解—检验—校正”的建模思路建立了基于阻滞的环流作用模型,有效避免了多因素建模的复杂性,同时提高了模型的准确性,仿真和试验结果表明,基于阻滞的环流作用模型拟合决定系数可达0.963 8和0.945 0,证明了环流模型的准确性。     

计及需求响应的含间歇式可再生能源电力系统的多目标优化调度

建立计及需求响应的含风光发电电力系统的多目标优化调度模型.将实时电价和可中断负荷两种需求响应项目融入模型中,引入备用容量成本系数和碳排放价格,并根据实时电价对弃风量进行经济惩罚,以经济和环保成本之和最小建立目标函数.对可再生能源的收购政策、备用容量提供方案以及两种需求响应项目的效果进行比较,并分析模型参数的敏感性.算例分析表明:全额收购光电、允许适当弃风的方案使调度更加灵活;需求响应降低了风电波动对系统的影响,优化了机组组合方案,提高了系统的经济和环境效益.     

长轴表面激光淬火变形与控制

应用激光淬火强化技术控制长轴的淬火变形，分析了激光淬火变形的原因和影响因素。研究结果表明，激光淬火不仅可使长轴振摆变形量控制在很小的范围内，而且可将已变形的长轴校直到很高的精度。     

非贵金属催化5-羟甲基糠醛选择氧化的研究进展

5-羟甲基糠醛（HMF）作为一种连接生物质资源和精细化学品工业的多功能平台化合物,因含有醛基、羟甲基而具有非常活泼的化学性质。HMF催化选择氧化在生物质转化过程中具有十分重要的意义,近年来受到研究者们的广泛关注。其氧化产物如2,5-呋喃二甲醛（DFF）和2,5-呋喃二甲酸（FDCA）都是具有高附加值的精细化学品,可用于抗菌剂、医药中间体、合成聚酯等方面。非贵金属催化剂因具备低成本、资源丰富以及环境友好的优势,用于HMF选择氧化的相关报道已逐渐增多。阐述了HMF选择氧化的催化反应机理,着重从非贵金属催化剂的角度出发,对近年来HMF的不同催化氧化体系进行了总结和归纳。最后,展望了HMF选择氧化的研究前景,为构建绿色、高效的催化体系提供思路和参考。     

重芳烃轻质化催化剂n（Ni）/n（Ni+Mo）的优化与分析

以β分子筛为载体,在保持金属总负载量不变的情况下,采用等体积浸渍法制备了4种不同n（Ni）/n（Ni+Mo）的催化剂。分别采用X射线衍射（XRD）、比表面积测试（BET）、氨程序升温脱附（NH₃-TPD）、氢程序升温还原（H₂-TPR）、氢程序升温脱附（H₂-TPD）和热重-差热分析（TG-DTG）等方法对催化剂进行了表征。结果表明,4种催化剂的酸量和酸强度相近,在n（Ni）/n（Ni+Mo）等于基准+0.2时,Mo与载体之间的相互作用最弱,其氢气吸附量最多且积炭量最少;采用某炼厂重整C₁₀⁺ 重芳烃对4种催化剂进行评价,结果表明n（Ni）/n（Ni+Mo）等于基准+0.2催化剂具有最优的催化活性和稳定性。上述结果表明,影响重芳烃轻质化催化剂活性和稳定性的关键因素是催化剂氢气吸附量的多少,氢气吸附量越多金属表面的溢流氢效应越明显,积炭前驱体被溢流氢及时消除,从而保护了催化剂的加氢活性中心不被积炭覆盖,有助于催化剂在较高活性下保持稳定。