Current trends in structural development and modification strategies for metal-organic frameworks (MOFs) towards photocatalytic H2 production: A review

Photocatalytic H₂ generation using semiconductor photocatalysts is considered as a cost-effective and eco-friendly technology for solar to energy conversion; however, the present photocatalysts have been recognized to depict low efficiency. Currently, porous coordination polymers known as metal-organic frameworks (MOFs) constituting flexible and modifiable porous structure and having excess active sites are considered to be appropriate for photocatalytic H₂ production. This review highlights current progress in structural development of MOF materials along with modification strategies for enhanced photoactivity. Initially, the review discusses the photocatalytic H₂ production mechanism with the concepts of thermodynamics and mass transfer with particular focus on MOFs. Elaboration of the structural categories of MOFs into Type I, Type II, Type III and classification of MOFs for H₂ generation into transition metal based, post-transition metal based, noble-metal based and hetero-metal based has been systematically discussed. The review also critically deliberate various modification approaches of band engineering, improvement of charge separation, efficient irradiation utilization and overall efficiency of MOFs including metal modification, heterojunction formation, Z-scheme formation, by introducing electron mediator, and dye based composites. Also, the MOF synthesized derivatives for photocatalytic H₂ generation are elaborated. Finally, future perspectives of MOFs for H₂ generation and approaches for efficiency improvement have been suggested.     

Hybrid wideband transceiver design for achievable rate maximization in millimeter-wave MIMO systems

Telecommunication Systems - This paper proposes two algorithms for hybrid (Analog–Digital) beamforming in a single-user millimeter-wave (mm-wave) multi-input multi-output (MIMO) systems under...     

A review on fault detection and diagnosis techniques: basics and beyond

Safety and reliability are absolutely important for modern sophisticated systems and technologies. Therefore, malfunction monitoring capabilities are instilled in the system for detection of the incipient faults and anticipation of their impact on the future behavior of the system using fault diagnosis techniques. In particular, state-of-the-art applications rely on the quick and efficient treatment of malfunctions within the equipment/system, resulting in increased production and reduced downtimes. This paper presents developments within Fault Detection and Diagnosis (FDD) methods and reviews of research work in this area. The review presents both traditional model-based and relatively new signal processing-based FDD approaches, with a special consideration paid to artificial intelligence-based FDD methods. Typical steps involved in the design and development of automatic FDD system, including system knowledge representation, data-acquisition and signal processing, fault classification, and maintenance related decision actions, are systematically presented to outline the present status of FDD. Future research trends, challenges and prospective solutions are also highlighted.

     

十六烷基三甲基季铵阳离子改良二氧化硅对酸性染料的吸着

The sorption behavior of acid dyes onto cetyltrimethylammonium bromide (CTAB)-modified silica as a function of pH in the aqueous medium was studied. Single-and multi-solute sorption equilibria of orange Ⅱ（OR), phenol red (PR) and Eriochrome Black T (EBT) were studied at pH 3, unbuffered water pH and pH 11. Sorption behavior of EBT could not be conducted at pH3 due to its aggregation in acidic medium. All the reaction conditions, experimental protocols and techniques remained the same throughout the sorption process. Sorption isotherms for single-solute system were fitted by the Langmuir model, while Langmuir competitive model (LCM) and the ideal adsorbed solution theory (IAST) coupled with Langmuir model (IAST/Langmuir) were used for the prediction of multisolute competitive sorption. Sorption affinities influenced by the factors like physical interactive forces between the molecules of CTA on silica and sorbate, structural limitations of the dyes based on their geometrical arrangement were investigated. Sorption affinity of OR was found to be higher than that of EBT and PR at all the pH values investigated. Magnitude of the sorption capacities was observed to be higher in acidic medium but lower in alkaline medium. Trends of the sorption affinities in multisolute system were simlar to those in single-solute system but magnitude of the sorption capacities was significantly reduced due to the prevailing competition among the sorbates.     

The correlations between structural and optical properties of magnetite nanoparticles synthesised from natural iron sand

The correlations between structural and optical properties of magnetite (Fe₃O₄) nanoparticles were analyzed by using X-Ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) Spectroscopy. The magnetite was synthesised from the iron sand using NaOH, HCl, and NaCl as a solvent. From the quantitative analysis of XRD spectra, the crystallite size (D), strain ($\epsilon$), stress ($\sigma$), energy deformation (u), porosity, and specific surface area were determined. The Kramers Kronig (K–K) relations was applied to the FTIR spectra to determine the optical properties: refractive index (n), extinction coefficient (k), the complex dielectric function ($\mathit{\epsilon }$), and the energy loss function (Im(-1/ε)). The uniform strain was produced from the NaOH and HCl as the solvent. The magnetite had higher porosity with NaCl as a solvent and was directly proportional to the optical phonon vibration. We found a perfect correlation; when the difference between two optical phonon increases, the crystallite size decreases, and the strain will be uniform.     

Characterisation and catalytic properties of MCM-41 and Pd/MCM-41 materials

Pure silica MCM-41 mesoporous molecular sieve material was synthesised and characterised by in situ synchrotron XRD, TEM, TGA/DTA and DRIFTS techniques. In situ energy dispersive XRD (EDXRD) confirmed the exact nature of the pore diameter of MCM-41 and the change in crystal structure on calcination. The IR band at 1057 cm^-1 of as-synthesised MCM-41 was shifted by 14 cm^-1 on heating to 673 K due to increased condensation of silanol groups to form Si-O-Si bridges. Calcined MCM-41 materials were used to support Pd, and the catalytic activities for 1-hexene and benzene selective hydrogenation were investigated. The Pd/MCM-41 catalyst showed high activity in hydrogenation of 1-hexene at an inlet reaction temperature of 298 K, but did not show any activity in hydrogenation for benzene. TEM results for the reduced Pd/MCM-41 catalysts revealed that the average Pd particle size was around 2-2.5 nm and these particles were located in the pores of MCM-41 and showed good distribution. TPR measurements showed that about 70% of palladium oxide (PdO) loading in the calcined catalysts was reduced at sub-ambient temperature. This revised version was published online in July 2006 with corrections to the Cover Date.     

Earthquake onset detection using spectro-ratio on multi-threshold time–frequency sub-band

Automatic onset detection and picking algorithm has been proposed by applying the spectro-ratio on time–frequency sub-band. The proposed algorithm does not need any parameter settings as it will work on data generated by either short or very broad band seismometers. Our algorithm is applied on local events from Cairo region recorded by three stations of the Egyptian National Seismic Network (ENSN). Maximum standard deviation is observed to be 0.113 s of the corresponding manual picks made by analysts.     

A tool for multiobjective evolutionary algorithms

This paper introduces a software tool based on illustrative applications for the development, analysis and application of multiobjective evolutionary algorithms. The multiobjective evolutionary algorithms tool (MOEAT) written in C# using a variety of multiobjective evolutionary algorithms (MOEAs) offers a powerful environment for various kinds of optimization tasks. It has many useful features such as visualizing of the progress and the results of optimization in a dynamic or static mode, and decision variable settings. The performance measurements of well-known multiobjective evolutionary algorithms in MOEAT are done using benchmark problems. In addition, two case studies from engineering domain are presented.     

Inverse random under sampling for class imbalance problem and its application to multi-label classification

In this paper, a novel inverse random under sampling (IRUS) method is proposed for the class imbalance problem. The main idea is to severely under sample the majority class thus creating a large number of distinct training sets. For each training set we then find a decision boundary which separates the minority class from the majority class. By combining the multiple designs through fusion, we construct a composite boundary between the majority class and the minority class. The proposed methodology is applied on 22 UCI data sets and experimental results indicate a significant increase in performance when compared with many existing class-imbalance learning methods. We also present promising results for multi-label classification, a challenging research problem in many modern applications such as music, text and image categorization.     

Neural basis for the genesis and control of digitalis arrhythmias

The author discussed the increase in the frequency of traumatic paralyses of the ocular muscles, and reported 6 cases of inferior oblique muscle paresis caused by local blunt or sharp traumas (haematoma, contusion, rupture, incarceration) and one case of traumatic Brownian pseudo-paralysis. The localisation of the injuries in 3 cases was on the inferior temporal part and in the other 3 cases on the superior part of the bulbar conjunctiva. Atypical horizontal deviation and characteristic vertical deviation, torsion and torticollis were observed in the majority of cases. One patient recovered spontaneously. 3 patients became asymptomatic after correction by prisms and one after recession of contralateral superior rectus muscle. The symptoms remained unchanged in the case of a "blow out" fracture (in spite of operation) and a Brown's syndrome (without treatment).