Analysis of phosphorus removal and anaerobic selector performance in a full-scale activated sludge process in Singapore.

This paper analyses the performance of the anaerobic selector (A/O process) in a full-scale activated sludge process receiving mostly industrial sewage discharge (> 60%) in Singapore. In addition to the sludge settleability, enhanced biological phosphorus removal (EBPR) was studied. The sludge volume index (SVI) reduced from 200 to 80 ml g(-1) and foaming was suppressed significantly, indicating the effectiveness of the anaerobic selector in improving sludge settleability. The phosphorus removal efficiency was 66%, and 7.5 mg HAc-COD was consumed per mg PO4(3-) -P removed. In the anaerobic compartment, 31% of the SCOD and 73% of the acetic acid in the settled sewage were removed with PO4(3-) -P release of 14.1 mg PO4(3-)-P l(-1). The linear correlation between PO4(3-) -P release in the anaerobic compartment and PO4(3-) -P uptake in the aerobic compartment indicates that there is about 0.8 mg PO4(3-) -P release in the anaerobic compartment per mg PO34(3-) -P uptake in the aerobic compartment. The fates of volatile fatty acids (VFAs) and its short chain acids (SCAs) in the process were studied and discussed.     

Reliability investigation of 0.07-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel

The authors have investigated the reliability performance of G-band (183 GHz) monolithic microwave integrated circuit (MMIC) amplifiers fabricated using 0.07-/spl mu/m T-gate InGaAs-InAlAs-InP HEMTs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel on 3-in wafers. Life test was performed at two temperatures (T/sub 1/ = 200 /spl deg/C and T/sub 2/ = 215 /spl deg/C), and the amplifiers were stressed at V/sub ds/ of 1 V and I/sub ds/ of 250 mA/mm in a N/sub 2/ ambient. The activation energy is as high as 1.7 eV, achieving a projected median-time-to-failure (MTTF) /spl ap/ 2 /spl times/ 10/sup 6/ h at a junction temperature of 125 /spl deg/C. MTTF was determined by 2-temperature constant current stress using /spl Delta/G/sub mp/ = -20% as the failure criteria. The difference of reliability performance between 0.07-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel and 0.1-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with In/sub 0.6/Ga/sub 0.4/As channel is also discussed. The achieved high-reliability result demonstrates a robust 0.07-/spl mu/m pseudomorphic InGaAs-InAlAs-InP HEMT MMICs production technology for G-band applications.     

Effect of Thickness of the p-AlGaN Electron Blocking Layer on the Improvement of ESD Characteristics in GaN-Based LEDs

The following letter presents a study regarding GaN-based light-emitting diodes (LEDs) with p-type AlGaN electron blocking layers (EBLs) of different thicknesses. The study revealed that the LEDs could endure higher electrostatic discharge (ESD) levels as the thickness of the AlGaN EBL increased. The observed improvement in the ESD endurance ability could be attributed to the fact that the thickened p-AlGaN EBL may partly fill the dislocation-related pits that occur on the surface of the InGaN-GaN multiple-quantum well (MQW) and that are due to the strain and the low-temperature-growth process. If these dislocation-related pits are not partly suppressed, they will eventually result in numerous surface pits associated with threading dislocations that intersect the InGaN-GaN (MQW), thereby reducing the ESD endurance ability. The results of the experiment show that the ESD endurance voltages could increase from 1500 to 6000 V when the thickness of the p-AlGaN EBL in the GaN LEDs is increased from 32.5 to 130 nm, while the forward voltages and light output powers remained almost the same.     

Interleukin-2 enhancement of cytotoxicity by humanized monoclonal antibody M195 (anti-CD33) in myelogenous leukemia

The mass childhood immunization programme has traditionally been viewed as a safe and effective preventative measure by health promoters, primary health care professionals and governments. This consensus has meant that immunization has rarely been viewed as ethically problematic. A number of recent changes in the context of the delivery of health care, particularly the emphasis on consumerism and the effect of the marketization of services, makes timely an examination of ethical, social and political issues. This article examines four main grounds for problematizing the mass childhood immunization programme. These are: clinical research evidence about the safety and efficacy of vaccines; the masking of wider social and political determinants of ill health; the contradictory strictures about collective and individual rights in relation to immunization; and the uniqueness of childhood immunization as a physical intrusion into a healthy body. The implications of these ethical issues are discussed in relation to informed consent and the need for a 'greenfield' review that includes the views of dissenting parents, lawyers and moral philosophers, as well as health professionals.     

ETR Ⅱ-30调速器液压控制系统

ETRⅠ-30调速器是瑞士爱舍维斯工厂生产的具有PID调节规律的电液调速器。本文对其液压控制系统作了较详细的介绍,供有关人员参考。     

Application of evolutionary programming to transient andsubtransient parameter estimation

This paper presents an artificial intelligence approach of using evolutionary programming to estimate the transient and subtransient parameters of a generator under normal operation. The estimation using evolutionary programming is compared with that using a corrected extended Kalman filter. The comparisons with both simulation and micromachine test results show that evolutionary programming is robust to search the real values of parameters even when the data are highly contaminated by noise, while with the extended Kalman filter, the estimation tends to diverge with such data     

Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.     

Tramadol, M1 metabolite and enantiomer affinities for cloned human opioid receptors expressed in transfected HN9.10 neuroblastoma cells

Tramadol hydrochloride is a centrally acting synthetic analgesic in widespread clinical use. Despite different degrees of opioid-like characteristics in preclinical tests, it is characterized by lack of full naloxone reversibility or naloxone-precipitated withdrawal in humans. To investigate this apparent discrepancy, the present study measured the affinity of tramadol (and its enantiomers) and an active O-desmethyl metabolite (M1) (and its enantiomers) to cloned human opioid receptors of the mu, delta and kappa type stably expressed in HN9.10 neuroblastoma cells. At mu sites, the Ki values for tramadol, its (+) and (-) enantiomers, M1, and its (+) and (-) enantiomers were 17000, 15700, 28800, 3190, 153 and 9680 nM, respectively, compared to 7.1 nM for morphine. These results are consistent with the suggestion of a non-opioid contribution to the clinical profile of tramadol.     

Detection of human papillomavirus in routinely processed biopsy specimens from laryngeal papillomas: evaluation of reproducibility of polymerase chain reaction and DNA in situ hybridization procedures

The frequency of human papillomavirus (HPV) in laryngeal papillomas varies largely among different studies. DNA in situ hybridization (ISH) has been the most widely used method for detection of HPV. The aim of this study was to compare the reproducibility and sensitivity of ISH with polymerase chain reaction (PCR) in 35 specimens of laryngeal papillomas routinely fixed in buffered or unbuffered formalin. Out of 12 specimens fixed in buffered formalin, 10 were positive for HPV 6/11 using ISH. The procedure was repeated three times and three specimens were positive only twice. Nine biopsies were positive for HPV using PCR with consensus primers (My 09/11) on dewaxed tissue without extracting DNA. In three repeated PCRs, the results were inconsistent in three samples. After DNA extraction, all 12 samples were positive with PCR. Of the 23 specimens fixed in unbuffered formalin, 14 were HPV-positive with ISH, while only one was positive with PCR. We concluded that PCR with My 09/11 consensus primers is a highly sensitive method for detection of HPV in laryngeal papillomas fixed in buffered formalin, but useless for samples fixed in unbuffered formalin. When DNA was extracted from the former type of fixed tissue, the results were highly reproducible. In contrast to PCR, ISH appeared to be less influenced by fixation procedure, but it was not as reproducible and sensitive as PCR. Negative results did not necessarily mean absence of HPV.     

Familial jejunal atresia with renal dysplasia

Although jejunal atresia occasionally may occur with a familial pattern, an association with renal disease has not been described. The authors report on three family members treated over two generations, all of whom had both proximal jejunal atresia and renal dysplasia. This association was most likely inherited as an autosomal dominant trait.