镁掺杂磷铝分子筛可见光光催化性能的初步研究

采用水热反应的方法合成了金属镁掺杂的磷铝分子筛MgAPO-5,通过XRD、DR UV-Vis、FT-IR等手段对其结构性能进行表征,并以亚甲基蓝溶液为目标降解物,在可见光下考察了MgAPO-5的光催化性能.结果表明,MgAPO-5具有与AlPO4-5相同的分子筛结构,掺杂的镁可能存在于磷铝分子筛的骨架中,在可见光下对亚甲基蓝溶液具有优良的光催化性能,反应5 h,脱色率可达92.5%.     

差分跳频通信系统的特点及性能

文章介绍了一种新型的短波跳频通信技术——差分跳频,分析了差分跳频技术区别于常规跳频技术的主要特点。针对按序列检测的信号接收方法,对差分跳频通信系统在AWGN信道下的性能进行了理论分析,同时做出相应的计算机仿真,证实了差分跳频通信技术和按序列检测方法的结合,使通信系统在AWGN信道下的性能得到了比较显著的提升。     

介孔分子筛SBA-15表面的胺基功能化

采用γ-胺丙基三甲氧基硅烷与表面硅羟基的反应,对介孔分子筛SBA-15进行了有机胺功能化,并对其进行了表征.XRD、SEM、比表面积测定、元素分析、TG和FT-IR的测定结果均表明,SBA-15表面成功地接枝上了有机胺功能基团,而六方结构特征基本保持.     

制备条件对硅基介孔分子筛孔结构的影响

采用溶剂热法制备了硅基介孔分子筛材料,较系统地考察了晶化温度、晶化时间及焙烧温度等因素对其结构的影响,并利用N2吸附手段进行了表征.结果表明,晶化温度和晶化时间能明显影响硅基介孔材料的结构,而过高的焙烧温度易导致介孔结构的塌陷.     

干气密封在气分机泵上的应用

干气密封是一种低泄漏、低磨损和长寿命的新型非接触型机械密封,正在逐步取代浮环密封和其他机械密封。简述了干气密封的结构、机理以及在气分-聚丙烯装置机泵上应用的技术关键。     

相关条件下基于N-P准则的分布式检测理论研究

本文针对并行网络、二元局部判决的情况,研究了在相关条件下基于N-P准则的分布式检测融合算法,给出了在联合概率密度已知和未知两种情况下的最优融合规则的理论推导及相应的解决方案,并在实验仿真的基础上,得到了部分有益的结论。     

Applications and Technologies of All-Solid State Blue Laser

1 Introduction Along with the matureness of laser diode (LD) manufacturing technology, the performance of LD has been improved greatly since 1980s, so various kinds of laser devices based on LD have been developed rapidly, especially the all-solid state lasers. After early experiments and researches, the all-solid state lasers have been commercialized successfully.     

Breaking a remote user authentication scheme for multi-server architecture

Lin et al., (2003) proposed a remote user authentication scheme for multi-server architecture. In this paper, we breaks this scheme by giving an attack. Our attack allows an adversary to impersonate any user in the system, as long as a single authentication message of that user is observed.     

用DSP实现多目标实时跟踪

介绍了在 TMS3 2 0 C62 0 3上实现 4个目标的快速跟踪技术。为了提高实时性和精确度 ,采用线性汇编优化实现。1个 3 2 0× 160主窗口的 DSP平均处理时间为 2 m s,3个 60× 60副窗口的 DSP平均处理时间各为 0 .4ms,实现了复杂背景下低对比度目标的快速跟踪。实验结果证明跟踪效果良好 ,解决了以前窗口开不大、跟踪速度慢的问题     

TEM Studies of High Temperature Corrosion Behaviour of TiAl Intermetallics with Surface Modifications

The oxidation/sulphidation behaviour of a Ti‐46.7Al‐1.9W‐0.5Si alloy with a TiAl₃ diffusion coating was studied in an environment of H₂/H₂S/H₂O at 850^oC. The kinetic results demonstrate that the TiAl₃ coating significantly increased the high temperature corrosion resistance of Ti‐46.7Al‐1.9W‐0.5Si. The SEM, EDX, XRD and TEM analysis reveals that the formation of an Al₂O₃ scale on the surface of the TiAl₃‐coated sample was responsible for the enhancement of the corroison resistance. The Ti‐46.7Al‐1.9W‐0.5Si alloy was also modified by Nb ion implantation. The Nb ion implanted and as received sampels were subjected to cyclic oxidation in an open air at 800^oC. The Nb ion implantation not only increased the oxidation resistance but also substantially improved the adhesion of scale to the substrate.