Stabilization of inter-area and/or oscillatory modes in large-scale power system by voltage impedance power system (VIPS) apparatus based on decentralized control scheme

New technologies such as power electronics have made it possible to change continuously the impedance of a power system not only to control power flow but also to enhance stability. A power system incorporating a variable impedance apparatus such as a variable series capacitor (VSrC) and high-speed phase shifter (HSPS) is called VIPS (Variable Impedance Power System) by the authors. This paper proposes a novel control method of VIPS apparatus such as VSrC and HSPS installed at an interconnecting point for stabilizing inter-area unstable and/or oscillatory modes. The proposed design method of the control system is a kind of hierarchical decentralized control method of a large-scale power system based on a Lyapunov function. Under the proposed control scheme, each subsystem can be stabilized independently by local controllers such as AVR, speed governor and PSS, and then the whole interconnected system can be stabilized by VIPS apparatus taking into account interactions between subsystems. The effectiveness and robustness of the VIPS apparatus control are shown by numerical examples with model systems including a large-scale power system.     

Steady-state torque control system with secondary-current feedback for three-phase squirrel-cage induction motors

This paper presents a highly stable steady-state torque control system with a feedback of a secondary current signal. The torque control system is constructed with a feedback of the secondary current (I₂) signal using a quick response magnetic-field sensor constructed with an amorphous core multivibrator bridge, which can solve the secondary resistance change problem for temperature variation in the IM. Moreover, we added a state feedback to the system to improve the response speed for the unit step function of a torque order. The I₂ sensor method has advantages especially at a low-speed range, in which conventional method using an integrator shows control errors.     

具有数据包丢失的离散随机不确定系统的线性最优满阶估值器

研究了具有数据包丢失和随机不确定性离散随机线性系统的状态估计问题.其中数据包丢失是随机的,且满足Bernoulli分布,系统矩阵中的随机不确定性由一个白色乘性噪声来描述.首先,通过配方方法,提出了最小均方意义下的无偏最优线性递推满阶滤波器.所提出的滤波器用到了当前时刻和最近时刻接收到的观测来保证线性最优性.与多项式滤波和增广滤波器相比,本文的滤波器具有较小的计算负担.然后,基于所获得的线性滤波器推导了线性最优预报器和平滑器.进一步研究了线性最优估值器的渐近稳定性,给出了稳态特性存在的一个充分条件.最后,通过两个仿真例子验证了所提估计算法的优越性.     

化工过程稳态模拟技术的现状和发展趋势

本文介绍了化工过程稳态模拟技术及其数学方法、计算环境和软件开发的现状和发展趋势。     

带有止步的成批到达的M~x/M/1/N多重工作休假排队系统

研究了带有止步的M~x/M/1/N多重工作休假排队系统。顾客成批到达,到达后每批中的顾客,或者以概率决定进入队列等待服务,或者以概率1止步。系统中一旦没有顾客,服务员立即进入多重工作休假。利用马尔科夫过程理论和矩阵解法求出了稳态概率的矩阵解,并得到了系统的平均队长、平均等待队长以及顾客的平均止步率等性能指标。     

Reaction of sodium perborate with a chlorinated cyclic hindered amine (TMP-Cl): I. Quantitative evaluation of active oxygen species in fabric bleaching

The reaction of N-chloro-4-hydroxy-2,2,6,6-tetramethylpiperidine (TMP-Cl) with sodium perborate (PB) was investigated with special reference to the generation of singlet oxygen and the possible application to a new oxidative bleaching process. Generation of the singlet oxygen (¹O₂), the hydroxyl radical (HO·) and superoxide anion radical (O₂·⁻) in the PB/TMP-Cl mixed solution was confirmed by the trapping reagent method. From the results of another experiment, in which the bleaching abilities of each active oxygen species were confirmed, the main active oxygen species contributing to the bleaching of purpurogallin, the skeleton of black tea pigment, in the PB/TMP-Cl system was concluded to be¹O₂.     

考虑非支持性评论的网络谣言传播模型

针对现有谣言传播模型尚未分析非支持性评论对网络谣言传播的影响,提出一个引入带有非支持性评论的谣言传播者的SII_CR₁R₂（Susceptible-Infected-Infected with non-supportive comment-Removed1-Removed2）网络谣言传播模型。首先,对模型进行稳态分析,以证明无谣言平衡点和谣言传播平衡点的稳定性;其次,通过数值仿真验证理论成果,并分析非支持性评论率、恢复率、传播率和非支持性评论的说服力对网络谣言传播的影响。分析结果表明：提高非支持性评论率对网络谣言传播具有抑制效果,但是该效果受到恢复率的影响,而增强非支持性评论的说服力和降低传播率均能有效降低网络谣言的影响范围。基于WS（Watts-Strogatz）小世界网络和BA（Barabási-Albert）无标度网络进行模型仿真,仿真结果证实了非支持性评论能够抑制网络谣言传播;最后,根据分析结果提出相应的谣言防控策略。     

高频供电条件下的PCB定子盘式永磁电机绕组优化设计

PCB定子盘式永磁无铁心电机的定子采用印制电路板(printed circuit board,PCB)结构,其电机的损耗主要来源于绕组上的交流附加铜耗和直流铜耗,因此定子绕组的设计直接影响电机整体性能。针对应用在较高频率且工况稳定的PCB电机,该文提出一种新型分布式绕组。首先建立反电势、直流铜耗、交流附加铜耗和电阻的解析表达式,分析PCB电机的空载特性。其次,以提高电机的效率为目的,提出在绕组有效导体部分加入绝缘材料。对新型绕组进行优化找到最合适的导体线宽,然后根据有限元理论对比分析新型分布式绕组和已有绕组负载特性。结果表明新型绕组不仅可以降低总铜耗,提高电机效率,有效降低定子稳定温升,并且新型结构也不会影响电机输出性能。最后制作一台16极600W样机进行验证,对PCB定子盘式永磁电机设计具有一定的参考价值。     

基于时频域交替法的迟滞非线性振动系统的稳态响应分析

连接界面的黏滑、摩擦行为不仅是引起结构刚度和阻尼非线性的主要原因,而且是结构无源阻尼的主要来源.Iwan模型能够较好地复现连接界面的黏滑、摩擦行为.本文采用时频域交替法(Alternating Frequency/Time Domain Method,AFT)研究含Iwan非线性模型的单自由度振子系统的稳态响应.时频域交替法具有频域法求解线性系统响应的高效性和时域法判断非线性力的便捷性特点,采用离散傅里叶变换和傅里叶逆变换,在频域和时域内分别求解系统响应和对应的非线性恢复力,再反复迭代计算系统的稳态响应.将时频域交替法计算结果和中心差分法计算的结果进行对比,并研究激励幅值对系统非线性特征的影响.结果表明,时频域交替法计算的结果与中心差分计算的结果具有较好的一致性,且求解效率较高,计算耗时减少50%;随着激励幅值的增加,系统的能量耗散增加,刚度降低,固有频率降低.     

煤矿高压电网小电流接地选线技术的比较与研究

文章分析了在理论研究和实践应用中都较为成熟的煤矿高压电网小电流接地选线方法的优缺点,并根据选线准确性、无误动作、对故障类型的广泛适应性及能够适用于中性点不接地或经消弧线圈接地的方式等要求,提出了一种结合稳态和暂态选线方法、优势互补的综合选线法,并给出了该方法的原理框图。