Nucleation of copper on an assembly of carbon microelectrodes

The initial stage of copper electrodeposition on the electrochemically activated assembly of carbon microelectrodes from an acid solution of copper sulfate was investigated using cyclic voltammetry, potentiostatic pulse technique and electrochemical impedance spectroscopy. Analysis of the experimental current transients has been carried out using a non-linear fitting procedure according to the model that takes into account spherical diffusion towards a disc-shaped microelectrode. The higher values of diffusion coefficient in comparison with those observed on planar electrodes were explained with an increased diffusion caused by the electrode geometry. Impedance spectra showed two time constants, the high-frequency related to the charge transfer process and the low-frequency corresponded to the deposit morphology.     

Neutron Stress Measurement of W‐Fiber Reinforced Cu Composite

Stress measurement methods using neutron and X‐ray diffraction were examined by comparing the surface stresses with internal stresses in the continuous tungsten‐fiber reinforced copper‐matrix composite. Surface stresses were measured by X‐ray stress measurement with the sin²ψ method. Furthermore, the sin²ψ method and the most common triaxal measurement method using Hooke's equation were employed for internal stress measurement by neutron diffraction. On the other hand, microstress distributions developed by the difference in the thermal expansion coefficients between these two phases were calculated by FEM. The weighted average strains and stresses were compared with the experimental results. The FEM results agreed with the experimental results qualitatively and confirmed the importance of the triaxial stress analysis in the neutron stress measurement.     

国外复合材料用高级增强纤维的发展现状

本文综述了国外碳纤维、陶瓷、聚芳酰胺、超高分子量聚乙烯、液晶聚合物纤维的发展现状,包括它们的生产能力、消费情况、性能特点,主要生产国和生产公司、产品牌号以及应用领域等,并指出了其生产进展和发展动向。     

A scheduling decision aid in glass fiber manufacturing

A decision aid for scheduling production in glass fiber manufacturing industry is described. The methodology combines a linear programming (LP) optimization model with a heuristic model. The LP model determines production goals; the heuristic model then uses the LP output to incorporate system-specific constraints in developing processing sequences.     

中国化学纤维工业现状及产业用纺织品的发展

概述了中国化学纤维工业的现状和今后的发展方向.着重介绍了中国产业用纺织品的原料、产品开发方向及其主要类别的应用情况.     

基于光纤环网的隧道火灾监控系统研究

文章对基于光纤环网的隧道群火灾报警系统进行研究,分析了其优缺点,提出了解决办法,并完成改造,应用于实际.     

Interface Characteristics and Laboratory Constructability Tests of Novel Fiber-Reinforced Polymer/Concrete Piles

Conventional pile materials such as steel, concrete, and timber are prone to deterioration for many reasons. Fiber-reinforced polymer (FRP) concrete composites represent an alternative construction material for deep foundations that can eliminate many of the performance disadvantages of traditional piling materials. However, FRP composites present several difficulties related to constructability, and the lack of design tools for their implementation as a foundation element. This paper describes the results of an experimental study on frictional FRP/dense sand interface characteristics and the constructability of FRP–concrete composite piles. An innovative toe driving technique is developed to install the empty FRP shells in the soil and self-consolidating concrete is subsequently cast in them. The experimental program involves interface shear tests on small FRP samples and uplift load tests on large-scale model piles. Two different FRP pile materials with different roughness and a reference steel pile are examined. Static uplift load tests are conducted on different piles installed in soil samples subjected to different confining pressures in the pressure chamber. The results showed that the interface friction for FRP materials compared favorably with conventional steel material. It was shown that toe driving is suitable for installation of FRP piles in dense soils.     

A review of modeling approaches for oriented semi-crystalline polymers

Modeling changes in the physical properties of oriented semi-crystalline polymer films is beneficial for understanding the fundamentals associated with structure property relationships and could be used for developing new polymer films with significantly enhanced physical properties. Relating the molecular changes observed in oriented polymer films to inherent polymer characteristics provides valuable insight for the development of new polymers which exhibit enhanced physical properties upon orientation. Modeling efforts will be reviewed that have attempted to use fiber composite theory to explain the transitions seen during the orientation process.     

Environmental Fatigue and Static Behavior of RC Beams Strengthened with Carbon-Fiber-Reinforced Polymer

Many countries around the world have tremendous needs to repair and strengthen their transportation infrastructure. Almost everywhere, traffic loads have reached levels largely exceeding design expectations. Northern countries also experience severe winter conditions that are combined with an extensive use of deicing salts and accelerate structural deterioration. In Canada, the extent of deterioration has prompted many authorities, including the federal and provincial governments, to investigate the potential use of fiber-reinforced polymer products to extend the life of their existing structures. However, it is widely recognized that the large-scale implementation of these products is often impaired by the lack of data on their durability. This paper presents an experimental project undertaken in order to assess the durability of reinforced concrete beams externally strengthened with two types of carbon-fiber-reinforced polymer (CFRP). The beams were first exposed to either wet-dry cycles or continuous immersion in water and then were loaded in fatigue. Finally, they were tested quasi-statically under four-point bending up to failure. The test results presented here provide some insights on the potential long-term performance of CFRP-strengthened beams exposed to severe environmental conditions.