Characteristic tryptic peptides and gelling properties of porcine skin gelatin affected by thermal action

Thermal action in extraction process had effects on characteristic tryptic peptides identification and gelling properties of porcine gelatin. SDS-PAGE, HPLC-LTQ/Orbitrap high-resolution mass spectrometry, texture analyser and rheometer were used to evaluate collagen depolymerisation degree, characteristic tryptic peptides and gelling properties of gelatins prepared in various thermal actions. Results showed that with increasing temperature and time, depolymerisation degree enlarged, while gel strength, gelling and melting temperature decreased. Mass spectra showed that 47 and 49 common characteristic tryptic peptides were identified in gelatins extracted at 50 °C and 100 °C with various times, respectively. Moreover, 34 common characteristic tryptic peptides were identified in all gelatin samples. Further comparison between this work and our previous investigations yielded 20 common characteristic tryptic peptides, which stably exist in various thermal actions. These common characteristic tryptic peptides may be very helpful for the accurate authentication of porcine gelatin.     

Structural Aspects and Prediction of Calmodulin-Binding Proteins

Calmodulin (CaM) is an important intracellular protein that binds Ca²⁺ and functions as a critical second messenger involved in numerous biological activities through extensive interactions with proteins and peptides. CaM’s ability to adapt to binding targets with different structures is related to the flexible central helix separating the N- and C-terminal lobes, which allows for conformational changes between extended and collapsed forms of the protein. CaM-binding targets are most often identified using prediction algorithms that utilize sequence and structural data to predict regions of peptides and proteins that can interact with CaM. In this review, we provide an overview of different CaM-binding proteins, the motifs through which they interact with CaM, and shared properties that make them good binding partners for CaM. Additionally, we discuss the historical and current methods for predicting CaM binding, and the similarities and differences between these methods and their relative success at prediction. As new CaM-binding proteins are identified and classified, we will gain a broader understanding of the biological processes regulated through changes in Ca²⁺ concentration through interactions with CaM.     

Sequence-Dependent Nanofiber Structures of Phenylalanine and Isoleucine Tripeptides

The molecular design of short peptides to achieve a tailor-made functional architecture has attracted attention during the past decade but remains challenging as a result of insufficient understanding of the relationship between peptide sequence and assembled supramolecular structures. We report a hybrid-resolution model to computationally explore the sequence–structure relationship of self-assembly for tripeptides containing only phenylalanine and isoleucine. We found that all these tripeptides have a tendency to assemble into nanofibers composed of laterally associated filaments. Molecular arrangements within the assemblies are diverse and vary depending on the sequences. This structural diversity originates from (1) distinct conformations of peptide building blocks that lead to different surface geometries of the filaments and (2) unique sidechain arrangements at the filament interfaces for each sequence. Many conformations are available for tripeptides in solution, but only an extended β-strand and another resembling a right-handed turn are observed in assemblies. It was found that the sequence dependence of these conformations and the packing of resulting filaments are determined by multiple competing noncovalent forces, with hydrophobic interactions involving Phe being particularly important. The sequence pattern for each type of assembly conformation and packing has been identified. These results highlight the importance of the interplay between conformation, molecular packing, and sequences for determining detailed nanostructures of peptides and provide a detailed insight to support a more precise design of peptide-based nanomaterials.     

N_2S_2或N_3S型配体的合成、~(99)Tc~m标记及生物分布研究

以MAG3为基本分子骨架，根据构效关系，分别引入合适的天然氨基酸，设计合成了4种N2S2或N3S型小分子多肽新配体，并通过了IR，^1H NMR,^13C NMR,MS谱学鉴定和元素分析表征。采用葡庚糖酸钙（GH）交换法对4个配体进行了^99Tc^m标记，研究了配合物在小鼠体内的生物分布特征。结果表明，^99Tc^m-MVGG肾摄取较高，滞留时间较长，血清除快，且肾与其它组织的活度比值高，具备成为肾功能显像剂的条件；^99Tc^m-MPGG肾初始摄取较高，R（肾／血）活度比值高，但肾清除较快，R（肾／肝）活度比值较低；^99Tc^m-MVTC和^99Tc^m－MPTC心肌初始摄取均较高，但在心肌和血中的清除速度较快。     

DETERMINATION OF TOTAL NITROGEN IN BARLEY AND MALT BY COMBUSTION METHOD—COLLABORATIVE TRIAL

A combustion method, relying on the Dumas principle, for the determination of total nitrogen in barley and malt, has been collaboratively tested by the Analysis Committee of the European Brewery Convention. Repeatability, r₉₅, and reproducibility, R₉₅, values were 0.063 and 0.116% of dry matter, respectively, for samples with nitrogen contents in the range 1.23 to 1.86% N of dry matter. There was no significant difference between these values for barley and malt. The Analysis Committee approved the adoption of the combustion method for inclusion in Analytica EBC as an alternative method.     

新生牛肝活性肽的制备及其毒性检测

目的制备新生牛肝活性肽并评价其安全性。方法采用膜法分离制备新生牛肝活性肽。将3批制品于37～40℃,75%相对湿度条件下存放3个月,以多肽含量为指标观察其稳定性,并进行急性毒性试验、小鼠骨髓细胞微核试验、Ames试验、小鼠精子畸形试验和大鼠喂养试验。结果制备的3批新生牛肝活性肽存放3个月后,多肽含量无明显下降,质量稳定。小鼠和大鼠经口灌人大于20.0g/kg体重的新生牛肝活性肽,均无急性毒性。3种致突变试验均未显示出致突变性,大鼠喂养试验各项指标均未见明显毒性。结论新生牛肝活性肽未表现出明显毒性。     

Effect of Iron on the Color of Barley and Other Cereal Porridges

ABSTRACT: Iron added as ferrous sulfate at 500 mg*kg⁻¹ to rice, oats, whole grain wheat, or proanthocyanidin-free barley porridge caused significant changes in the Hunter "L", "a", and "b" values but the visual appearance of these porridges remained satisfactory. Porridge made with normal barley flour fortified with 500 mg*kg⁻¹ of iron developed an unappealing gray color with ferrous sulfate, ferrous fumarate, or electrolytic iron, 3 salts differing in solubility. At 100 and 250 mg*kg⁻¹ of iron, the discoloration of normal barley porridge was less pronounced, but still objectionable. When fortified with 50 mg*kg⁻¹ of iron, normal barley porridge had a slight color change but was not noticeably gray. Thus barley-containing foods can be fortified with a soluble iron compound at the level of iron used in enriched flour and similar cereal-grain foods for the general population without developing an unattractive color.     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

Purification and Characterization of an Endoprotease from Melon Fruit

An endoprotease was purified from melon fruit (Cucumis melo L.) by ammonium sulfate precipitation, gel filtration and ion-exchange chromatography using t-butyloxycarbonyl-Ala-Ala-Pro-Leu p-nitroanilide as a substrate. The molecular weight was estimated as 26,000 and isoelectric point pH 9.5. It preferentially hydrolyzed peptide bonds of the carboxyl terminal sides of Leu, Ala, His, Gin, and Am. Activity was strongly inhibited by diisopropyl phosphofluoridate, indicating the serine protease nature of the enzyme. The migration distance on electrophoresis, molecular weight and substrate specificity differed from cucumisin, a known protease from melon. This unusual protease may have potential for special food treatment applications.     

Biologically active secondary metabolites of barley. IV. Hordenine production by different barley lines

Forty-three lines of barley, including ancestral (wild), landraces, Middle Eastern lines, and modern cultivars, were grown under two different sets of environmental conditions. Hordenine production in barley roots was determined at the one-leaf stage by HPLC analysis and, in two lines only, over a period of 35 days. Forty-two of the 43 lines produced significant amounts of hordenine, although there was no variation among groups. Middle Eastern lines had the highest production with 327 µg/g on a dry weight basis. Production was, however, determined more by environmental conditions during growth than by genetic factors. Hordenine production was up to seven times higher in plants grown under lower light intensities.