用于电弧检测的电力专用SoC设计

针对传统的电弧电路故障检测结果不准确的问题,设计用于电弧检测的SoC系统,并且在55nm工艺下进行流片验证。采用包含两种结构的模数转换器的片上电压源,设计了锁相环以及复位电路,精度最高可达8.67 bit。验证结果表明,本设计可提高电弧检测的准确性。     

2020年电子电路技术热点

文章归纳了2020年电子电路产业一些技术热点,主要有5G电路板设计和基材,制造方面半加成法、3D打印、直接金属化孔电镀和垂直互连结构等技术,以及集成电路封装载板技术。     

彩色AC-PDP运动图像仿真系统的开发

开发了彩色AC-PDP运动图像仿真系统,通过利用本系统的运动图像仿真功能可以对现有的各种显示技术、与子场有关的各种因素进行仿真及比较,为人们开发提高彩色AC-PDP图像显示质量的新型技术及子场提供了理论上的依据;通过利用本系统的Gamma特性研究功能可以对彩色AC-PDP中视频信号的反Gamma特性进行研究,并对反Gamma相关编码进行子场逼近,为选择符合要求的子场编码提供了判据.     

交通诱导室外LED显示屏有关问题之浅见

本文探讨了智能交通系统中交通诱导室外LED显示屏的使用功能,对交通诱导室外LED显示屏在实际应用中的有关问题发表了认识和看法。     

大型连杆流线简易试验方法

介绍了一种大型连杆流线的简易试验方法及其评价原则。该方法可清晰显示流线，并适合任何尺寸和形状的锻造连杆的流线试验。     

Driver detection and recognition of lineside signals and signs at different approach speeds

A study was carried out using simulation to investigate driver responses to lineside signals and signs at various approach speeds. The objectives of the study were: (1) to find out whether train speed would significantly affect signal/sign reading; (2) to examine at which point certain types of signs or signals could be detected or recognised, and (3) to determine a speed cut-off level above which certain types of signs or signals are no longer recognisable or detectable. Fifty-seven train drivers from 12 Train Operating Companies in the UK participated in the trials. Twenty different types of lineside signs and ten types of signals were tested under six different approach speeds ranging from 100 to 350 km/h (62–218 mph). Driver performance measures were ‘time remaining to the signal/sign’ at the point of detection or recognition, and reading error rate. The results showed a significant influence of train speed on driver responses to lineside signals/signs and demonstrated a non-linear relationship between driver responses to signals/signs and approach speed. This has been used to estimate a maximum approach speed limit within which a specific signal or sign can be correctly detected or recognised. The findings and implications of the study are discussed in the paper.     

微机织机监测的巡检系统

本文介绍织机监测的数据采集系统即巡检系统,重点讨论了巡检方案的选择、巡检电路的设计、巡检软件的编制以及几种抗干扰的措施。     

对水轮机自动调速器油压控制电路的改进

YT－1000型油压自动调速器在运行中不能维持正常油压、在不增加任何设备的情况下，只改动二次接线的处理方法，就能消除隐患、解决问题。     

Display reflectance: Basics,measurement, and rating

Abstract— In this paper, methods and instruments for measurement and evaluation of reflection characteristics are reviewed as needed for research and development of electronic displays and for material and surface modeling with ray‐tracing and rendering software packages. Contrast under ambient illumination and recognizability under daylight illumination are prime development targets in the electronic‐display field, while computation and synthesis of realistic scenes and objects are pushing the need for physical data in computer graphics applications. Three categories of instruments are available for detailed reflection analysis. They are based on (1) gonioscopic (mechanical) and conoscopic (optical) directional scanning, (2) imaging approaches, and (3) on arrangements with variable source or receiver aperture. The capabilities, advantages, and limitations of these methods are introduced and discussed in order to facilitate appropriate selection of methods and instruments. For illustration purposes we present typical results obtained from commercial electronic display screens. A basis for continued widespread implementation and standardization of reflection metrology as required for objective rating and comparison of electronic‐display screen performance under ambient illumination is provided.     

A novel compact circuit for 4-PAM energy-efficient high speed interconnect data transmission and reception

Transmission of signals, whether on-chip or off-chip, places severe constraints on timing and extracts a large price in energy. New silicon device technologies, such as back-plane CMOS, provide a programmable and adaptable threshold voltage as an additional tool that can be used for low power design. We show that one particularly desirable use of this freedom is energy-efficient high-speed transmission across long interconnects using multi-valued encoding. Our multi-valued CMOS circuits take advantage of the threshold voltage control of the transistors, by using the signal-voltage-to-threshold-voltage span, in order to make area-efficient implementations of 4-PAM (pulse amplitude modulation) transceivers operating at high speed. In a comparison of a variety of published technologies, for signal transmission with interconnects of 10-15 mm length, we show up to 50% improvement in energy for on-chip signal transmission over binary encoding together with higher limits for operating speeds without a penalty in circuit noise margin.