Influences of chip serration on micro-topography of machined surface in high-speed cutting

Saw-tooth chip changes from macroscopically continuous ribbon to separated segments with the increase of cutting speed. The aim of this study is to find the correlations between chip morphology and machined surface micro-topography at different chip serration stages encountered in high speed cutting. High strength alloy steel AerMet100 was employed in orthogonal cutting experiments to obtain chips at different serration stages and corresponding machined surfaces. The chips and machined surfaces obtained were then examined with optical microscope (OM), scanning electron microscope (SEM), and white light interferometer (WLI). The result shows that chip serration causes micro-waves on machined surface, which increases machined surface roughness. However, wave amplitudes (surface roughness) at different serration stages are different. The principal factor influencing wave amplitude is the thickness of the sawed segment (tooth) of saw-tooth chip. With cutting parameters in this study, surface roughness contributed by chip serration ranges from 0.39 μm to 1.85 μm. This may bring on serious problems in the case of trying to replace grinding with high-speed cutting in rough machining. Some suggestions have been proposed to control the chip serration-caused surface roughness in high-speed cutting based on the results of the current study.     

一款紧凑增强型可变阻抗电磁带隙结构

基于传统AI-EBG结构,提出了一种小尺寸的增强型电磁带隙结构,实现了从0.5~9.4 GHz的宽频带-40 dB噪声抑制深度,且下截止频率减少到数百MHz,可有效抑制多层PCB板间地弹噪声。文中同时研究了EBG结构在高速电路应用时的信号完整性问题,使用差分信号方案可改善信号完整性。     

对国际岩石力学委员会J_V公式的质疑

通过对国际岩石力学委员会JV 公式的论证 ,指出了该公式不符合数理逻辑。结合工程勘察实践 ,拟建了Ky新公式 ,提高了工程岩体完整程度评价方法的科学性。     

Object-oriented DBMS requirements

The requirements on an object-oriented DBMS for management of information in a large, complex enterprise are presented. These requirements aid in the achievement of an environment characterized by data sharing, open architectures, application and data portability, and assurance of data integrity. They were defined from the point of view of a user of the DBMS; therefore they describe the expected functionality of the DBMS and do not specify the method of implementation to achieve this functionality. They encompass requirements on the data model, query and data manipulation languages, the system architecure, interfaces to the system, change management, and transaction management.     

Pheromone Disruption of Argentine Ant Trail Integrity

Disruption of Argentine ant trail following and reduced ability to forage (measured by bait location success) was achieved after presentation of an oversupply of trail pheromone, (Z)-9-hexadecenal. Experiments tested single pheromone point sources and dispersion of a formulation in small field plots. Ant walking behavior was recorded and digitized by using video tracking, before and after presentation of trail pheromone. Ants showed changes in three parameters within seconds of treatment: (1) Ants on trails normally showed a unimodal frequency distribution of walking track angles, but this pattern disappeared after presentation of the trail pheromone; (2) ants showed initial high trail integrity on a range of untreated substrates from painted walls to wooden or concrete floors, but this was significantly reduced following presentation of a point source of pheromone; (3) the number of ants in the pheromone-treated area increased over time, as recruitment apparently exceeded departures. To test trail disruption in small outdoor plots, the trail pheromone was formulated with carnuba wax-coated quartz laboratory sand (1 g quartz sand/0.2 g wax/1 mg pheromone). The pheromone formulation, with a half-life of 30 h, was applied by rotary spreader at four rates (0, 2.5, 7.5, and 25 mg pheromone/m²) to 1- and 4-m² plots in Volcanoes National Park, Hawaii. Ant counts at bait cards in treated plots were significantly reduced compared to controls on the day of treatment, and there was a significant reduction in ant foraging for 2 days. These results show that trail pheromone disruption of Argentine ants is possible, but a much more durable formulation is needed before nest-level impacts can be expected. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

信息化对制造业的影响综述

信息技术是一种新型技术。信息技术和制造业相互依存、相互促进是一种发展趋势。信息技术对制造业的影响主要有:信息化在制造业的产品开发设计技术方面带来的进步,这主要包括计算机辅助技术;信息化在制造业的生产管理技术方面带来的进步,主要包括企业制造资源计划系统及产品数据管理;信息化在制造业的制造方式上带来的进步,主要包括柔性制造、计算机集成制造等先进制造技术。     

Influences of land use/cover on water quality in the upper and middle reaches of River Njoro, Kenya

Data from 10 sampling sites along the River Njoro are used to examine the contribution of nutrients from upstream land uses draining each of the sampling sites. The data also are used to assess whether both the proportion of land uses and the size of the subwatersheds account for the variability in water quality in the River Njoro watershed. Geographical Information System analysis was used to determine the spatial distribution of land‐cover types and subwatersheds contributing run‐off to the sampling sites in the River Njoro. Standard Digital Elevation Model‐based routines were used to establish the watershed area contributing run‐off to each sampling site. Water and sediment samples were collected for chemical analysis, and the nutrient levels were related to the upstream land‐use types and the size of the subwatersheds. The mid‐stream portion of the River Njoro (near Egerton University) accounts for the highest nutrient contributions. The percentage contribution is magnified by additions from industrial, human settlements and agricultural land uses around the University. There is a significant decrease in nutrient levels downstream, however, indicating natural purification as the river flows through an area of large‐scale farming with intense, well‐preserved riparian and in‐stream vegetation. Steep slopes of the land upstream of Egerton University enhance erosion and nutrient losses from those subwatersheds. Mixed small‐scale agricultural and bare lands contribute over 55% of the phosphorus load to the upper and mid‐reaches of the River Njoro. The size of the subwatershed accounts for about 53% of the variability in the soluble phosphorus in the river. The land‐use subwatershed proportions are important for characterizing and modelling water quality in the River Njoro watershed. Upland land uses are as important as near‐stream land uses. We suggest that conservation of intact riparian corridor along the river and its tributaries contributes significantly to natural purification processes and recovery of the ecological integrity of the River Njoro ecosystem.     

Structural integrity in electronics

With continuing miniaturisation, increased performance demands and the requirement to remove lead from solder alloys, the challenges to structural integrity and reliability of electronic equipment are substantial and increasing. This paper outlines typical features in electronic equipment of which the structural integrity community may be generally unaware. Potential failure modes in service are described, and the problems of scale and material characteristics are considered. Progress in the application of fracture mechanics to the life prediction of interconnections is reviewed. The limited evidence available suggests that the crack growth resistance of silver‐containing lead‐free solders is superior to that of the traditional Sn‐37Pb under cycle‐controlled conditions but there is no difference when time‐dependent conditions prevail. In several respects, it is contended that the electronics sector is faced with challenges at least equivalent to those encountered in gas turbines and nuclear power generation.     

网络信息安全技术综述

阐述了网络信息安全的三个组成方面,具体分析了在实际应用中的网络安全技术手段,探讨了国内外研究开发网络信息安全技术的现状、发展趋势及我们所应着重采取的策略.     

Transient Green’s Tensor for a Layered Solid Half-Space With Different Interface Conditions

Pulsed ultrasonic techniques can be and have been used to examine the interface conditions of a bonded structure. To provide a theoretical basis for such testing techniques we model the structure as a layer on top of a half-space, both of different elastic properties, with various interface bonding conditions. The exact dynamic Green’s tensor for such a structure is explicitly derived from the three-dimensional equations of motion. The final solution is a series. Each term of the series corresponds to a successive arrival of a “generalized ray” and each is a definite line integral along a fixed path which can be easily computed numerically. Willis’ method is used in the derivation. A new scheme of automatic generation of the arrivals and ray paths using combinatorial analysis, along with the summation of the corresponding products of reflection coefficients is presented. A FORTRAN code is developed for computation of the Green’s tensor when both the source and the detector are located on the top surface. The Green’s tensor is then used to simulate displacements due to pulsed ultrasonic point sources of known time waveform. Results show that the interface bonding conditions have a great influence on the transient displacements. For example, when the interface bonding conditions vary, some of the first few head waves and regular reflected rays change polarities and amplitudes. This phenomenon can be used to infer the quality of the interface bond of materials in ultrasonic nondestructive evaluation. In addition the results are useful in the study of acoustic microscopy probes, coatings, and geo-exploration.