Reduction of primary tar vapor from biomass by hot char particles in fixed bed gasification

This study investigated the reduction of primary tar vapor from biomass pyrolysis over a bed of hot char particles, focusing on the effect of different operating conditions and char properties. The char samples were prepared from wood, paddy straw, palm kernel shell, and activated carbon. The primary tar was produced from fir wood by pyrolysis at 500 °C and passed through a reactor filled with char particles with different lengths and temperatures.The tar cracking reactions became active above 700 °C, and the presence of hot char particles promoted more tar reduction compared with thermal cracking alone. The mass yield of the primary tar was reduced from 24.8% by pyrolysis to 13.7% by thermal cracking at 800 °C, and further to 7.7% by hot char particles in a reactor volume of 1.48 cm³/g_wood. In terms of carbon yield, these values correspond to 32.1%, 19.9% and 11.8%, respectively. The tar with smaller molecular weights was quickly decomposed to gases, whereas the heavy tar was resistant to cracking, even when the reactor volume was increased to 6.90 cm³/g_wood. The tar cracking behaviors were similar for four char types despite differences in microscopic surface areas, pore-size distributions, and inorganic contents. The results suggest that creating a tar-cracking zone using char particles situated between the pyrolysis and gasification zones could be helpful in converting the primary tar vapor in a downdraft fixed-bed gasifier, but the degree of conversion is not high enough to eliminate tar issues completely.