共查询到20条相似文献,搜索用时 250 毫秒
1.
北京的街道和胡同有多少与商业、商品、饮食、服饰等五行八作有关,还从来没有人认真统计过。街道有灯市、花市、羊市、珠市、缸瓦市、菜市、骡马市、煤市、米市、西什库、海运仓、禄米仓等,胡同更多了,如果子市、果子巷、酒醋局、茶叶、干面、烧酒、官帽、卫衣、皮裤、胭脂、绒线、手帕、轿子、小市、钱市、铺陈、驴市、鹁鸽市、铸钟厂等; 相似文献
2.
3.
4.
《世界有色金属》2013,(11):51
河南省沁阳市沁龙化学防腐有限公司是从事研制生产多功能新型螺旋溜槽、摇床、旋流分级机、磁选机、淳选机、搅拌槽、打砂机、玻璃钢冷却塔、风机、管道、防腐贮罐等多种产品的专业公司,已有近三十年的生产历史,通过了ISO9001;2000质量体系认证,主导产品为多功能新型螺旋溜糟,擂床,是选别有色金属、黑色金属、非金属、贵重金属的理想选矿设备,如金矿、银矿、沙金矿、锡矿、钛铁矿、硫铁矿、赤铁矿、福铁矿、铬铁矿、钨矿、钽泥矿、煤矿、独居石、蓝宝石、重晶石、金红石、锆英石、硅砂等。现有8000多台设备在全国各地矿山使用,在鞍钢、马钢、首钢、包钢、唐钢、安钢、武钢、柳钢、邯钢等地应用于氧化赤铁矿选矿工业,在拳钢、成钢 相似文献
5.
6.
7.
《不锈(市场与信息)》2009,(24):1-2
国家拟出台进一步加强淘汰落后产能工作的通知,协调发改委、工信部、环保部、国土部、商务部、海关总署、财政部、央行、银监会、质检总局、安监总局、工商总局、电监会、能源局等,以严厉措施,重点完成电力、煤炭、钢铁、水泥、有色、焦炭、造纸、皮革、 相似文献
8.
9.
10.
11.
12.
实验重点探讨了高含量碳对除尘灰样品中镁、铝、钾、钙、铬、锰、铜、钡、铅、镉、锌等元素测定的影响,并解决了除碳的问题。样品使用马弗炉高温除碳,采用盐酸-硝酸-氢氟酸-高氯酸消解样品灰分,选择了镁、铝、钾、钙、铬、锰、铜、钡、铅、镉、锌等元素的分析谱线和扣背景模式,建立了使用电感耦合等离子体原子发射光谱法(ICP-AES)测定高碳除尘灰中镁、铝、钾、钙、铬、锰、铜、钡、铅、镉、锌等元素的方法。在仪器最佳工作条件下,各元素校准曲线线性相关系数r均大于0.999 5,方法检出限在1.08~26.01 mg/kg之间。方法应用于除尘灰实际样品中镁、铝、钾、钙、铬、锰、铜、钡、铅、镉、锌的测定,结果的相对标准偏差(RSD,n=11)为0.90%~7.1%,目标元素的加标回收率为90%~117%;按照实验方法测定除尘灰中镁、铝、钾、钙、锌,结果与火焰原子吸收光谱法(FAAS)的测定结果相吻合。 相似文献
13.
铍中铝、钴、铬、铜、铁、镁、锰、镍、铅、硅和锌等11种杂质元素含量的准确测定,是判定铍材是否合格的重要指标。目前,上述杂质元素的测定标准为GJB 2513A—2008《铍化学分析方法》,方法分别采用光度法和原子吸收光谱法对各元素逐一测定,测定周期很长。试验采用盐酸-硝酸溶解样品,选择Al 308.215nm、Co 230.786nm、Cr 284.325nm、Cu 324.754nm、Fe 261.187nm、Mg 285.213nm、Mn 260.569nm、Ni 221.647nm、Pb 182.205nm、Si 250.690nm、Zn 213.856nm为分析谱线,采用标准加入法(MSA)配制标准溶液系列消除基体效应的影响,使用电感耦合等离子体原子发射光谱法(ICP-AES)测定铝、钴、铬、铜、铁、镁、锰、镍、铅、硅和锌,从而建立了铍中11种元素的测定方法。各待测元素校准曲线的线性相关系数均大于0.9995;各元素的定量限为0.001%~0.002%。实验方法用于测定铍样中铝、钴、铬、铜、铁、镁、锰、镍、铅、硅和锌,结果的相对标准偏差(RSD,n=10)为0.63%~8.6%,回收率为90%~110%。按照实验方法测定铍样中上述11种元素,测定结果与采用GJB 2513A—2008测定的结果吻合。 相似文献
14.
实验结果表明,M17铸造高温合金(%:0.16C、8.79Cr、5.79A1、4.93Ti、3.29Mo、15.20Co、0.78V、0.015B、0.073Zr、0.002S、0.001P、0.001 1O、0.001 0N)经25 kg真空感应炉返回重熔后,Si含量随重熔次数的增加而略有增加,合金中主要元素和其它杂质元素S、P、H的含量变化不大,而氧、氮略有增加;合金中初生碳化物由新合金中的草书体逐渐向返回合金块状转变,初生碳化物的遗传性堵塞合金凝固时的补缩通道,使返回料合金的疏松倾向增大,高温塑性下降较大。 相似文献
15.
16.
《Baosteel Technical Research》2010,(Z1):109
Due to fast development of Chinese steel industry,continuous adjustment of product,improvement of quality,research of value-added product,RH technology is significantly developed.More and more steel plants are covered with RH facilities.RH ratio is growing rapidly as well.Over past decade,through assimilating advanced foreign technologies and further refining them,Chinese large scale steel plants master the technology of RH production,operation,maintenance and make it more widespread.RH functions are well applied and improved.RH is more widely effectively put into use.Through independent innovation,RH core devices and technology,such as RH vacuum pump,oxygen top lance,vacuum vessel preheating lance,ladle lifting device etc.have realized localization.The development of equipment design,software design,equipment manufacturing technology,equipment mounting,test technology and EPC management makes equipment configuration more flexible,equipment more functional and stable,easier to operate and maintain.It also guarantees highly effective and low energy consumption production and quality of steel,reaches international advanced level,lowers the cost of RH construction and operation,makes after-sake service more convenient. How to continuously optimize and develop RH process,equipment and control technology,in order to meet the needs of product with more reasonable and economic process,exploit potentialities,build more effective,lower cost,lower energy consumption,protecting environment RH facilities will be the key point of future RH technology development in China. 相似文献
17.
Compared to storm water runoff, urban roadway snow exposed to traffic and winter maintenance practices has a much greater capacity to accumulate and retrain heavy metals and other anthropogenic constituents. Heavy metals once released in the environment are not degraded and partition between the dissolved and particulate-bound fractions. Residence time, solid loadings, alkalinity, hardness, and pH influence partitioning. Accretion and partitioning of Pb, Cu, Cd, Zn, Al, Ca, Na, Mg, and Fe from a series of urban highway sites in Cincinnati, Ohio, are compared to temporal accretion trends at a control site removed from the highway environment. Results from partitioning analysis indicate that Pb, Cu, Cd, Zn, Al, Mg, and Fe were all highly particulate bound, while Na and Ca were mainly dissolved for all highway sites. Partition coefficients for most heavy metals in snowmelt ranged from 103 to 106?L/kg. Concentrations for Pb, Cu, Cd, Zn, and cyanide were orders of magnitude higher than at the control site and exceeded storm water runoff concentrations by one to two orders of magnitude. For residuals analyses, the specific surface area generally increased with decreasing particle size while the predominance of total surface area (SA) was associated with the medium to coarser size fractions. Heavy metal mass trends followed similar general trends to that of the SA. Characterization of accretion and partitioning of these metals is a necessary first step toward development of management and treatment strategies designed to address urban snow pollution. 相似文献
18.
A mathematical model has been presented for the mechanism of interfacial slip damping in layered and jointed cantilever beams with continuous and tack welds. The pressure distribution at the interfaces, number of contacting layers, techniques of welding, length and thickness of the beam specimen, and amplitude and frequency of vibration are found to be the dominating factors influencing the damping capacity of such welded structures. The results can be exploited positively in the design of machine tools, aircraft, spacecraft, satellites, automobiles, missile systems, etc. for maximizing their damping capacity. 相似文献
19.
Reports an error in "Meeting current challenges in higher education: The need for more psychologists" by A. W. Logue (Review of General Psychology, 2007[Dec], Vol 11[4], 381-391). On page 389, right column, last paragraph, the second to last sentence should read "The goal now, however, will be to improve students' success, faculty's scholarship, and the future of their communities". On page 386, right column, third paragraph, line six, "psychologist-administrators" should appear as "psychologist administrators". On page 390, right column, the Logue 2006 reference should read "[Survey of fields of Middle States Commission accredited New York State institutions of higher education chief academic officers and presidents]". (The following abstract of the original article appeared in record 2007-18727-007.) Higher education is currently facing many serious challenges. These challenges derive from the effects of globalization, massification (the wide availability of higher education), competition, expanding technology, regulation, litigation, and tuition increases that are outpacing student aid. Many psychologists possess the skills to overcome these challenges: to facilitate the learning, creativity, and performance of each student, faculty member, and staff member; foster productive group relations; analyze human behavior qualitatively, quantitatively, and experimentally; and generate and steward funds for their institutions. Psychologists are well prepared to lead institutions of higher education through and beyond their 21st-century challenges. Relatively few higher education leaders are psychologists, however. Psychologists should be encouraged to choose administrative career paths and thus greatly benefit our colleges and universities. (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献