水杨酸对氯苯酯的合成工艺研究

以水杨酸和对氯苯酚为原料合成光稳定剂水杨酸对氯苯酯,分别研究了反应温度、反应时间、原料配比等条件对合成反应的影响,确定了最佳工艺条件。该方法合成水杨酸对氯苯酯的最适宜的工艺条件是：反应温度100℃,反应时间4h,对氯苯酚与水杨酸的摩尔比为1：1．15,对氯苯酚与三氯化磷的摩尔比为1：0．5,水杨酸对氯苯酯的产品收率94．44％,产品纯度98．5％。     

杂多酸催化合成4-叔丁基-2-(α-甲基苄基)苯酚

以4-叔丁基苯酚和苯乙烯为原料,Keggin型杂多酸12-磷钨酸为催化剂,合成4-叔丁基-2-(α-甲基苄基)苯酚(t-BAMBP),考察了原料摩尔比、反应时间、反应温度以及催化剂用量对t-BAMBP收率的影响。结果表明,较优工艺条件为:n(苯乙烯)∶n(4-叔丁基苯酚)=1.3∶1,反应时间为90 min,反应温度为90℃,催化剂用量为1%[m(12-磷钨酸)∶m(4-叔丁基苯酚)],4-丁基苯酚转化率为95%,t-BAMBP收率为62.4%。     

水杨酸甲酯的加压合成工艺研究

以水杨酸和甲醇为原料,对甲苯磺酸催化作用下合成了水杨酸甲酯,考察了酸醇摩尔比、反应温度、反应时间及反应压力对酯收率的影响。结果表明,较佳合成工艺条件为:n(水杨酸)∶n(甲醇)摩尔比=1∶5,反应温度120℃,反应时间5 h,反应压力162 kPa,在此条件下,酯收率接近90.0%。产品经FT-IR确定结构,用气相色谱检测,产品纯度达到99.5%。     

纳米氧化铁催化合成对叔丁基苯酚的研究

以自制的纳米氧化铁为催化剂,用叔丁基氯和苯酚为原料合成了对叔丁基苯酚。探讨了催化剂烘培温度、催化剂用量、反应温度、反应时间、原料配比等因素对反应的影响。实验结果表明:350°C下焙烧3 h的纳米氧化铁对苯酚的叔丁基化反应具有很高的催化活性。在催化剂加入量为2g、n(叔丁基氯)∶n(苯酚)=1∶1.2、反应温度50°C、反应时间2 h的条件下,生成对叔丁基苯酚的收率可达76.3%。     

抗氧剂4,4'-乙撑二(2,6-二叔丁基苯酚)的合成研究

以甲醇钠为催化剂,采用2,6-二叔丁基苯酚、三聚乙醛为原料合成4,4’-乙撑二(2,6-二叔丁基苯酚),分别考察了反应温度、反应时间、原料配比、催化剂和溶剂用量等条件对缩合反应的影响。得到了合成4,4’-乙撑二(2,6-二叔丁基苯酚)最适宜的条件是:反应温度为125℃,反应时间8 h,n(2,6-二叔丁基苯酚)∶n(三聚乙醛)为0.2∶0.15;催化剂的用量为0.8 g、溶剂的用量为40 g(2,6-二叔丁基苯酚为0.2 mol的情况下)。4,4’-乙撑二(2,6-二叔丁基苯酚)的收率可达到91.75%以上,产品纯度w[4,4’-乙撑二(2,6-二叔丁基苯酚)]超过99.0%。     

硫酸氢钠催化合成水杨酸异辛酯

以水杨酸和2-乙基己醇为原料,硫酸氢钠为催化剂,合成了水杨酸异辛酯,并用UV,IR和GC-MS等对其进行了表征.采用正交试验考察了影响酯收率的因素,得到了较佳工艺条件:水杨酸0.05 mol,n(2-乙基己醇):n(水杨酸)=3:1,反应时间4 h,催化剂1.250 g,反应温度150℃,不加带水剂,酯化率可达83.5%,酯收率78.5%.     

2，6-二叔丁基对仲丁基酚的合成

以磺酸阳离子树脂为催化剂,以对仲丁基苯酚和异丁烯为原料合成了2,6-二叔丁基对仲丁基苯酚。探讨了不同催化剂、反应温度、反应时间、物料配比和催化剂用量对反应的影响。最优的反应条件:催化剂的质量分数为3%～5%(以对仲丁基苯酚质量计,下同),n(对仲丁基苯酚)∶n(异丁烯)=1∶2,反应温度90～100℃,反应压力0.15～0.2 MPa,反应时间4 h,在该条件下,产物选择性达95%以上,精馏分离得到色谱纯度大于97.5%的2,6-二叔丁基对仲丁基苯酚,总收率达95%以上。     

水杨酸-2-乙基己酯合成工艺研究

以水杨酸、2-乙基己醇为原料,对甲苯磺酸为催化剂,直接反应合成了水杨酸-2-乙基己酯,并用折光率、红外光谱对产物进行了表征.研究了水杨酸与2-乙基己醇物质的量比、催化剂用量、反应温度、反应时间对酯化率和产物收率的影响.得出的最优反应条件为:n(水杨酸)∶n(2-乙基己醇)为1:3,催化剂对甲苯磺酸的质量分数为水杨酸的10％,反应温度为130?140℃,反应时间为4h.在此条件下,酯化率为98.85％,水杨酸-2-乙基己酯的收率为94.32％,纯度可以达到99％以上.     

NPS-1负载磷钨酸催化合成4-叔丁基-2-(α-甲基苄基）苯酚

以介孔分子筛NPS-1负载12-磷钨酸杂多酸为催化剂,4-叔丁基苯酚和苯乙烯为原料,合成4-叔丁基-2-（α-甲基苄基）苯酚（t-BAMBP）。采用正交实验研究介孔材料NPS-1负载12-磷钨酸对t-BAMBP合成反应的催化活性,考察反应温度、反应时间、原料配比和催化剂用量对t-BAMBP收率的影响。优化的工艺条件为：反应温度70 ℃,反应时间30 min,n（苯乙烯）∶n(4-叔丁基苯酚)=1.3∶1,催化剂用量为4-叔丁基苯酚质量的0.2%,t-BAMBP收率70.3%。     

聚二(2-甲基-4-羟基-5-叔丁基苯)硫醚的合成

介绍了四步法合成聚二(2 甲基 4 羟基 5 叔丁基苯)硫醚:①以异丁烯和间甲酚为原料,以浓硫酸为催化剂合成3 甲基 6 叔丁基苯酚,并将剩余釜底液继续与间甲酚反应使3 甲基 6 叔丁基苯酚的收率接近100%;②硫磺与氯气反应合成二氯化硫,收率80%以上;③3 甲基 6 叔丁基苯酚与二氯化硫发生缩合反应生成二(2 甲基 4 羟基 5 叔丁基苯)硫醚,采用加入辅助溶剂法收率达到92%;④二(2 甲基 4 羟基 5 叔丁基苯)硫醚同氧气发生氧化偶联反应合成聚二(2 甲基 4 羟基 5 叔丁基苯)硫醚。氧化偶联反应的最佳条件:n〔二(2 甲基 4 羟基 5 叔丁基苯)硫醚〕/n(氧气)=2 5～3 0,n(氯化亚铜)∶n〔二(2 甲基 4 羟基 5 叔丁基苯)硫醚〕=1∶140,n(氯化亚铜)∶n(四甲基乙二胺)=1∶1 3的铜 胺络合物为催化剂,温度50℃,压力0 2MPa,反应时间2～3h,然后减压蒸出溶剂,最后得到淡黄色的聚二(2 甲基 4 羟基 5 叔丁基苯)硫醚,收率>99%。     

Many Drugs of Abuse May Be Acutely Transformed to Dopamine,Norepinephrine and Epinephrine In Vivo

It is well established that a wide range of drugs of abuse acutely boost the signaling of the sympathetic nervous system and the hypothalamic–pituitary–adrenal (HPA) axis, where norepinephrine and epinephrine are major output molecules. This stimulatory effect is accompanied by such symptoms as elevated heart rate and blood pressure, more rapid breathing, increased body temperature and sweating, and pupillary dilation, as well as the intoxicating or euphoric subjective properties of the drug. While many drugs of abuse are thought to achieve their intoxicating effects by modulating the monoaminergic neurotransmitter systems (i.e., serotonin, norepinephrine, dopamine) by binding to these receptors or otherwise affecting their synaptic signaling, this paper puts forth the hypothesis that many of these drugs are actually acutely converted to catecholamines (dopamine, norepinephrine, epinephrine) in vivo, in addition to transformation to their known metabolites. In this manner, a range of stimulants, opioids, and psychedelics (as well as alcohol) may partially achieve their intoxicating properties, as well as side effects, due to this putative transformation to catecholamines. If this hypothesis is correct, it would alter our understanding of the basic biosynthetic pathways for generating these important signaling molecules, while also modifying our view of the neural substrates underlying substance abuse and dependence, including psychological stress-induced relapse. Importantly, there is a direct way to test the overarching hypothesis: administer (either centrally or peripherally) stable isotope versions of these drugs to model organisms such as rodents (or even to humans) and then use liquid chromatography-mass spectrometry to determine if the labeled drug is converted to labeled catecholamines in brain, blood plasma, or urine samples.     

Sapindaceae,cyanolipids, and bugs

Scentless plant bugs (Heteroptera: Rhopalidae) are so named because adults of the Serinethinae have vestigial metathoracic scent glands. Serinethines are seed predators of Sapindales, especially Sapindaceae that produce toxic cyanolipids. In two serinethine species whose ranges extend into the southern United States,Jadera haematoloma andJ. sanguinolenta, sequestration of host cyanolipids as glucosides renders these gregarious, aposematic insects unpalatable to a variety of predators. The blood glucoside profile and cyanogenesis ofJadera varies depending on the cyanolipid chemistry of hosts, and adults and larvae fed golden rain tree seeds (Koelreuteria paniculata) excrete the volatile lactone, 4-methyl-2(5H)-furanone, to which they are attracted.Jadera fed balloon vine seeds (Cardiospermum spp.) do not excrete the attractive lactone. Loss of the usual heteropteran defensive glands in serinethines may have coevolved with host specificity on toxic plants, and the orientation ofJadera to a volatile excretory product could be an adaptive response to save time.Mention of a commercial product does not consititute an endorsement by the USDA.     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

ICP-MS法测定地球化学样品中As、Cr、Ge、V等18种微量痕量元素的研究

建立了测定地球化学样品中包括As、Cr、Ge、V等18种微量、痕量元素的ICP-MS方法。地化试样用HF-HNO3混酸分解后,以1 1 HNO3溶解干渣。由于制样不使用盐酸,避免了Cl对As、Cr、Ge、V的质谱干扰。用国家一级地球化学标准物质GBW 07309制备溶液优化仪器工作参数,并用于校准。方法测定限(6s)为:0.007~6.4μg/g,精密度(RSD%,n=12)为:29%~9.4%,经过国家一级地球化学标准物质的分析验证,结果与标准值吻合。方法已应用于国土资源调查的试样分析。     

2008～2009年世界塑料工业进展

收集了2008年7月～2009年6月世界塑料工业的相关资料,介绍了2008～2009年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、环氧树脂、不饱和聚酯树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍。