共查询到20条相似文献,搜索用时 375 毫秒
1.
2.
机内测试(Built-In-Test,BIT)技术是改善系统或设备测试性和维修性的重要途径。在对弹载计算机BIT技术特征进行研究的基础上,提出了弹载计算机BIT设计的基本准则,提供了一种典型的弹载计算机BIT设计方法,经实践验证该设计方法适用于多种类型的弹载计算机设备,故障检测率不低于90%,故障虚警率不超过2%,显著地提高了弹载计算机的可靠性、可测试性及可维护性。 相似文献
3.
4.
5.
6.
为了实现弹载计算机和惯导的高速数据通信,对数据通信的工程化电路进行了设计.对YH-7000VG型惯导的性能进行了分析,并根据仿真系统的需要进行了波特率设置.介绍了RS-232串行口电平驱动电路以及弹载计算机的软件设计,实现了弹载计算机的各项功能.试验表明,弹载计算机完成了空间运动参数的数据采集与处理,满足超声速导弹半实物仿真系统的需要. 相似文献
7.
针对弹载存储测试技术,对弹载数据记录器的经典工作模式做了阐述;与以往一些弹载数据记录器性能相比较,设计在原有基础上从硬件和软件及其工作模式方面做了一些优化;最后还阐述了对存储模块的防护技术.经过实践中的应用,证明本文所述数据记录器系统在工作性能上更加稳定和可靠. 相似文献
8.
9.
基于电容传感器的塑膜厚度检测系统的研究 总被引:6,自引:3,他引:3
采用非接触式电容传感器、电涡流传感器组合系统获取检测信号,利用基于LabVIEW软件平台的计算机实现对塑料薄膜进行在线检测的工作原理,整个系统由测试单元、电机驱动单元、数据采集与处理单元组成.由于测试单元采用了电容、电涡流组合传感系统,信号的后续处理由基于LabVIEW软件平台的计算机自动完成,加速了测量过程.采用本系统取代传统的千分尺测量方法,可以使塑料薄膜厚度测量以完全智能的、实时的、非接触的方式进行精确测量.最后,通过比较组合测量系统与千分尺测量的测试结果,证明了该系统具有较高的精度,良好的可靠性与可行性. 相似文献
10.
针对弹载计算机类产品在出厂交付和故障排除中信号阻抗需要高效测试的要求,文章描述了一种通用阻抗测试仪的实现方法;利用ARM微处理器来控制继电器矩阵切换信号点,并通过配置不同的上位机软件实现了多品种弹载计算机产品的阻抗自动测试,提高了阻抗测试效率,同时避免了人工测试容易误操作的问题;经过某型号弹载计算机试用,该测试仪能够将阻抗测试时间缩短到人工测试的1/9,且全程测试无错误,达到了弹载计算机信号阻抗快速可靠测试的目的。 相似文献
11.
S. Shaw 《Journal of Computer Assisted Learning》1993,9(2):93-99
Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained. 相似文献
12.
European Community policy and the market 总被引:1,自引:0,他引:1
C. Lloyd 《Journal of Computer Assisted Learning》1993,9(2):86-91
Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven. 相似文献
13.
融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。 相似文献
14.
张涛 《计算机测量与控制》2015,23(1):86-89
为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值. 相似文献
15.
Wayne O’Brien Author Vitae 《Journal of Systems and Software》2008,81(11):1997-2013
Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them. 相似文献
16.
17.
This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives. 相似文献
18.
潘丽 《自动化与仪器仪表》2014,(7):80-82
自然界的绝大部分信号都是以模拟的形式存在,因此模拟信号的采集转换存储在数字时代十分关键。文章讨论了在雷达信号处理领域基于AD9626的AD采集存储卡的设计原理、硬件结构和程序设计与芯片配置等问题,为今后相关领域的研究提供了可参考的方案。 相似文献
19.
Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what
is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic
sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and
its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of
an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify
robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can
or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest.
This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January
31–February 2, 2008 相似文献
20.
Jacob Palme 《Software》1979,9(9):741-747
The COM teleconferencing system was designed to be easy to use for both beginners and people with much computer experience. A number of design choices in organizing the human-computer interface were considered very carefully. These design problems are not unique for teleconferencing applications, but will appear in many other developments of human-computer interfaces for non-computer specialists. This report discusses naming conventions, menu format, user commands, help facility and the treatment of ‘type ahead’ from the users. 相似文献