低温真空油炸山药脆片的工艺研究

对比不同油炸方式制作山药片,探究低温真空油炸山药脆片的优点及最佳生产工艺。以感官评价、含油率为考核指标,采用单因素和响应面方法对工艺进行优化,并通过色差仪和扫描电镜做色度及微观结构的观察。试验表明真空低温油炸山药脆片在色泽及含油率明显低于普通油炸方法,其最佳加工工艺为切片厚度6 mm,汽蒸5 min,油炸温度为95℃,油炸时间5 min 40 s,脱油时间为3 min 43 s。     

Optimization of Blanching Conditions Prior to Deep Fat Frying of Yam Slices

The effect of low-temperature blanching and frying time at a frying temperature of 170°C on moisture and oil contents, breaking force and colour of yam chips was investigated using response surface methodology to establish the optimum blanching conditions and frying time. A central composite rotatable design was used to study the effects of variation in levels of blanching temperature (60–80°C), blanching time (1–5 min) and frying time (2–6 min) on quality attributes of yam chips. The effect of blanching temperature and frying time was more significant than the time of blanching on the quality attributes. The response variables were fitted to predictive models applying multiple linear regressions. Statistical analysis with response surface regression showed that moisture content, oil content, breaking force and L? (lightness) parameter were significantly (P < 0.05) correlated with blanching temperature and time and frying time. However, the regression equation showed a poor fit for a? and b? respectively. The optimum conditions were a blanching temperature of 70–75°C, blanching time of 4–5 min while frying for about 5 min.     

Effects of processing conditions on the quality of vacuum fried apple chips

The effects of pretreatment and processing conditions on the quality of vacuum fried apple chips were studied. As blanched apple slices were pretreated by immersing in fructose solution and freezing prior to vacuum frying, more uniform porosity was observed on the surface (or cross-section) of apple chips as examined by scanning electron microscopy (SEM). During vacuum frying, the moisture content and breaking force of apple chips decreased with increasing frying temperature and time while the oil content increased. The L values of fried apple chips decreased apparently with increasing frying temperature. However, when apple slices were fried at 100°C for up to 20 min, both a and b values increased rapidly. Statistical analysis with the central composite rotatable design showed that the moisture content, oil content, color, and breaking force of apple chips were significantly (P⩽0.05) correlated with concentration of immersing sugar solution, frying temperature and frying time. Based on surface responses and contour plots, optimum conditions were: vacuum frying temperature of 100–110°C, vacuum frying time of 20–25 min, and immersing fructose concentration of 30–40%.     

Optimization of processing conditions for vacuum frying of high quality fried plantain chips using response surface methodology (RSM)

Optimization of processing conditions (temperature 122 to 136°C, vacuum pressure 9.91 to 19.91 cmHg, and frying time 3 to 9 min) during vacuum frying of plantain chips was investigated using a Box-Behnken experimental design with response surface methodology (RSM). Models for various responses were developed and optimized frying conditions using numerical solutions were established. Optimized vacuum fried samples were compared with atmospheric fried samples based on the concept of equivalent thermal driving force (ETDF). Frying parameters had significant (p<0.05) effects on the moisture content, texture, and color with a coefficient of determination (R ²) for quadratic model responses varying between 0.53 and 0.99. Optimum vacuum frying conditions for plantain chips were a frying temperature of 133°C, vacuum pressure of 9.91 cmHg, and frying time of 6 min based on desirability concepts. Vacuum fried plantain chips had more acceptable sensory properties, based on ETDF values, than atmospheric fried samples.     

真空油炸胡萝卜脆片基本特性的研究

真空油炸技术可用于生产高品质的果蔬脆片．主要研究了油炸温度和真空度对胡萝卜片水分质量分数、脂肪质量分数、色泽及质构的影响．试验表明：随着油炸温度和真空度的升高，其干燥和脂肪吸收速度相应提高，且两者呈一定的相关性．统计分析可知：油炸温度和真空度并不显著性影响脆片的白度（L）、红度（a）、黄度（b）值（P〉0．05）；对于脆片的破碎力而言，真空度具有显著性影响（P〈O．05），而油炸温度不具有显著性影响（P〉0．05）．     

Effects of processing conditions on the quality of vacuum‐fried carrot chips

The effects of pretreatment and vacuum frying conditions on the quality of fried carrot chips were studied. The moisture and oil contents of fried carrot chips were significantly (p < 0.05) reduced when blanched carrot slices were pretreated by immersion in fructose solution and freezing prior to vacuum frying. Furthermore, more uniform porosity was observed on the vertical cross‐section of carrot chips when examined by scanning electron microscopy. During vacuum frying, the moisture content, colour and breaking force of carrot chips decreased while the oil content increased with increasing frying temperature and time. However, there was no apparent change in Hunter ΔE with time when the frying temperature was below 100 °C and the frying time was below 25 min. Results of this study suggest that vacuum frying at moderate temperature (90–100 °C) for 20 min can produce carrot chips with lower moisture and oil contents as well as good colour and crispy texture. Copyright © 2005 Society of Chemical Industry     

Oil uptake and texture development in fried potato slices

The objective of this work was to study oil absorption and the kinetics of texture development of fried potato slices during frying. Prior to frying, potato slices were blanched in hot water at 85 °C for 3.5 min. Unblanched slices were used as the control. Control and blanched potato slices (Panda variety, diameter: 37 mm, width: 2.2 mm) were fried at 120, 150 and 180 °C until reaching moisture contents of 1.8% (total basis) and their texture and oil content were measured periodically. Oil uptake was higher in 15% for blanched samples than for control samples after 20 s of frying. Besides, the higher the frying temperature, the lower the oil absorption in control samples. Textural changes in fried potato slices were followed by the parameter maximum force (MF) extracted from the force vs. distance curves corresponding to different sampling times. Normalized maximum force (MF*) was used in modeling textural changes in the potato slices during frying in both the initial tissue softening process and the later crust development process. Higher temperatures accelerated these processes; however neither the temperature nor the pre-treatment had a significant effect (P > 0.05) over the final texture of the fried potato chips.     

Vacuum frying as a route to produce novel snacks with desired quality attributes according to new health trends

Consumers look for products that contribute to their wellness and health, however, even health-conscious consumers are not willing to sacrifice organoleptic properties, and intense full-flavor snacks remain an important trend. The objective of this study was to examine most important quality parameters of vacuum (1.92 inHg) and atmospheric-fried carrot, potato, and apple slices to determine specific advantages of vacuum technology. Slices were fried using equivalent thermal driving forces, maintaining a constant difference between oil temperature and the boiling point of water at the working pressure (ΔT = 60 and 80 °C). This resulted in frying temperatures of 160 and 180 °C, and 98 and 118 °C, for atmospheric and vacuum frying, respectively. Vacuum-fried carrot and potato chips absorbed about 50% less oil than atmospheric-fried chips, whereas vacuum-fried apple chips reduced oil absorption by 25%. Total carotenoids and ascorbic acid (AA) were greatly preserved during vacuum frying. Carrot chips vacuum fried at 98 °C retained about 90% of total carotenoids, whereas potato and apple slices vacuum fried at 98 °C, preserved around 95% of their initial AA content. Interestingly, results showed that the antioxidant capacity of chips may be related to both the presence of natural antioxidants and brown pigments developed at elevated temperatures. PRACTICAL APPLICATION: A way to reduce detrimental effects of deep-fat frying is through operating-pressure reduction, the essence behind vacuum deep-fat frying. In this way, it is possible to remove product moisture at a low temperature in a low-oxygen environment. The objective of this research was to study the effect of oil temperature reduction when vacuum frying traditional (potatoes) and nontraditional products (carrots and apples) on most important quality attributes (vitamins, color, and oil uptake). Results are promising and show that vacuum frying can be an alternative to produce nutritious and novel snacks with desired quality attributes, since vitamins and color were greatly preserved and oil absorption could be substantially reduced.     

Effects of osmotic pretreatment and frying conditions on quality and storage stability of vacuum-fried pumpkin chips

The effects of osmotic (OP), ultrasound-assisted osmotic pretreatment (UAOP) and frying conditions on quality and storage stability of vacuum fried pumpkin chips were investigated. The pumpkin samples were pretreated in maltodextrin solution and subsequently fried at different temperatures (90–110 °C) and time periods (10–30 min). The results demonstrated that the moisture content, water activity, lightness, yellowness and carotenoid content of the fried chips decreased, while oil content, hardness and a* (dark brown colour) value increased with increasing frying temperature and time. UAOP reduced about 16.0% of oil absorption and enhanced approximately 70% of carotenoid retention in the fried chips. UAOP samples were also more stable during storage than the untreated ones, indicated by lower degradation kinetics constants of key quality parameters. The proposed pretreatment could be an effective method for food industries to develop vacuum fried pumpkin chips with improved quality and stability.     

EVALUATION OF THE TEXTURE OF FRIED POTATOES

Texture of potatoes with different shapes (slices and strips) were evaluated after frying and in some cases after baking. Blanched and unblanched potato slices (Bintje variety) were fried at four oil temperatures: 160, 170, 180 and 190C until reaching a moisture content of ∼1.7%. A puncture test with three point support for the slices was applied to measure the texture of potato chips using the following parameters extracted from the force versus distance curves: maximum force of break (MFB) and deformation of break (DB). These two parameters were useful to follow the changes in texture of the fried slices with moisture content at different frying temperatures. Blanched and unblanched potato strips were partially fried at 160C and 190C for 60, 90 and 120 s. The par-fried potatoes were frozen at -20C for one day after which they were baked at 200C for 15 min. The texture of the baked potato strips was evaluated using a bending test with two support points. From the force versus distance curves, two parameters were extracted: maximum force of deformation (MFD) and maximum deformation (MD). Significant higher MFB and lower DB values (P > 0.1) for unblanched fried slices indicate that these are crispier than blanched chips for moisture contents lower than 4% (6.59 N and 0.62 mm vs 5.74 N and vs 0.75 mm for unblanched and blanched chips, respectively, average values for the four frying temperatures employed). There was no effect of the frying temperature and the pretreatment (blanching or unblanching) on the texture of the frozen par-fried potatoes after baking when compared at the same residual moisture content, but blanched potato strips lost moisture more slowly both in frying and in baking.     

The optimization of vacuum frying to dehydrate carrot chips

The effects of pretreatment and processing conditions, such as frying temperature, absolute vacuum pressure and frying time; on the properties of fried carrot chips were studied. Statistical analysis with response surface regression showed that moisture content, fat content and breaking force of carrot chips were significantly (P < 0.05) correlated with frying temperature, vacuum absolute pressure and frying time. The optimum conditions were a vacuum frying temperature of 100–110 °C, a vacuum absolute pressure of 0.010–0.020 MPa and a frying time of 15 min.     

常压煎炸和真空煎炸对中国对虾品质的影响

探究常压煎炸和真空煎炸对中国对虾理化性质和感官品质的影响。测定了不同煎炸温度下两种煎炸方式对中国对虾的水分含量、含油量、色泽、虾青素含量和感官品质的影响。结果表明：随着煎炸温度的升高,两种煎炸方式下中国对虾的水分含量均降低,含油量均增加,但真空煎炸下中国对虾的变化幅度较低;两种煎炸方式下中国对虾的虾青素含量均随着煎炸温度的升高呈现先增加后减少的趋势;相同热驱动力下,真空煎炸的中国对虾的色泽、虾青素含量和感官品质均优于常压煎炸的。相比于常压煎炸,真空煎炸的中国对虾品质更佳。     

低温真空油炸薯片生产工艺及其贮藏条件的研究

对马铃薯片进行低温真空油炸生产工艺的基础性研究,分析薯片在贮藏过程中水分、脂肪和VC含量的变化,并探讨等温吸湿规律。通过单因素试验确定最优的油炸工艺参数为温度105℃,时间20min,真空度0.090MPa;离心脱油的最佳条件为脱油转速400～500r/min,时间5～7min,真空度0.090MPa。研究结果对低温真空油炸薯片技术具有很好的指导和促进作用,同时改善了现在油炸薯片的品质和提高了能源利用率。     

Two-stage frying process for high-quality sweet-potato chips

Vacuum frying (1.33 kPa), with the aid of a de-oiling mechanism, was used to produce low-fat sweet potato chips. The kinetics of oil absorption and oil distribution in the chips (total, internal, and surface oil content) was studied so that effectiveness of the de-oiling system could be established. Product quality attributes (PQAs) such as moisture content, oil content, diameter shrinkage, and thickness expansion, as well as, color, texture, bulk density, true density, and porosity of chips fried at different temperatures (120, 130, and 140 °C) was performed to evaluate the effect of process temperature on the product.     

Effect of Osmotic Dehydration and Vacuum-Frying Parameters to Produce High-Quality Mango Chips

ABSTRACT:  Mango ( Mangifera indica  L.) is a fruit rich in flavor and nutritional values, which is an excellent candidate for producing chips. The objective of this study was to develop high-quality mango chips using vacuum frying. Mango (" Tommy Atkins ") slices were pretreated with different maltodextrin concentrations (40, 50, and 65, w/v), osmotic dehydration times (45, 60, and 70 min), and solution temperatures (22 and 40 °C). Pretreated slices were vacuum fried at 120, 130, and 138 °C and product quality attributes (oil content, texture, color, carotenoid content) determined. The effect of frying temperatures at optimum osmotic dehydration times (65 [w/v] at 40 °C) was assessed. All samples were acceptable (scores > 5) to consumer panelists. The best mango chips were those pretreated with 65 (w/v) concentration for 60 min and vacuum fried at 120 °C. Mango chips under atmospheric frying had less carotenoid retention (32%) than those under vacuum frying (up to 65%). These results may help further optimize vacuum-frying processing of high-quality fruit-based snacks.     

Effect of Microwave Frying on Acrylamide Generation,Mass Transfer,Color, and Texture in French Fries

The objective of this work was to evaluate the effect of microwave power on acrylamide generation, as well as moisture and oil fluxes and quality attributes of microwave-fried potatoes. Concretely, 25 g of potato strips, in 250 mL of fresh oil (at room temperature), were subjected to three different microwave powers (315, 430, and 600 W) in a conventional microwave oven. Microwave frying resulted in an acrylamide reduction ranged from 37 to 83% compared to deep-oil frying. Microwave-fried French fries presented lower moisture and higher fat content than deep-oil fried potatoes. Concretely, microwave-fried potatoes presented values of moisture and texture more similar to potato chips than French fries, nonetheless with lower fat levels (less than 20 g/100 g wb) and acrylamide content (lower than 100 μg/kg wb) at the reference time. This study presents an alternative way of frying to address the production of healthier potato chips.     

EFFECTS OF PREFRY DRYING METHODS ON THE QUALITY OF DEEP FAT FRIED ONION SLICES

Deep fat fried onion slices are used widely as a condiment for hot-dogs and other types of bread and meat combinations in Denmark, Netherlands and Germany. Since there is a consumer demand for food products, high in both sensory and nutritional quality, the effect of prefry drying on the oil content and the color of the fried product was investigated. In order to reduce the oil content in the fried product, raw sliced onions were prefry dried by (1) hot air in a forced air convection oven, (2) microwaving in an oven with a conveyor belt, or (3) freeze dried. For each of the three methods a series of eight batches ranging from 13–30 % dry matter content in the raw onions were obtained. The product that was dried by hot air before frying was lighter than the product prefry dried by microwaving. The product of the freeze dried material was heterogeneous, and the results were excluded. The fried product from dried raw onions, showed the moisture content to be independent of the manipulated dry matter content. The oil content was reduced from about 55% to about 49%, as a result of increasing the dry matter content; however the surface color became darker (L-value was reduced about 6 point).     

Comparison between atmospheric and vacuum frying of apple slices

Vacuum deep-fat frying is a new technology that can be used to improve quality attributes of fried food because of the low temperatures employed and minimal exposure to oxygen. In this paper atmospheric and vacuum frying of apple slices were compared, in terms of oil uptake, moisture loss and color development. In addition, some apple slices were pre-dried (up to 64% w.b.) before vacuum frying to determine the overall effect. To carry out appropriate comparisons between both technologies equivalent thermal driving forces were used in both processes (ΔT = 40, 50, 60 °C), keeping a constant difference between the oil temperature and the boiling point of water at the working pressure. Vacuum frying was shown to be a promising technique that can be used to reduce oil content in fried apple slices while preserving the color of the product. Particularly, drying prior to vacuum frying was shown to give the best results. For instance, when using a driving force of ΔT = 60 °C, pre-dried vacuum fried slices absorbed less than 50% of the oil absorbed by atmospheric fried ones. Interestingly, a strong relationship between water loss and oil content was observed in both technologies, allowing the extension of observations that have been made for atmospheric frying.     

PHYSICOCHEMICAL CHANGES IN STARCH DURING DEEP-FAT FRYING OF A MOLDED CORN STARCH PATTY

Corn starch patties with an initial moisture content of 46.5% (wet basis) were fried in oil at 165C. The results indicated that oil content in the patty ranged from 10.6 to 12.5% in the crust region, and 1.5 to 3.9% in the core region. Starch gelatinization was significantly dependent on frying time and location of starch in the patty. Both, water absorption and water solubility indices of starch increased with frying time, with the starch contained in the crust exhibiting much higher water absorption ability and water solubility than that contained in the core region. Measurements of 'blue value'(the intensity of blue color of starch solution upon addition of iodide ion) and the absorbance spectra of starch samples indicated that amylose-lipid complexes were present in the fried materials. The degree of starch complexation was 10.9 to 13.2% in the crust and 0.3 to 6.6% in the core region. The puncture force on the surface of a food fried for no more than 5 min was close to that in the food center, although a significant increase in force was required for the crust region during the later stages of frying.     

Effects of maltodextrin level,frying temperature and time on the moisture,oil and beta‐carotene contents of vacuum‐fried apricot slices

Response surface methodology was used to investigate the effects of frying temperature, time and maltodextrin (MD) levels on the moisture, oil and beta‐carotene contents of the vacuum‐fried apricot slices. Based on the results, the moisture content of vacuum‐fried apricot slices decreases with increasing frying temperature and frying time. Generally, the oil content of vacuum‐fried apricot slices decreases with decreasing frying temperature and frying time. The beta‐carotene content of vacuum‐fried apricot slices increases with increasing frying temperature. But the trend of increase in the beta‐carotene content of the product with frying temperature was higher at lower MD level. When processing vacuum‐fried apricot slices, a frying temperature of 100 °C, frying time of 72.5 min and an MD level of 70% must be used to achieve a product of acceptable moisture, oil and beta‐carotene contents.