Solid ionic matrixes for direct tissue analysis and MALDI imaging

Direct analysis of tissue by MALDI-MS allows the acquisition of its biomolecular profile while maintaining the integrity of the tissue, giving cellular localization, and avoiding tedious extraction and purification steps. However, direct tissue analysis generally leads to some extent to a lowered spectral quality due to variation in thickness, freezing tissue date, and nature of the tissue. We present here new technical developments for the direct tissue analysis of peptides with ionic liquid made of matrix mixtures (alpha-cyano-4-hydroxycinnamic acid (CHCA)/2-amino-4-methyl-5-nitropyridine and alpha-cyano-4-hydroxycinnamic acid/N,N-dimethylaniline (CHCA/DANI)). The properties of these direct tissue analysis matrixes, especially CHCA/aniline when compared to CHCA, 2,5-dihydroxybenzoic acid, and sinapinic acid, are as follows: (1) better spectral quality in terms of resolution, sensitivity, intensity, noise, number of compounds detected, and contaminant tolerance, (2) better crystallization on tissues, i.e., coverage capacity, homogeneity of crystallization, homogeneity of crystal sizes, and time of crystallization, (3) better analysis duration in term of vacuum stability, (4) better resistance to laser irradiation especially for high-frequency lasers, (5) better ionic yield in negative mode, and (6) enough fragmentation yield to use the PSD mode on sections to get structural information. Applied to MALDI imaging on a MALDI LIFT-TOF with a 50-Hz laser frequency, these ionic matrixes have allowed the realization of a new type of image in both polarities and reflector mode using the same tissue section. These results give a new outlook on peptide tissue profiling by MS, characterization of compounds from tissue slices, and MALDI-MS high-quality imaging.     

Alkylated dihydroxybenzoic acid as a MALDI matrix additive for hydrophobic peptide analysis

Hydrophobic peptides are generally difficult to detect using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) because the majority of MALDI matrixes are hydrophilic and therefore have a low affinity for hydrophobic peptides. Here, we report on a novel matrix additive, o-alkylated dihydroxybenzoic acid (ADHB), which is a 2,5-dihydroxybenzoic acid (DHB) derivative incorporating a hydrophobic alkyl chain on a hydroxyl group to improve its affinity for hydrophobic peptides, thereby improving MALDI-MS sensitivity. The addition of ADHB to the conventional matrix α-cyano-4-hydroxycinnamic acid (CHCA) improved the sensitivity of hydrophobic peptides 10- to 100-fold. The sequence coverage of phosphorylase b digest was increased using ADHB. MS imaging indicated that hydrophobic peptides were enriched in the rim of a matrix/analyte dried spot when ADHB was used. In conclusion, the addition of ADHB to the standard matrix led to improved sensitivity of hydrophobic peptides by MALDI-MS.     

Fragmentation characteristics of neutral N-linked glycans using a MALDI-TOF/TOF tandem mass spectrometer

The fragmentation characteristics of native and permethylated oligosaccharides using a matrix-assisted laser desorption/ionization (MALDI) time-of-flight/time-of-flight tandem mass spectrometer are described. The use of two MALDI matrixes, alpha-cyano-4-hydroxycinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB), is shown to control the nature and extent of fragmentation observed in collision-induced dissociation experiments on synthetic oligosaccharides. CHCA promotes the occurrence of glycosidic cleavages, whereas DHB promotes a wide range of fragmentations. These latter fragmentations include glycosidic cleavages, cross-ring cleavages, and the formation of "internal" cleavage ions, which are derived from elimination of substituents from around the pyranose ring. This extensive fragmentation is shown to facilitate the detailed structural characterization of high-mannose and hybrid-type N-glycans purified from avidin. Importantly, the cross-ring fragments reveal linkage information, unambiguously define antennae substitutions, and differentiate isomeric glycoforms.     

Rational selection of the optimum MALDI matrix for top-down proteomics by in-source decay

In-source decay (ISD) in MALDI leads to c- and z-fragment ion series enhanced by hydrogen radical donors and is a useful method for sequencing purified peptides and proteins. Until now, most efforts to improve methods using ISD concerned instrumental optimization. The most widely used ISD matrix is 2,5-dihydroxybenzoic acid (DHB). We present here a rational way to select MALDI matrixes likely to enhance ISD for top-down proteomic approaches. Starting from Takayama's model (Takayama, M. J. Am. Soc. Mass Spectrom. 2001, 12, 1044-9), according to which formation of ISD fragments (c and z) would be due to a transfer of hydrogen radical from the matrix to the analyte, we evaluated the hydrogen-donating capacities of matrixes, and thus their ISD abilities, with spirooxazines (hydrogen scavengers). The determined hydrogen-donating abilities of the matrixes are ranked as follows: picolinic acid (PA) > 1,5-diaminonaphtalene (1,5-DAN) > DHB > sinapinic acid > alpha-cyano-4-hydroxycinnamic acid. The ISD enhancement obtained by using 1,5-DAN compared to DHB was confirmed with peptides and proteins. On that basis, a matrix-enhanced ISD approach was successfully applied to sequence peptides and proteins up to approximately 8 kDa. Although PA alone is not suitable for peptide and protein ionization, ISD signals could be further enhanced when PA was used as an additive to 1,5-DAN. The optimized matrix preparation was successfully applied to identify larger proteins by large ISD tag researches in protein databases (BLASTp). Coupled with an adequate separation method, ISD is a promising tool to include in a top-down proteomic strategy.     

In situ sequencing of peptides from biological tissues and single cells using MALDI-PSD/CID analysis

The ability to directly sequence peptides from biological cells using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) with postsource decay (PSD) and collision-induced dissociation (CID) fragment ion mass analysis is explored. Three different sample preparation methods are described for sequencing peptides in tissue samples and in single neurons from the invertebrate model Aplysia californica. To characterize peptides from the atrial gland, MALDI-PSD/CID is applied directly to a tissue blot covered with the matrix alpha-cyano-4-hydroxycinnamic acid (CHCA). The resulting fragment ions combined with database searching confirm the structure of several novel peptides encoded by egg-laying hormone genes. Moreover, MS profiling of a single unidentified neuron detects peptides with molecular weights of myomodulins C and E; this assignment is confirmed using MALDI-PSD with the matrix 2,5-dihydroxybenzoic acid (DHB). DHB does not always provide adequate fragmentation for PSD experiments; therefore, a unique dual-matrix sampling method, employing both DHB and CHCA, is developed to directly sequence a decapeptide from a single cerebral ganglion B cell. Mass accuracy of fragment ions from cellular samples is typical for the instrument employed and is not deleteriously affected by the morphology and complexity of the samples.     

Internal energy of ions generated by matrix-assisted laser desorption/ionization

To provide an objective measure of the correlation between the internal energy content of ions generated by matrix-assisted laser desorption/ionization (MALDI) and the matrix properties, a series of well-characterized benzyl-substituted benzylpyridinium salts were used as thermometer molecules (TMs). To determine the internal energy variations of analyte ions, the survival yields of TM molecular ions were measured in three different matrixes, alpha-cyano-4-hydroxycinnamic acid (CHCA), 3,5-dimethoxy-4-hydroxycinnamic acid (sinapinic acid, SA), and 2,5-dihydroxybenzoic acid (DHB). Statistical analysis of extensive survival yield data indicated that there were discernible differences among the studied matrixes. The experimental survival yields of the TM ions were used to calculate the unimolecular decomposition rate coefficient. Corresponding theoretical reaction rate coefficients were calculated based on the Rice-Ramsperger-Kassel-Marcus (RRKM) theory for different internal energies of the TMs. The internal energies of the ions were obtained by projecting the experimental rate coefficient values onto the theoretical curves obtained by the RRKM calculations. Molecular ions of the analytes showed decreasing survival yields and consequently increasing internal energies in the three matrixes in the following order: CHCA, SA, and DHB with "cold", "intermediate", and "hot" characteristics, respectively. Qualitatively, this could be interpreted as a significant departure from earlier observations suggesting an opposite trend. The classification as hot and cold matrixes should be further qualified by accounting for the influence of laser pulse energy and the nature of the analyte. Higher laser pulse energy led to an elevated level of energy transferred to the analyte, which in turn resulted in a diminished survival yield of the analyte molecular ion. It is quite possible that the assignment of hot and cold reverses as the analyte or the laser energy changes. These findings can help predict the outcome of postsource decay experiments and clarify the concept of hot and cold matrixes in MALDI mass spectrometry.     

Tetraalkylphosphonium-based ionic liquids for a single-step dye extraction/MALDI MS analysis platform

Room temperature ionic liquids, or RTILs, based on tetraalkylphosphonium (PR(4)(+)) cations were used as the basis of a platform that enables separation of dyes from textiles, extraction of dyes from aqueous solution, and identification of the dyes by MALDI-MS in a single experimental step for forensic purposes. Ionic liquids were formed with PR(4)(+) cations and ferulate (FA), α-cyano-4-hydroxycinnamate (CHCA), and 2,5-dihydroxybenzoate (DHB) anions. The use of tetraalkylphosphonium-based ionic liquids in MALDI-MS allowed detection of small molecule dyes without addition of a traditional solid MALDI matrix.     

Particle formation in ambient MALDI plumes

The ablated particle count and size distribution of four solid matrix materials commonly used for matrix-assisted laser desorption ionization (MALDI) were measured with a scanning mobility particle sizer (SMPS) combined with a light scattering aerodynamic particle sizer (APS). The two particle sizing instruments allowed size measurements in the range from 10 nm to 20 μm. The four solid matrixes investigated were 2,5-dihydroxybenzoic acid (DHB), 4-nitroaniline (NA), α-cyano-4-hydroxycinnamic acid (CHCA), and sinapic acid (SA). A thin film of the matrix was deposited on a stainless steel target using the dried droplet method and was irradiated with a 337 nm nitrogen laser at atmospheric pressure. The target was rotated during the measurement. A large number of nanoparticles were produced, and average particle diameters ranged from 40 to 170 nm depending on the matrix and the laser fluence. These particles are attributed to agglomeration of smaller particles and clusters and/or hydrodynamic sputtering of melted matrix. A coarse particle component of the distribution was observed with diameters between 500 nm and 2 μm. The coarse particles were significantly lower in number but had a total mass that was comparable to that of the nanoparticles. The coarse particles are attributed to matrix melting and spallation. Two of the compounds, CHCA and SA, had a third particle size distribution component in the range of 10 to 30 nm, which is attributed to the direct ejection of clusters.     

Ion Yields in UV-MALDI Mass Spectrometry As a Function of Excitation Laser Wavelength and Optical and Physico-Chemical Properties of Classical and Halogen-Substituted MALDI Matrixes

The laser wavelength constitutes a key parameter in ultraviolet-matrix-assisted laser desorption ionization-mass spectrometry (UV-MALDI-MS). Optimal analytical results are only achieved at laser wavelengths that correspond to a high optical absorption of the matrix. In the presented work, the wavelength dependence and the contribution of matrix proton affinity to the MALDI process were investigated. A tunable dye laser was used to examine the wavelength range between 280 and 355 nm. The peptide and matrix ion signals recorded as a function of these irradiation parameters are displayed in the form of heat maps, a data representation that furnishes multidimensional data interpretation. Matrixes with a range of proton affinities from 809 to 866 kJ/mol were investigated. Among those selected are the standard matrixes 2,5-dihydroxybenzoic acid (DHB) and α-cyano-4-hydroxycinnamic acid (HCCA) as well as five halogen-substituted cinnamic acid derivatives, including the recently introduced 4-chloro-α-cyanocinnamic acid (ClCCA) and α-cyano-2,4-difluorocinnamic acid (DiFCCA) matrixes. With the exception of DHB, the highest analyte ion signals were obtained toward the red side of the peak optical absorption in the solid state. A stronger decline of the molecular analyte ion signals generated from the matrixes was consistently observed at the low wavelength side of the peak absorption. This effect is mainly the result of increased fragmentation of both analyte and matrix ions. Optimal use of multiply halogenated matrixes requires adjustment of the excitation wavelength to values below that of the standard MALDI lasers emitting at 355 (Nd:YAG) or 337 nm (N(2) laser). The combined data provide new insights into the UV-MALDI desorption/ionization processes and indicate ways to improve the analytical sensitivity.     

High ion yields of carbohydrates from frozen solution by UV-MALDI

An aqueous acetonitrile solution containing oligosaccharides (maltopentaose and polysaccharides) and a matrix (2,5-dihydroxybenzoic acid) was frozen at 100 K for mass analysis using ultraviolet matrix-assisted laser desorption/ionization (UV-MALDI). Compared with conventional UV-MALDI (i.e., using a dry analyte/matrix mixture), a frozen solution generates more oligosaccharide ions and less fragments from postsource decay. Furthermore, the ion signal is long-lasting, and the analyte distribution features enhanced homogeneity. The ion generation efficiency for this procedure is 20-30 times greater than that for a conventional dried mixture. Interestingly, the percentages for maltopentaose fragmentation from postsource decay for the frozen samples are close to zero (<2%), as compared with the 17% and 40% values found for dried samples at low and high laser fluences, respectively. Comparisons with other UV matrixes (α-cyano-4-hydroxycinnamic acid and sinapinic acid) and ionic liquids (2,5-dihydroxybenzoic acid + pyridine and α-cyano-4-hydroxycinnamic acid + butylamine) were investigated, and possible mechanisms are discussed.     

High-reactivity matrices increase the sensitivity of matrix enhanced secondary ion mass spectrometry

Secondary ion mass spectrometry (SIMS) is a desorption/ionization method in which ions are generated by the impact of a primary ion beam on a sample. Classic matrix assisted laser desorption and ionization (MALDI) matrices can be used to increase secondary ion yields and decrease fragmentation in a SIMS experiment, which is referred to as matrix enhanced SIMS (ME-SIMS). Contrary to MALDI, the choice of matrices for ME-SIMS is not constrained by their photon absorption characteristics. This implies that matrix compounds that exhibit an insufficient photon absorption coefficient have the potential of working well with ME-SIMS. Here, we evaluate a set of novel derivatives of the classical MALDI matrices α-cyano-4-hydroxycinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB) for usability in ME-SIMS. This evaluation was carried out using peptide mixtures of different complexity and demonstrates significant improvements in signal intensity for several compounds with insufficient UV absorption at the standard MALDI laser wavelengths. Our study confirms that the gas-phase proton affinity of a matrix compound is a key physicochemical characteristic that determines its performance in a ME-SIMS experiment. As a result, these novel matrices improve the performance of matrix enhanced secondary ion mass spectrometry experiments on complex peptide mixtures.     

An automated noncontact deposition interface for liquid chromatography matrix-assisted laser desorption/ionization mass spectrometry

A new multichannel deposition system was developed for off-line liquid chromatography/matrix-assisted laser desorption/ionization mass spectrometry (LC/MALDI-MS). This system employs a pulsed electric field to transfer the eluents from multiple parallel columns directly onto MALDI targets without the column outlets touching the target surface. The deposition device performs well with a wide variety of solvents that have different viscosities, vapor pressures, polarities, and ionic strengths. Surface-modified targets were used to facilitate concentration and precise positioning of samples, allowing for efficient automation of high-throughput MALDI analysis. The operational properties of this system allow the user to prepare samples using MALDI matrixes whose properties range from hydrophilic to hydrophobic. The latter, exemplified by alpha-cyano-4-hydroxycinnamic acid, were typically processed with a multistep deposition method consisting of precoating of individual spots on the target plate, sample deposition, and sample recrystallization steps. Using this method, 50 amol of angiotensin II was detected reproducibly with high signal-to-noise ratio after LC separation. Experimental results show that there is no significant decrease in chromatographic resolution using this device. To assess the behavior of the apparatus for complex mixtures, 5 microg of a tryptic digest of the cytosolic proteins of yeast was analyzed by LC/MALDI-MS and more than 13,500 unique analytes were detected in a single LC/MS analysis.     

Fluorinated matrix approach for the characterization of hydrophobic perfluoropolyethers by matrix-assisted laser desorption/ionization time-of-flight MS

Characterization of fluorinated polymers in MALDI is often unsuccessful because commonly used matrixes, such as 2,5-dihydroxybenzoic acid, Indole acrylic acid, alpha-cyano-4-hydroxycinnamic acid, etc., do not desorb/ionize fluorinated polymers efficiently. This could be in part attributed to the unfavorable interaction between the matrix molecules and fluorinated oligomers due to differences in their hydrophobicities. Moreover, the relative cation affinity between the matrix molecules and the fluorinated oligomers may not favor the gas-phase cationization process of the fluorinated oligomers. To overcome these limitations, fluorinated derivates of benzoic acid (pentafluorobenzoic acid) and cinnamic acid (Pentafluoro cinnamic acid) were employed for the desorption/ionization of perfluoropolyethers. Presence of fluorine atoms in the matrix might improve the interaction between the matrix and perfluoroether during the crystallization or ionization step. With a pentafluorobenzoic acid matrix, intact silver cationized oligomers were desorbed, whereas with a pentafluorocinnamic acid matrix, loss of end group was observed. This loss could be rationalized by the dissociation of the silver cationized oligomers via an ion-dipole mechanism. This work shows the possibility of characterizing yet another important class of fluorinated polymer by MALDI-TOFMS.     

Binary matrix for MALDI imaging mass spectrometry of phospholipids in both ion modes

Phospholipids (PLs) are the major building block molecules of cellular membranes. Their composition varies depending on cell types and cellular compartments. Thus, the information regarding PL distribution in tissue has important physiological and pathological significance. Recent developments in imaging mass spectrometry (IMS) have allowed complete mapping of the PL species on tissue. The IMS technique can detect different classes of PLs as well as their location information directly from tissue sections. PL head groups carry either positive and/or negative charges; therefore, IMS experiments must be conducted in both positive- and negative-ion mode to detect all types of phospholipids. Several conventional matrixes were applied on tissue for better identification. This study was conducted to enable appropriate matrix selection and optimized matrix preparation for IMS experiments in both ion modes that maximize PL identification from a single brain tissue section. The optimized matrix 2,5-dihydroxybenzoic acid (DHB) and α-cyano-4-hydroxycinnamic acid (CHCA) with a mixture of trifluoroacetic acid (TFA) and piperidine as ion pairing agents showed improved stability and consistency during both ion mode experiments and successfully identified >100 peaks of PLs determined by parent ion m/z value. Further tandem mass spectrometric analysis (MS/MS) was performed to those PLs that are anatomically important according to their distribution on rat brain tissue section.     

Heterogeneity within MALDI samples as revealed by mass spectrometric imaging

While matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) has revolutionized the manner by which many large molecules are characterized, the highly variable appearance of MALDI mass spectra remains a concern. We have developed MALDI-based imaging as a diagnostic tool for examining the relationships between preparation strategy, sample morphology, and spectral quality. The imaging protocol involves the automated acquisition of mass spectra at 400-1600 positions within a single sample, followed by off-line processing and image display. Several sample types have been characterized, including a simple peptide mixture prepared in dried droplets of 2,5-dihydroxybenzoic acid and in thin films of alpha-cyano-4-hydroxycinnamic acid as well as a complex biological sample consisting of intact peptidergic neurons from the marine mollusk Aplysia californica. Imaging experiments provide a wealth of unbiased information concerning sample defects, spectral reproducibility, mass accuracy, differential analyte distributions, and the validity of internal standards.     

Optimization of sample preparation for peptide sequencing by MALDI-TOF photofragment mass spectrometry

This paper describes the optimization of sample preparation for MALDI 193-nm photofragment ion time-of-flight mass spectrometry to sequence small to medium-sized peptides from peptide mixtures. We show that matrix additives, such as fructose and phenylbutyric acid have a dramatic effect on the abundance of fragment ions observed in the post-source decay spectra. A dried-droplet MALDI matrix consisting of 1:1 alpha-cyano-4-hydroxycinnamic acid/fructose proves to be an excellent matrix for photodissociation because [M + H]+ ions are formed with low internal energies, and the photofragment ion spectrum contains high abundances of sequence-informative ions. The addition of fructose appears to improve overall sample homogeneity and durability, as compared to conventional alpha-cyano-4-hydroxycinnamic acid dried-droplet preparations. MALDI-TOF photodissociation is then used to selectively sequence the peptides bradykinin (RPPGFSPFR), des-Arg9 bradykinin (RPPGFSPF), and substance P-amide (RPKPQQFFGLM-NH2) from a mixture of five peptides.     

Patterned monolayer/polymer films for analysis of dilute or salt-contaminated protein samples by MALDI-MS

This paper describes a surface science/mass spectrometry effort to develop and characterize a patterned gold surface that serves as a MALDI sample platform capable of concentrating and purifying proteins. Using microcontact printing, small (200-microm diameter) hydrophilic spots of bare gold or chemically anchored poly(acrylic acid) (PAA) are patterned at 5-mm intervals in a hydrophobic field consisting of a self-assembled monolayer of hexadecanethiol. Building on recent innovations by others, the small hydrophilic spots concentrate the sample to achieve good reproducibility and high sensitivity in the MALDI signal. One of the key features in this work is the combination of the high density of carboxylate groups in PAA with a small spot size to afford both concentration and purification of proteins via ionic interactions. This translates into detection limits for salt-contaminated proteins that are 20-100 times lower (low femtomole) than those reported for previous polymer- or monolayer-modified MALDI probes (using proteins in the 3-15-kDa range). Reflectance FT-IR spectroscopy and ellipsometry were used to determine the amount of protein adsorbed to a PAA-modified sample plate as a function of pH and salt concentration. Amide absorbances in IR spectra correlate well with MALDI-MS signals measured after addition of 2,5-dihydroxybenzoic acid as a matrix.     

Coumarin tags for improved analysis of peptides by MALDI-TOF MS and MS/MS. 1. Enhancement in MALDI MS signal intensities

The goal of this study was the development of N-terminal tags to improve peptide identification using high-throughput MALDI-TOF MS and MS/MS. The proposed tags, commercially available fluorescent derivatives of coumarin, can be advantageous for peptide analysis in both MS and MS/MS modes. This paper, part 1, will focus on the influence of derivatization on the intensities of MALDI-TOF MS signals of peptides. Labeling peptides with tags containing the coumarin core was found to enhance the intensities of peptide peaks (in some cases over 40-fold) in MALDI-TOF MS using CHCA and 2,5-DHAP matrixes. The signal enhancement was found to be peptide- and matrix-dependent, being the most pronounced for hydrophilic peptides. No correlation was found between the UV absorptivity of the tags at the excitation wavelengths typical for UV-MALDI and the magnitude of the signal enhancement. Interestingly, peptides labeled with Alexa Fluor 350, a coumarin derivative containing a sulfo group (i.e., bearing strong negative charge), showed a 5-15-fold increase in intensity of MALDI MS signal in the positive ion mode, relative to the underivatized peptides, when 2,5-DHAP was used as the matrix. The Alexa Fluor 350 tag yielded a significantly higher signal relative to that for the CAF tag, likely due to the increased hydrophobicity of the coumarin structure. With 2,5-DHB, a decrease of MALDI MS signal was observed for all coumarin-labeled peptides, again relative to the unlabeled species. These findings support the hypothesis that derivatization with coumarin, a relatively hydrophobic structure, improves incorporation of hydrophilic peptides into hydrophobic MALDI matrixes, such as CHCA and 2,5-DHAP.     

Enhanced ionization of phosphorylated peptides during MALDI TOF mass spectrometry

Although alpha-cyano-4-hydroxycinnamic acid functions as an excellent matrix for the analysis of most peptides using matrix-assisted laser desorption/ionization time-of-flight (MALDI TOF) mass spectrometry, the ionization of phosphorylated peptides is usually suppressed by nonphosphorylated peptides. As an alternative matrix, 2',4',6'-trihydroxyacetophenone (THAP) with diammonium citrate was found to overcome this problem for the MALDI TOF mass spectrometric analysis of proteolytic digests of phosphorylated proteins. Specifically, the abundances of phosphorylated peptides in tryptic digests of bovine beta-casein and protein kinase C (PKC)-treated mouse cardiac troponin I were enhanced more than 10-fold using THAP during positive ion MALDI TOF mass spectrometry. The protonated molecules of phosphorylated peptides were sufficiently abundant that postsource decay TOF mass spectrometry was used to confirm the number of phosphate groups in each peptide. Finally, tryptic digestion followed by analysis using MALDI TOF mass spectrometry with THAP as the matrix facilitated the identification of a unique phosphorylation site in PKC-treated troponin I.     

Rapid screening of doping agents in human urine by vacuum MALDI-linear ion trap mass spectrometry

Detection of doping agents in urine frequently requires extensive separation prior to chemical analyses. Gas or liquid chromatography coupled to mass spectrometry has produced accurate and sensitive assays, but chromatographic separations require time and, sometimes, chemical derivatization. To avoid such tedious and lengthy procedures, vacuum matrix-assisted laser desorption ionization (vMALDI) coupled with the linear ion trap mass spectrometry (LIT/MS) technique is tested for its applicability as a rapid screening technique. Commonly used doping agents like nandrolone, boldenone, trenbolone, testosterone, and betamethasone were chosen as study compounds. Different MALDI matrixes like alpha-cyano-4-hydroxycinnamic acid (CHCA), dihyroxy benzoic acid (DHB) with and without cetyl trimethyl ammonium bromide (CTAB), a surfactant, and meso-tetrakis(pentafluorophenyl) porphyrin (F20TPP) were tested. Among them, F20TPP (MW 974.57 Da) was selected as the preferred matrix owing to the lack of interfering matrix peaks at the lower mass range (m/z 100-700). Urine samples spiked with study compounds were processed by solid-phase extraction (SPE) and consistently detected through a linear range of 0.1-100 ng/mL. The limit of detection and lower limit of quantification for all five analytes have been determined to be 0.03 and 0.1 ng/mL, respectively, in urine samples. Testosterone-d3 was used as an internal standard, and the quantitative measurements were achieved by the selective reaction monitoring (SRM) mode. The method was validated and showed consistency in the results. Hence, vMALDI-LIT/MS can be used as a rapid screening method to complement the traditional GC/MS and LC/MS techniques for simultaneous identification, confirmation, and quantification of doping agents in urine.