Physicochemical Characterization of Rutaecarpine-Loaded Microemulsion System

To develop an o/w microemulsion system containing poorly water-soluble rutaecarpine, the solubility of rutaecarpine in water, ethanol, various oils, and surfactants were investigated. Among the surfactants and oils tested, Tween 20/PEG 400 and castor oil were chosen as the surfactant system and oil phase of the microemulsion, as rutaecarpine was most soluble in them, respectively. Pseudoternary phase diagrams were constructed to obtain the concentration range of oil, surfactant, and cosurfactant for microemulsion formation, and the stability test of rutaecarpine delivered by microemulsion formation was then evaluated. Pseudoternary phase diagrams show that the areas of microemulsion appeared at those with 0–20% Smix (PEG 400/Tween80 = 60/40), 64–81% water, and 10–20% oil. The rutaecarpine (300 µg/g)-loaded microemulsion composed of 10.8% PEG 400, 7.2% Tween 80, 20% caster oil, and 72% water was physically and chemically stable for at least 6 months. Thus, the microemulsion system composed of castor oil, PEG 400, Tween 80, and water could be a stable dosage form for rutaecarpine.     

Short communication: in vivo evaluation of microemulsion system for oral and parenteral delivery of rutaecarpine to rats

Rutaecarpine-loaded microemulsion composed of 10.8% polyethylene glycol 400, 7.2% Tween 80, 20% caster oil, and 62% water were previously reported to be physically and chemically stable for at least 6 months. For the development of a Rutaecarpine-loaded microemulsion, here we studied the pharmacokinetic profiles of rutaecarpine after oral and intravenous administration of rutaecarpine-loaded microemulsion compared to suspension. The AUC of rutaecarpine from microemulsion after oral and intravenous administration increased about three-fold compared with that from suspension. Furthermore, the rutaecarpine-loaded microemulsion gave significantly higher AUC and Cmax than did suspension, suggesting that the oral bioavailability of rutaecarpine in this microemulsion system could be enhanced due to the enhanced solubility of rutaecarpine by microemulsion. Thus, our results indicated that the microemulsion system composed of castor oil, polyethylene glycol 400, Tween 80, and water could be a more effective oral and parenteral dosage form for rutaecarpine.     

Effect of different polysorbates on development of self-microemulsifying drug delivery systems using medium chain lipids

The primary objective of this study was to develop lipid-based self-microemulsifying drug delivery systems (SMEDDS) without using any organic cosolvents that would spontaneously form microemulsions upon dilution with water. Cosolvents were avoided to prevent possible precipitation of drug upon dilution and other stability issues. Different polysorbates, namely, Tween 20, Tween 40, Tween 60, and Tween 80, were used as surfactants, and Captex 355 EP/NF (glycerol tricaprylate/caprate) or its 1:1 mixture with Capmul MCM NF (glycerol monocaprylocaprate) were used as lipids. Captex 355-Tween-water ternary phase diagrams showed that oil-in-water microemulsions were formed only when the surfactant content was high (80–90%) and the lipid content low (10–20%). Thus, mixtures of Tweens with Captex 355 alone were not suitable to prepare SMEDDS with substantial lipid contents. However, when Captex 355 was replaced with the 1:1 mixture of Captex 355 and Capmul MCM, clear isotropic microemulsion regions in phase diagrams with sizes in the increasing order of Tween 20?相似文献   

Development and characterization of self-microemulsifying drug delivery system of tacrolimus for intravenous administration

Tacrolimus (FK 506), a poorly soluble immunosuppressant is currently formulated in nonaqueous vehicle containing hydrogenated castor oil derivative for intravenous administration. Hydrogenated castor oil derivatives are associated with acute anaphylactic reactions. This proposes to overcome the problems of poor aqueous solubility of the drug and the toxicity associated with currently used excipients by the development of a new parenterally acceptable formulation using self-microemulsifying drug delivery system (SMEDDS). Solubility of FK 506 in various oils, surfactants, and cosurfactants was determined to identify SMEDDS components. Phase diagrams were constructed at different ratios of surfactants:cosurfactant (K(m)) to determine microemulsion existence area. Influence of oily phase content, K(m), aqueous phase composition, dilution, and incorporation of drug on mean globule size of microemulsions was studied. SMEDDSs were developed using ethyl oleate as oily phase and Solutol HS 15 as surfactant. Glycofurol was used successfully as a cosurfactant. Developed SMEDDS could solubilize 0.8% (wt/wt) FK 506 and on addition to aqueous phase could form spontaneous microemulsion with mean globule size < 30 nm. The resulting microemulsion was iso-osmotic, did not show any phase separation or drug precipitation even after 24 h, and exhibited negligible hemolytic potential to red blood cells.     

Development and Characterization of Self-Microemulsifying Drug Delivery System of Tacrolimus for Intravenous Administration

Tacrolimus (FK 506), a poorly soluble immunosuppressant is currently formulated in nonaqueous vehicle containing hydrogenated castor oil derivative for intravenous administration. Hydrogenated castor oil derivatives are associated with acute anaphylactic reactions. This proposes to overcome the problems of poor aqueous solubility of the drug and the toxicity associated with currently used excipients by the development of a new parenterally acceptable formulation using self-microemulsifying drug delivery system (SMEDDS). Solubility of FK 506 in various oils, surfactants, and cosurfactants was determined to identify SMEDDS components. Phase diagrams were constructed at different ratios of surfactants: cosurfactant (K_m) to determine microemulsion existence area. Influence of oily phase content, K_m, aqueous phase composition, dilution, and incorporation of drug on mean globule size of microemulsions was studied. SMEDDSs were developed using ethyl oleate as oily phase and Solutol HS 15 as surfactant. Glycofurol was used successfully as a cosurfactant. Developed SMEDDS could solubilize 0.8% (wt/wt) FK 506 and on addition to aqueous phase could form spontaneous microemulsion with mean globule size < 30 nm. The resulting microemulsion was iso-osmotic, did not show any phase separation or drug precipitation even after 24 h, and exhibited negligible hemolytic potential to red blood cells.     

The effect of component of microemulsion for transdermal delivery of nicardipine hydrochloride

Purpose: Nicardipine hydrochloride has been used widely for the treatment of angina pectoris and hypertension. Because of its extensive first pass metabolism after oral administration, the transdermal administration of nicardipine microemulsions was developed in this study. Methods: Microemulsions consisted of isopropyl myristate (IPM), surfactant mixture of Tween 80/Span 80 and/or Tween 80/Span 20, co-surfactant (ethanol) and aqueous phase. Pseudo-ternary phase diagrams were constructed using water titration method. The effect of component of microemulsion on the percutaneous absorption of drug was evaluated by in vitro permeation study. Results: The area of microemulsion isotropic region in the presence of ethanol was comparably larger in the absence of ethanol. The mean droplet size of nicardipine microemulsions ranged from 70 to 123 nm. With addition of ethanol, the droplet size became smaller. The permeation rate and extent of nicardipine microemulsion transport across rat skin was affected by the components of microemulsion. Nicardipine microemulsion had higher flux at surfactant mixture with lower hyrophile-lipophile balance (HLB) value and Tween content. Conclusions: The microemulsion consisted of 52% IPM, 35% surfactant mixture and 13% water had higher permeation rate through rat skin above 122.53±1.87 μg/cm2/h and was expected to develop a transdermal delivery system.     

Effects of surfactant on release characteristics of clonidine hydrochloride from ethylcellulose film

The effects of Tween 80 (polysorbate 80) and Span 80 (sorbitan monooleate) surfactants on release characteristics of clonidine hydrochloride from ethylcellulose 10 and 20 cps matrix films containing castor oil as a plasticizer were investigated. The release rates of drug from these films in water at 37°C were found to increase with the addition of surfactant, which was highest for the film prepared from ethylcellulose 20 cps with Tween 80. The experimental values of the cumulative amount of drug released were found to conform to the solution matrix model. The calculated values of the cumulative amount of clonidine hydrochloride released using the experimentally determined diffusion coefficients were also found to be in good agreement with the observed values.     

In-vitro and in-vivo comparison of T-OA microemulsions and solid dispersions based on EPDC

The goal of this study was to enhance the absorption of a new water-insoluble antitumor lead compound, T-OA (3β-hydroxyolea-12-en-28-oic acid-3, 5, 6-trimethylpyrazin-2-methyl ester). Early-stage preparation discovery concept (EPDC) was employed in this study. Based on this concept, a microemulsion system was chosen as the method of improving bioavailability. The solubility of T-OA was checked in different oils, surfactants and cosurfactants. Ternary phase diagrams were constructed to evaluate the microemulsion domain. Developed high-performance liquid chromatography method was used to determine drug content. The transparent o/w microemulsion formulation composed of oleic acid (oil), Tween 80 (surfactant), ethanol (co-surfactant) and water enhanced the solubility of T-OA up to 20?mg/mL. It was characterized in terms of appearance, content, viscosity, zeta potential, conductivity, morphology and particle size. The particle size distribution, viscosity, conductivity and zeta potential were found to be 70?nm, 15.57?MPa?s, 44.1?μS?cm^?1 and ?0.174, respectively. Oral bioavailability of T-OA microemulsion and oleic acid solution were checked by using rat model. Contrast to the solid dispersion and proto drug, the area-under-the-curve (AUC) of T-OA microemulsion and oleic acid solution were significantly enhanced. The relative bioavailability of T-OA microemulsion was found to be 5654.7%, which is 57-fold higher than the pure drug. Improved T-OA solubility in microemulsion was found sustained 48?h in dilution study. While the solid dispersion may precipitate under the gastrointestinal circumstance based on dilution results. The in-vivo and in-vitro results indicated that, compare to improve the solubility, it is more important to maintain and prolong the T-OA dissolved status, for improvement of the in-vivo absorption.     

Preparation,characterization and in vitro evaluation of microemulsion of raloxifene hydrochloride

Raloxifene hydrochloride (RLX) is a selective estrogen receptor modulator which is orally used for treatment of osteoporosis and prevention of breast cancer. The drug has low aqueous solubility and bioavailability. The aim of the present study is to formulate and characterize oil-in-water microemulsion systems for oral delivery of RLX. To enhance the drug aqueous solubility, microemulsion based on sesame oil was prepared. Sesame oil and Tween 80 were selected as the drug solvent oil and surfactant, respectively. In the first and second formulations, Edible glycerin and Span 80 were applied as co-surfactant, respectively. Pseudo-ternary phase diagrams showed that the best surfactant/co-surfactant ratios in the first and second formulations were 4:1 and 9:1, respectively. The particle size of all free drug-loaded and drug loaded samples were in the range of 31.25?±?0.3?nm and 60.9?±?0.1?nm, respectively. Electrical conductivity coefficient and refractive index of all microemulsion samples confirmed the formation of oil-in-water type of microemulsion. In vitro drug release profile showed that after 24?hours, 46% and 63% of the drug released through the first formulation in 0.1% (w/v) Tween 80 in distilled water as a release medium and phosphate buffer solution (PBS) at pH?=?5.5, respectively. These values were changed to 57% and 98% for the second formulation. Results confirmed that the proposed microemulsion system containing RLX could improve and control the drug release profile in comparison to conventional dosage form.     

Effects of Surfactant on Release Characteristics of Clonidine Hydrochloride from Ethylcellulose Film

The effects of Tween 80 (polysorbate 80) and Span 80 (sorbitan monooleate) surfactants on release characteristics of clonidine hydrochloride from ethylcellulose 10 and 20 cps matrix films containing castor oil as a plasticizer were investigated. The release rates of drug from these films in water at 37°C were found to increase with the addition of surfactant, which was highest for the film prepared from ethylcellulose 20 cps with Tween 80. The experimental values of the cumulative amount of drug released were found to conform to the solution matrix model. The calculated values of the cumulative amount of clonidine hydrochloride released using the experimentally determined diffusion coefficients were also found to be in good agreement with the observed values.     

Preparation,Evaluation, and NMR Characterization of Vinpocetine Microemulsion for Transdermal Delivery

A novel microemulsion was prepared to increase the solubility and the in vitro transdermal delivery of poorly water‐soluble vinpocetine. The correlation between the transdermal permeation rate and structural characteristics of vinpocetine microemulsion was investigated by pulsed field gradient nuclear magnetic resonance (PFG‐NMR). For the microemulsions, oleic acid was chosen as oil phase, PEG‐8 glyceryl caprylate/caprate (Labrasol®) as surfactant (S), purified diethylene glycol monoethyl ether (Transcutol P®) as cosurfactant (CoS), and the double‐distilled water as water phase. Pseudo‐ternary phase diagrams were constructed to obtain the concentration range of each component for the microemulsion formation. The effects of various oils and different weight ratios of surfactant to cosurfactant (S/CoS) on the solubility and permeation rate of vinpocetine were investigated. Self‐diffusion coefficients were determined by PFG‐NMR in order to investigate the influence of microemulsion composition with the equal drug concentration on their transdermal delivery. Finally, the microemulsion containing 1% vinpocetine was optimized with 4% oleic acid, 20.5% Labrasol, 20.5% Transcutol P, and 55% double‐distilled water (w/w), in which drug solubility was about 3160‐fold higher compared to that in water and the apparent permeation rate across the excised rat skin was 36.4?±?2.1 µg/cm²/h. The physicochemical properties of the optimized microemulsion were examined for the pH, viscosity, refractive index, conductivity, and particle size distribution. The microemulsion was stable after storing more than 12 months at 25°C. The irritation study showed that the optimized microemulsion was a nonirritant transdermal delivery system.     

Enhanced oral bioavailability of a poorly water soluble drug PNU-91325 by supersaturatable formulations

Supersaturatable cosolvent (S-cosolvent) and supersaturatable self-emulsifying drug delivery systems (S-SEDDS) are designed to incorporate water soluble cellulosic polymers such as hydroxypropyl methylcellulose (HPMC), which may inhibit or retard drug precipitation in vivo. A poorly soluble drug, PNU-91325, was used as a model drug in this study to illustrate this formulation approach. The comparative in vitro studies indicated that the presence of a small amount HPMC in the formulation was critical to achieve a stabilized supersaturated state of PNU-91325 upon mixing with water. An in vivo study was conducted in dogs for assessment of the oral bioavailability of four formulations of PNU-91325. A five-fold higher bioavailability (∼ 60%) was observed from a S-cosolvent formulation containing propylene glycol (PG) + 20 mg/g HPMC as compared to that (∼ 12%) of a neat polyethylene glycol (PEG) 400 formulation. The low bioavailability of the PEG 400 formulation is attributed to the uncontrolled precipitation of PNU-91325 upon dosing, a commonly observed phenomenon with the cosolvent approach. A S-SEDDS formulation composed of 30% w/w Cremophor (surfactant), 9% PEG 400, 5% DMA, 18% Pluronic L44, 20% HPMC, and other minor components showed an oral bioavailability of ∼ 76%, comparable to that of a neat tween formulation (bioavailability: ∼ 68%). The significant improvement of the oral bioavailability of the supersaturatable S-cosolvent and S-SEDDS formulations is attributed to a high free drug concentration in vivo as a result of the generation and stabilization of the supersaturated state due to the incorporation of polymeric precipitation inhibitor.     

Preparation and in vitro evaluation of self-microemulsifying drug delivery systems containing idebenone

A new self-microemulsifying drug delivery system (SMEDDS) was developed to increase the dissolution rate, solubility, and, ultimately, bioavailability of a poorly water soluble drug, idebenone. Pseudoternary phase diagrams were used to evaluate the self-microemulsification existence area, and the release rate of idebenone was investigated. The mixtures consisting of Labrafac hydro or Labrafil 2609 (HLB values > 4) with the surfactant (Labrasol containing 80% Transcutol) and cosurfactant (Plurol oleique WL 1173) were found to be optimum formulations. Using the SMEDDS formulations of 5% to 20% of Labrafac hydro or Labrafil 2609 in combination with the surfactant/cosurfactant mixing ratio of 3, the microemulsion existence field was wider compared to the other SMEDDS formulations due to high affinity for the continuous phase. The in vitro dissolution rate of idebenone from SMEDDS was more than twofold faster compared with that of tablets. The developed SMEDDS formulation can be used as a possible alternative to traditional oral formulations of idebenone to improve its bioavailability.     

Oral bioavailability enhancement of raloxifene by developing microemulsion using D-optimal mixture design: optimization and in-vivo pharmacokinetic study

The objective of this work was to utilize a potential of microemulsion for the improvement in oral bioavailability of raloxifene hydrochloride, a BCS class-II drug with 2% bioavailability. Drug-loaded microemulsion was prepared by water titration method using Capmul MCM C8, Tween 20, and Polyethylene glycol 400 as oil, surfactant, and co-surfactant respectively. The pseudo-ternary phase diagram was constructed between oil and surfactants mixture to obtain appropriate components and their concentration ranges that result in large existence area of microemulsion. D-optimal mixture design was utilized as a statistical tool for optimization of microemulsion considering oil, S_mix, and water as independent variables with percentage transmittance and globule size as dependent variables. The optimized formulation showed 100?±?0.1% transmittance and 17.85?±?2.78?nm globule size which was identically equal with the predicted values of dependent variables given by the design expert software. The optimized microemulsion showed pronounced enhancement in release rate compared to plain drug suspension following diffusion controlled release mechanism by the Higuchi model. The formulation showed zeta potential of value ?5.88?±?1.14?mV that imparts good stability to drug loaded microemulsion dispersion. Surface morphology study with transmission electron microscope showed discrete spherical nano sized globules with smooth surface. In-vivo pharmacokinetic study of optimized microemulsion formulation in Wistar rats showed 4.29-fold enhancements in bioavailability. Stability study showed adequate results for various parameters checked up to six months. These results reveal the potential of microemulsion for significant improvement in oral bioavailability of poorly soluble raloxifene hydrochloride.     

Preparation, evaluation, and NMR characterization of vinpocetine microemulsion for transdermal delivery

A novel microemulsion was prepared to increase the solubility and the in vitro transdermal delivery of poorly water-soluble vinpocetine. The correlation between the transdermal permeation rate and structural characteristics of vinpocetine microemulsion was investigated by pulsed field gradient nuclear magnetic resonance (PFG-NMR). For the microemulsions, oleic acid was chosen as oil phase, PEG-8 glyceryl caprylate/caprate (Labrasol®) as surfactant (S), purified diethylene glycol monoethyl ether (Transcutol P®) as cosurfactant (CoS), and the double-distilled water as water phase. Pseudo-ternary phase diagrams were constructed to obtain the concentration range of each component for the microemulsion formation. The effects of various oils and different weight ratios of surfactant to cosurfactant (S/CoS) on the solubility and permeation rate of vinpocetine were investigated. Self-diffusion coefficients were determined by PFG-NMR in order to investigate the influence of microemulsion composition with the equal drug concentration on their transdermal delivery. Finally, the microemulsion containing 1% vinpocetine was optimized with 4% oleic acid, 20.5% Labrasol, 20.5% Transcutol P, and 55% double-distilled water (w/w), in which drug solubility was about 3160-fold higher compared to that in water and the apparent permeation rate across the excised rat skin was 36.4 ± 2.1 µg/cm²/h. The physicochemical properties of the optimized microemulsion were examined for the pH, viscosity, refractive index, conductivity, and particle size distribution. The microemulsion was stable after storing more than 12 months at 25°C. The irritation study showed that the optimized microemulsion was a nonirritant transdermal delivery system.     

Microemulsion for simultaneous transdermal delivery of benzocaine and indomethacin: in vitro and in vivo evaluation

This study investigated simultaneous transdermal delivery of indomethacin and benzocaine from microemulsion. Eucalyptus oil based microemulsion was used with Tween 80 and ethanol being employed as surfactant and cosurfactant, respectively. A microemulsion formulation comprising eucalyptus oil, polyoxyethylene sorbitan momooleate (Tween 80), ethanol and water (20:30:30:20) was selected. Indomethacin (1% w/w) and benzocaine (20% w/w) were incorporated separately or combined into this formulation before in vitro and in vivo evaluation. Application of indomethacin microemulsion enhanced the transdermal flux and reduced the lag time compared to saturated aqueous control. The same trend was evident for benzocaine microemulsion. Simultaneous application of the two drugs in microemulsion provided similar enhancement pattern. The in vivo evaluation employed the pinprick method and revealed rapid anesthesia after application of benzocaine microemulsion with the onset being 10?min and the action lasting for 50?min. For indomethacin microemulsion, the analgesic effect was recorded after 34.5?min and lasted for 70.5?min. Simultaneous application of benzocaine and indomethacin provided synergistic effect. The onset of action was achieved after 10?min and lasted for 95?min. The study highlighted the potential of microemulsion formulation in simultaneous transdermal delivery of two drugs.     

新型非离子水性聚氨酯表面活性剂的制备及性能

采用甲苯-2,4-二异氰酸酯(TDI)、蓖麻油和聚乙二醇(PEG)等为主要原料,通过逐步聚合得到一种新型非离子水性聚氨酯表面活性剂,并利用红外光谱对其结构进行了表征。实验结果表明,当蓖麻油∶TDI∶PEG-4000=1∶9∶11时,采用依次加入蓖麻油、TDI、PEG的加料方式,能够合成得到综合性能较好的非离子水性聚氨酯表面活性剂。对该表面活性剂在水相中的表面活性进行了测试,结果表明,所制得的非离子水性聚氨酯表面活性剂的临界胶束浓度约为22 g/L,水溶液的最低表面张力可达53 mN/m。     

Semisolid matrix filled capsules: an approach to improve dissolution stability of phenytoin sodium formulation

Seven semisolid fill bases were selected for the formulation of 24 capsule formulations, each containing 100 mg of phenytoin sodium. The fill materials were selected based on the water absorption capacity of their mixtures with phenytoin sodium. The fill matrices included lipophilic bases (castor oil, soya oil, and Gelucire (G) 33/01), amphiphilic bases (G 44/14 and Suppocire BP), and water-soluble bases (PEG 4000 and PEG 6000). The drug:base ratio was 1:2. Excipients such as lecithin, docusate sodium, and poloxamer 188 were added to some formulations. The dissolution rate study indicated that formulations containing lipophilic and amphiphilic bases showed the best release profiles. These are F4 (castor oil-1% docusate sodium); F10 (castor oil-3% poloxamer 188); F14 (G33/01-10% lecithin); F17 (G33/01-1% docusate sodium), and F20 (Suppocire BP). Further, the dissolution stability of the five formulations above was assessed by an accelerated stability study at 30°C and 75% RH using standard Epanutin capsules for comparison. The study included the test and standard capsules either packed in the container of marketed Epanutin capsules (packed) or removed from their outer pack (unpacked). Release data indicated superior release rates of castor oil based formulations (F4 and F10) relative to standard capsules in both the unpacked and packed forms. For instance, the extent of drug release at 30 min after 1 month was 91% for F4 and F10 and 20% for standard capsules. Drug release from packed capsules after 6 months storage was 88% for both formulations F4 and F10 and 35% for standard capsules. In conclusion, the pharmaceutical quality of phenytoin sodium capsules can be improved by using a semisolid lipophilic matrix filled in hard gelatin capsules.     

Mixed lipid phase SMEDDS as an innovative approach to enhance resveratrol solubility

Context: Despite its promising therapeutic activities, clinical use of resveratrol (RSV) is compromised with unfavorable biopharmaceutical properties, namely low water solubility.

Objective: This work deals with improving RSV solubility and release rate through its incorporation in innovative mixed lipid phase self-microemulsifying drug delivery systems (SMEDDS).

Methods: (Pseudo)ternary diagrams were constructed for different oils and surfactant mixtures. Selected systems were further evaluated for RSV solubility, self-emulsification ability, accelerated stability, dynamic viscosity, compatibility with hard gelatin capsules and in vitro dissolution of RSV.

Results: Lipid phase composed of diverse lipid species, castor oil (long-chained triglyceride) and Capmul MCM (mixture of medium chain mono and diglycerides) allowed formulation of mixed lipid SMEDDS with lower surfactants content (60% Cremophor EL/RH 40/RH?60). Mixed lipid phase SMEDDS showed best self-emulsifying ability with regard to self-emulsifying time as well as droplet size and monodispersity of microemulsions obtained upon SMEDDS dilution with aqueous phase. Overall, incorporation of RSV in SMEDDS resulted in improved solubility (over 23-fold) and dissolution rate compared to crystalline RSV. All SMEDDS formulations were adequately viscous for filling into hard gelatin capsules (>150?mPa?s for empty SMEDDS; >400?mPa?s for RSV-loaded SMEDDS) and no leaking was observed during three months of storage.

Conclusion: The presented work indicates the promising potential of mixed lipid SMEDDS formulations for future development of SMEDDS with lower surfactant content and no added cosolvents for incorporation of RSV and other poorly soluble drugs.     

Simultaneous elimination of dissolved and dispersed pollutants from cutting oil wastes using two aqueous phase extraction methods

Oily wastewater experimental study has been accomplished using two aqueous phases extraction methods on the basis of phase separation properties of non-ionic surfactants above the so-called cloud point curve and the solubilization phenomena of coacervate micelles (surfactant rich phase). Two commercial ethoxylate fatty alcohol surfactants (Oxo-C(10)E(3), Oxo-C(15)E(7)) were employed to treat three kinds of cutting oil wastewater, in order to define the conditions promoting cutting oils emulsions destabilization and cloud point extraction possesses simultaneously. Before extraction test, the phase diagrams of binary water/surfactants systems were drawn and the effect of some cutting oil additives on water-surfactant systems was, therefore studied. The results of oily wastewater extraction with respect to wt.% surfactant and temperature were expressed in terms of chemical oxygen demand (COD) of the dilute phase before and after extraction, residual chemical oxygen demand (COD(R)), residual concentrations of surfactant in the dilute phase (X(t,w)) converted to chemical oxygen demand (COD(T)) and the volume fraction of coacervate (phi(c)) at the equilibrium. The results obtained for each parameter which were also represented on three dimensional diagrams using an empirical smoothing method were in agreement with the experimental ones, where the COD(R) was reduced from 55 to 1.1 g O(2)l(-1).