基于灰度差值的HEVC快速帧间编码研究

针对新一代视频压缩编码标准HEVC计算复杂度较高的特点,利用视频序列间时域上的相关性,提出了一种基于灰度差值的编码单元快速划分策略.该策略根据当前编码块与参考块之间的灰度差值进行运动条件判决,在进行编码之前提前确定当前编码单元的编码深度信息,减少帧间预测编码的次数,从而有效地降低了编码端的计算复杂度.实验结果表明,该算法在编码效率和峰值信噪比(PSNR)损失都很小的情况下,和HM标准中的帧间预测算法相比,平均降低了50.18％的编码时间.     

面向AVS2的快速帧间预测算法北大核心

新一代具有自主知识产权的视频编码标准AVS2正在制定当中,其相对于上一代标准而言具有更高的编码效率,但由于使用了多划分模式、多参考帧等技术,其编码复杂度也大幅增加。为了提高AVS2帧间编码速度,提出了一种快速帧间预测算法,在使用非对称运动划分(Asymmetric Motion Partitions,AMP)快速决策算法的基础上,深度挖掘同一编码单元下相邻预测单元之间的相关性,利用邻近预测单元来预测当前块的参考帧,通过判断预测单元的运动矢量残差的曼哈顿距离,以确定最佳参考帧,从而减小参与计算的参考帧数目。实验结果表明,该算法在图像质量和比特率基本保持不变的情况下,有效地提高了AVS2的编码速度。     

面向AVS2的快速帧间预测算法

新一代具有自主知识产权的视频编码标准AVS2正在制定当中,其相对于上一代标准而言具有更高的编码效率,但由于使用了多划分模式、多参考帧等技术,其编码复杂度也大幅增加。为了提高AVS2帧间编码速度,提出了一种快速帧间预测算法,在使用非对称运动划分(Asymmetric Motion Partitions,AMP)快速决策算法的基础上,深度挖掘同一编码单元下相邻预测单元之间的相关性,利用邻近预测单元来预测当前块的参考帧,通过判断预测单元的运动矢量残差的曼哈顿距离,以确定最佳参考帧,从而减小参与计算的参考帧数目。实验结果表明,该算法在图像质量和比特率基本保持不变的情况下,有效地提高了AVS2的编码速度。     

基于深层特征学习的高效率视频编码中帧内快速预测算法

高效视频编码(HEVC)标准相对于H.264/AVC标准提升了压缩效率,但由于引入的编码单元四叉树划分结构也使得编码复杂度大幅度提升.对此,该文提出一种针对HEVC帧内编码模式下编码单元(CU)划分表征矢量预测的多层特征传递卷积神经网络(MLFT-CNN),大幅度降低了视频编码复杂度.首先,提出融合CU划分结构信息的降分辨率特征提取模块;其次,改进通道注意力机制以提升特征的纹理表达性能;再次,设计特征传递机制,用高深度编码单元划分特征指导低深度编码单元的划分;最后建立分段特征表示的目标损失函数,训练端到端的CU划分表征矢量预测网络.实验结果表明,在不影响视频编码质量的前提下,该文所提算法有效地降低了HEVC的编码复杂度,与标准方法相比,编码复杂度平均下降了70.96％.     

基于时空相关性的HEVC帧间模式决策快速算法

新一代的高效率视频编码标准HEVC采用编码树单元（CTU）四叉树划分技术和多达10种的帧间预测单元（PU）模式,有效地提高了编码压缩效率,但也极大地增加了编码计算复杂度。为了减少编码单元（CU）的划分次数和候选帧间PU模式个数,提出了一种基于时空相关性的帧间模式决策快速算法。首先,利用当前CTU与参考帧中相同位置CTU、当前帧中相邻CTU的深度信息时空相关性,有效预测当前CTU的深度范围。然后,通过分析当前CU与其父CU之间的最佳PU模式空间相关性,以及利用当前CU已估计PU模式的率失真代价,跳过当前CU的冗余帧间PU模式。实验结果表明,提出的算法与HEVC测试模型（HM）相比,在不同编码配置下降低了52%左右的编码时间,同时保持了良好的编码率失真性能;与打开快速算法选项的HM相比,所提算法进一步降低了30%左右的编码时间。     

基于深层特征学习的高效率视频编码中帧内快速预测算法

高效视频编码(HEVC)标准相对于H.264/AVC标准提升了压缩效率,但由于引入的编码单元四叉树划分结构也使得编码复杂度大幅度提升。对此,该文提出一种针对HEVC帧内编码模式下编码单元(CU)划分表征矢量预测的多层特征传递卷积神经网络(MLFT-CNN),大幅度降低了视频编码复杂度。首先,提出融合CU划分结构信息的降分辨率特征提取模块;其次,改进通道注意力机制以提升特征的纹理表达性能;再次,设计特征传递机制,用高深度编码单元划分特征指导低深度编码单元的划分;最后建立分段特征表示的目标损失函数,训练端到端的CU划分表征矢量预测网络。实验结果表明,在不影响视频编码质量的前提下,该文所提算法有效地降低了HEVC的编码复杂度,与标准方法相比,编码复杂度平均下降了70.96%。     

基于零块分析的高效视频编码通信

为了实现高清、超高清视频实时编码通信传输, 针对高效视频编码(HEVC)帧间编码计算复杂度过高的问题,根据图像的文理复杂度和 编码单元的零块统计特征,提出一种新的HEVC快速帧间模式判决算法。根据Merge模式下 整单元一分为四的4个子编码单元纹 理相似度确定是否提前终止编码单元(CU)划分,同时利用帧间2N×2N预测模式下零系数与非零系数分布的区域统计特征,选择符合零块分 布特征的最佳预测单元(PU)模式。实验结果表明,在低延迟B(LDB,low-delay B)和随机访 问(RA,random access)配置条件下,提出的算法在保持编码 性能基本不变的情况下,HEVC帧间预测编码时间分别平均减少了60.2%与59.4%。     

3D-HEVC帧间编码的低复杂度算法

3D-HEVC将HEVC先进的编码工具充分应用到3D视频,随之带来的主要问题是编码的高复杂度.针对3D-HEVC的帧间编码提出了两点改进以降低其编码复杂度.首先,根据相邻帧相关性自适应确定编码单元的划分深度,然后通过判断编码单元的运动活跃度来限定预测单元的类型选择.提出的算法经仿真实验证明,在保持码率、PSNR基本不变的情况下,其编码时间平均可减少30％.     

基于多时-空相关的AVS2快速帧间预测算法

针对新一代视频标准AVS2引进四叉树分割、多参考帧等技术而带来的帧间预测复杂度增加的问题,提出一种基于多时-空相关的快速帧间预测算法.该算法利用上下层相邻编码单元(Coding Unit,CU)和空时域相邻CU在预测模式选择上的相关性,计算当前CU的模式复杂度,根据复杂度为当前CU分配合适的候选预测模式;同时利用相邻预测单元(Prediction Unit,PU)在参考帧选择上的相关性,计算当前PU的参考帧索引,根据索引为当前PU分配合适的候选参考帧.实验表明,该算法在BD-Rate(Bjontegaard delta bit rate)增加1.22％,BD-PSNR(Bjontegaard delta peak signal-to-noise rate)降低0.04 dB的前提下,平均减少47.54％的编码时间.     

HEVC帧内CU划分快速算法研究

为了降低帧内编码单元(CU)四叉树划分的计算复杂度,本文提出了一种基于多重纹理的帧内CU划分快速算法.通过提取CU的内容复杂度、方向复杂度以及子CU的内容复杂度差异和方向复杂度差异作为纹理特征,设计了基于双SVM的CU划分决策模型,实现了对复杂纹理CU的提前划分和简单纹理CU的提前终止划分.实验结果表明,该快速算法与x265-1.7相比,码率增加0.47％,亮度峰值信噪比降低0.012 dB,编码时间减少36.87％,有效提高了帧内预测效率.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Nanoimprint Lithography -A Next Generation High Volume Lithography Technique

IntroductionNanoimprint Lithography is a well-acknowl-edged low cost, high resolution, large area pattern-ing process. It includes the most promising methods,high-pressure hot embossing lithography (HEL) [2],UV-cured imprinting (UV-NIL) [3] and micro contactprinting (m-CP, MCP) [4]. Curing of the imprintedstructures is either done by subsequent UV-lightexposure in the case of UV-NIL or by cooling downbelow the glass transition temperature of the ther-moplastic material in case of HEL…     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

Influence of PVK ： NPB hole transporting layer on the characteristics of organic light-emitting devices

A doping system consisting of NPB and PVK is employed as a composite hole transporting layer （CHTL）. By adjusting the component ratio of the doping system, a series of devices with different concentration proportion of PVK ： NPB are constracted. The result shows that doping concentration of NPB enhances the competence of hole transporting ability, and modifies the recombination region of charge as well as affects the surface morphology of doped film. Optimum device with a maximum brightness of 7852 cd/m^2 and a power efficiency of 1.75 lm/W has been obtained by choosing a concentration proportion of PVK ： NPB at 1：3.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.     

Analysis of error performance on Turbo coded FDPIM

Due to variable symbol length of digital pulse interval modulation（DPIM）, it is difficult to analyze the error performances of Turbo coded DPIM. To solve this problem, a fixed-length digital pulse interval modulation（FDPIM） method is provided. The FDPIM modulation structure is introduced. The packet error rates of uncoded FDPIM are analyzed and compared with that of DPIM. Bit error rates of Turbo coded FDPIM are simulated based on three kinds of analytical models under weak turbulence channel. The results show that packet error rate of uncoded FDPIM is inferior to that of uncoded DPIM. However, FDPIM is easy to be implemented and easy to be combined, with Turbo code for soft-decision because of its fixed length. Besides, the introduction of Turbo code in this modulation can decrease the average power about 10 dBm, which means that it can improve the error performance of the system effectively.     

A method for calculating the center position of collimated light

It is a key problem to accurately calculate beam spots＇ center of measuring the warp by using a collimated laser. A new method, named double geometrical center method （DGCM）, is put forward for the first time. In this method, a plane wave perpendicularly irradiates an aperture stop, and a charge couple device （CCD） is employed to receive the diffraction-beam spots, then the geometrical centers of the fast and the second diffraction-beam spots are calculated respectively, and their mean value is regarded as the center of datum beam. In face of such adverse instances as laser intension distributing defectively, part of the image being saturated, this method can still work well. What＇s more, this method can detect whether an unacceptable error exits in the courses of image receiving, processing and calculating. The experimental results indicate the precision of this method is high.     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.