共查询到18条相似文献,搜索用时 78 毫秒
1.
根据汶川大地震后震中区几座大型水利工程的震害情况,阐述了水利工程抗震减灾取得的成效及其原因,指出了水利工程抗震安全工作的薄弱环节,强震监测工作在实际工程应用中存在的问题以及大坝强震安全监测中存在的模糊认识。利用计算机及网络技术,将信息远程传输和信息数据库管理的概念引入大坝强震监测技术领域,提出了大坝强震监测安全快速评价与决策支持系统的新思想,对系统的功能、基本原理、研究内容等宏观技术要点进行了论述,并指出了水利工程强震安全评价工作的发展方向。 相似文献
2.
如何用最少的测点反映水工建筑物的工作性态,是水工建筑物安全监测设计研究的难点。本文以水工建筑物有限元计算成果为依据,形成水工建筑物安全监测量的空间分布样本,通过聚类和主成分析,提取样本空间分布特征并对数据样本进行空间分块,由此提出水工建筑物安全监测布置的优化方法,并应用B样条曲面建模误差理论,对水工建筑物安全监测布置的结果进行评价。实例分析表明,该方法切实可行,为水工建筑物安全监测布置优化提供新思路。 相似文献
3.
地处地震活动区的水电厂对强震安全监测有着实际管理要求,但由于行业标准和管理体制等原因,地震台网监测系统与大坝安全监测系统间是各自独立运行的,难以实现强震发生时对大坝安全概貌进行即时监测与分析。文中论述了强震发生时大坝实时监测的必要性和可行性,并提出了基于可靠用户数据包协议(UDP)通信的强震监测系统对大坝测量系统实时触发的构想。最后,结合强震仪系统和大坝安全信息管理系统,给出了系统的设计实现,并在二滩水电厂得到了实际应用。实践表明,系统运行状况稳定可靠,具有一定工程有效性。 相似文献
4.
针对内蒙古呼和浩特抽水蓄能发电有限责任公司(以下简称呼蓄电站)大坝强震监测系统设备老化、性能下降、故障率高的问题,对其进行改造:将传感器、采集仪、供电线路、通信线路改造升级,并增加自动采集系统,将上下库的监测数据通过光缆汇集到厂房通信室,由1套强震监测软件实时处理监测数据。该系统可与大坝安全监测系统进行触发联动,能够在震后第一时间完成数据采集,既保证了安全监测数据的时效性,又保证了工作人员的人身安全,可满足大坝安全监测快速反馈和远程管理的要求,提升了管理效率。 相似文献
5.
对黄河上游李家峡水电站强震安全监测台阵布设的技术方案进行了详细阐述,内容包括场地的工程概况、台站场址的地址条件、台站的设计、仪器的性能指标及现场施工的具体情况、数据的采集分析等,可供其他大坝强震监测台阵设计时参考。 相似文献
6.
7.
8.
介绍了天荒坪抽水蓄能电站上水库、下水库、输水系统和厂防和开关站的布置和主要水工建筑物,详细阐述了上水库、下水库、输水系统、地下厂房洞群室和开关站等水工建筑物安全监测系统特点以及主要功能和技术参数 相似文献
9.
10.
水工建筑物在发电任务中的辅助地位,造成水电站项目管理人员对水工建筑物维护项目不够重视,管理不到位,影响着水电站机电设备的运行安全。文章从管理、工作、技术标准三方面论述了如何进行水工建筑物项目的标准化管理,以推进水工建筑物维护项目管理水平,促使水电站水工建筑物良性运行,为水电站的安全生产做好基础性保障。 相似文献
11.
12.
基于多Agent技术的分布式变电站远程视频监控系统研究 总被引:2,自引:0,他引:2
针对传统变电站多媒体监控系统在灵活性、可扩展性等方面的不足,引入智能Agent技术.建立了基于Multi-Agent的分布式多媒体监控系统模型。该模型将传统监控系统的功能划分入不同的Agent工作组,通过各Agent之间基于消息机制的通信与协作实现恶劣条件下视频流的鲁棒传输,并使系统具有感知性、主动性和自适应性。分析了系统结构与工作原理,给出了Agent的功能模型.并对模型中数据压缩组和错误控制组中所分别采用的自适应快速运动估计算法及精细运动矢量场差错掩盖算法进行了介绍。分析表明.该模型的视频压缩和传输策略可随系统结点数目和通信模式的变化而动态调整。 相似文献
13.
Consideration of Stretchable Dry Electrodes for Smart Shirts Aimed for Biological Signal Monitoring 下载免费PDF全文
YUSAKU AMANO YASUNORI TADA TOMONOBU SATO SHIGERU SAITO MASAHIRO INOUE 《Electrical Engineering in Japan》2018,203(4):63-71
Dry electrodes of a smart shirt for measuring biological signals were prepared by the additive printing method using a stretchable conductive paste with Ag fillers loading. Interfacial impedance between the electrode and skin depended on the contact pressure of electrode and the moisture of stratum corneum. When moisture of stratum corneum was more than 30%, ECG could be measured using the stretchable electrodes printed on a compression shirt. However, noise signal in the ECG signal increased when the moisture of stratum corneum was less than 30%. To solve this problem, we propose to use additional electrodes made of an electrically conductive kneaded rubber. 相似文献
14.
15.
This paper summarizes practical and developed techniques and technologies for energy saving in the industrial field. Newly developed high‐efficiency electrical equipment or combined technologies, which are about ‘power electronics’, ‘microcomputers’ and ‘motion control’ in addition to the progress of sensing devices and monitoring systems, bring both energy saving and high productivity in the factory. The technology trend of new factory facilities is concerned about changing power sources from pneumatic (compressed air) or hydraulic power (oil system) to electrical direct‐driven servomotor systems, which have the technical characteristics of fine‐grained and regenerative control. These technologies are able to reduce and recover idling (standby) power consumption during the holding period at the production stage in the factory. The items in this paper were published as Technical Report No. 988 in January 11, 2004 by IEEJ, and that report is reviewed and updated in this paper. Copyright © 2008 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc. 相似文献
16.
Sincethethirddecadeofthiscentury,alongsidethedevelopingofdambuildinginmanycountries,thedamprototypeobservationhasmadeacorrespondingprogress.Differentkindsofembeddedinstrumentsuchasstrainmeter,thermometer,weredevelopedtoverifythedesign.Thedisasterofsomefamousdamsin5O'sand6o'smadepeopletoputmuchmoreattentionstodamsafety,strengthenedthemoredirectandeffectivemonitoringitemsofdamsafety,suchasdeformation,leakage,piezometry,andnewobservationinstrumentsaspenduline,tensileline,upliftcellwereadopted.Sin… 相似文献
17.
在分析了镉镍电池特性的基础上提出一种微机监测系统,用以对电池的容量、电压、强放电及故障状况进行实时监测,以便运行人员根据具体情况及时处理,保证直流系统可靠地工作。 相似文献
18.
Takeshi Miura Takaaki Kaiga Takeshi Shibata Katsubumi Tajima Hideo Tamamoto 《IEEJ Transactions on Electrical and Electronic Engineering》2016,11(Z2):S140-S141
This paper proposes a method to adjust the physical constitution of a human body model used in motion capture data analysis. A physical constitution is adjusted so as to accurately classify motion capture data based on the difference in motion characteristics. The adjustment process is modeled as an optimization problem and solved numerically. Analysis results suggest the effectiveness of the proposed method and the point to which attention should be paid. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc. 相似文献