共查询到19条相似文献,搜索用时 43 毫秒
1.
磷酸酯功能单体对苯丙乳液及其水性涂料性能的影响 总被引:1,自引:0,他引:1
为考察磷酸酯表面活性剂的防锈性能及其对水性涂料性能的影响.对自制的普通苯丙乳液、功能苯丙乳液及其水性涂料进行了红外光谱、DSC、附着力、钙离子稳定性、防锈性和耐盐水性的分析。结果表明,磷酸酯共聚到聚合物乳液中形成了磷酸酯功能苯丙乳液;磷酸酯功能单体能显著提高功能性苯丙乳液乳胶膜对金属基材的附着力,功能乳液的防锈性能优于自制的普通苯丙乳液和目前市面上的专用防锈乳液的防锈性能,并可勺水性涂料中的防锈颜料复合磷酸锌发生协同作用,大大提高水性防锈涂料涂膜的防锈性能。 相似文献
2.
环氧改性含磷苯丙防锈乳液的合成 总被引:3,自引:0,他引:3
采用常规乳液聚合方法,以环氧树脂改性含有磷酸酯功能单体的苯丙乳液来制备水性防锈乳液。苯乙烯(St)、丙烯酸丁酯(BA)等为共聚单体,引入环氧树脂及具有抗闪蚀功能的磷酸酯功能单体,考察了乳化剂、引发剂、环氧树脂、磷酸酯单体不同用量对乳液及其漆膜的影响,并对乳液的粒径、固含量及漆膜的耐盐水性、附着力等性能进行测试,逐步优化聚合工艺来合成具有高效防锈的新型环氧防锈乳液。研究表明,乳化剂用量、引发剂用量、环氧树脂用量、磷酸酯单体用量分别为单体总量的1.5%、0.6%、7%、3%时,可制得性能较好的水性环氧改性含磷苯丙防锈乳液。 相似文献
3.
采用原位无皂乳液聚合法,以改性纳米二氧化硅粒子为反应活性中心,取代传统乳液聚合中的乳化剂,以磷酸酯为功能单体合成了纳米二氧化硅/聚丙烯酸酯复合防锈乳液。结果表明:所制备的乳液反应体系稳定,乳液粒径约为100 nm,当纳米二氧化硅用量为主单体质量的4%~6%,磷酸酯功能单体用量为主单体质量的2%~4%时,乳液综合性能最佳。以该乳液为基料制备的水性防锈涂料防锈性能优异,经240 h耐盐雾试验测试,钢板表面无泡无锈蚀产生。 相似文献
4.
5.
合成了一种磷酸酯改性的丙烯酸酯乳液,并对其性能进行了研究。探讨了磷酸酯单体的加量与加入方式对乳液的凝胶率、钙离子稳定性、附着力以及抗闪蚀性的影响,并对成膜物进行了耐盐水性能的测试。结果表明:当选用单官能团的磷酸酯的单体时,乳液的凝胶率较低,当磷酸酯单体加入量为4%,且全部在乳液聚合的壳聚合阶段加入时,乳液的钙离子稳定性佳,成膜物的干态附着力和湿态附着力均达到1级,涂膜无闪蚀现象,与普通乳液相比,防腐蚀性能获得明显的提高。 相似文献
6.
7.
水性含氟耐候防锈涂料的制备及应用 总被引:1,自引:0,他引:1
采用核壳乳液聚合法,并加入磷酸酯功能单体(PAM-100),制备了氟单体用量为5%的含氟丙烯酸酯聚合物乳液。分析了含氟单体、乳化剂、磷酸酯功能单体等因素对乳液合成的影响。用合成的乳液配制了水性防锈涂料,并对其性能进行测试。 相似文献
8.
磷酸酯PAM-200接枝改性水性环氧树脂的制备与性能研究 总被引:2,自引:0,他引:2
以环氧树脂为母体,甲基丙烯酸、丙烯酸丁酯、苯乙烯为接枝单体,磷酸酯PAM-200为功能单体,通过自由基共聚制备了改性水性环氧树脂乳液,研究了磷酸酯单体用量对乳液及其涂膜性能的影响。结果表明:磷酸酯PAM-200引入水性环氧-丙烯酸体系后,提高了乳液涂膜在金属基材上的附着力,并且可以改善涂膜的成膜性能。 相似文献
9.
以丙烯酸丁酯(BA)、苯乙烯(St)、甲基丙烯酸甲酯(MMA)为主单体,甲基丙烯酸缩水甘油酯、衣康酸单丁酯、N-羟甲基丙烯酰胺为交联单体,磷酸酯PAM-100为功能单体,硅烷偶联剂KH-570为改性剂合成了防锈苯丙乳液。研究了乳化剂的选择以及用量、软硬单体比例、磷酸酯的用量及加入方式、有机硅的添加量对乳液及涂膜性能的影响。结果表明,n(BA)∶n(St+MMA)=1∶1.75,SR~10/DNS-458为乳化剂,用量为单体质量分数的0.8%~1.0%,延后方式滴加质量分数3%的磷酸酯,KH-570质量分数1%时,乳液性能稳定,凝胶率小,涂膜硬度和耐水性良好,3%的中性盐水中浸泡360 h,漆膜无明显起泡生锈现象,与普通商品苯丙乳液相比,具有优异的防锈性能。 相似文献
10.
以甲基丙烯酸甲酯、丙烯酸丁酯、苯乙烯、丙烯腈、甲基丙烯酸三氟乙酯、磷酸酯(PP-70)为单体合成了含氟丙烯酸酯防锈乳液。通过对粒径、凝聚率、吸水率、附着力、转化率等性能分析,确定了使用烯丙氧基脂肪醇聚氧乙烯醚硫酸铵(SR-10)与烯丙基酚聚氧乙烯醚(RN-30)为反应型乳化剂,质量比为2∶1,用量为单体总量的2%~3%(质量分数),甲基丙烯酸甲酯与苯乙烯质量比为1∶1,磷酸酯功能单体(PP-70)用量为单体总量的3%(质量分数),甲基丙烯酸三氟乙酯用量为单体总量的30%(质量分数)时,乳液及其涂膜有较好的综合性能。 相似文献
11.
12.
The effect of the addition of a phosphoric acid group containing monomer on polymerization kinetics, copolymer microstructure and end-use properties of a latex prepared by seeded emulsion polymerization of MMA/BA/MAA/AAEMA/SIPOMER PAM100 was studied. It was found that despite of the surface activity of the phosphated monomer, the polymerization kinetics was not affected. Gel content increased with the concentration of phosphate monomer due mainly to the presence of divinyl ester phospate impurities. Gel improved the chemical resistance of the latex films. However, the most affected property was adhesion. Increasing amounts of the phosphated monomer led to a strong enhancement of the adhesion due to chemical interactions established with the metal surface. It was also found that the feeding strategy of the phosphated monomer played an important role in the adhesion enhancement. Latexes synthesized using a delayed addition of the phosphate monomer showed better performance than latexes prepared following a conventional addition strategy. The latexes synthesized during the investigation were evaluated as binders in a primer formulation. A primer with good adhesive and corrosion resistance properties was achieved using a 5 wt.% of the phosphated monomer. 相似文献
13.
14.
聚醋酸乙烯酯/纳米SiO_2复合乳液的制备与性能 总被引:7,自引:0,他引:7
采用原位乳液聚合法制备了聚醋酸乙烯酯/纳米二氧化硅复合乳液。考察了纳米二氧化硅在聚醋 酸乙烯酯乳液内及乳胶膜中的分散性:纳米二氧化硅用量对复合乳液性能的影响。结果表明:与普通乳液相 比,复合乳液的干态粘接强度和耐水性明显提高。 相似文献
15.
纳米Si02改性丙烯酸酯乳液的工艺研究 总被引:2,自引:0,他引:2
采用水溶性环氧树脂对纳米SiO2进行化学改性,有效改善了纳米SiO2的表面性能。通过原位聚合法和共混法制备纳米SiO2/聚丙烯酸酯复合乳液,发现纳米SiO2的加入明显改善了涂膜的硬度、附着力、拉伸强度和耐候性,原位聚合法制备的复合乳液综合性能优于共混法。 相似文献
16.
以甲基丙烯酸酯基烷氧基磷酸酯(PAM-100)、甲基丙烯酸甲酯、丙烯酸丁酯、丙烯酸等为单体,采用预乳化半连续乳液聚合法制备了含磷丙烯酸酯共聚乳液。研究了PAM-100用量对单体转化率、乳液稳定性和乳胶粒粒径及分布的影响,并通过红外光谱(FT-IR)和微型燃烧量热分析(MCC)对乳胶膜的结构及性能进行表征。结果表明:PAM-100的加入有利于提高乳液聚合的稳定性及乳胶膜阻燃性能。与纯丙乳液相比,当PAM-100用量为10wt%时,含磷丙烯酸酯共聚乳液的乳胶粒表面Zeta电位绝对值由34.6mV提高至41.3mV,粒径由169nm下降至132nm;同时,含磷丙烯酸酯乳胶膜热释放速率峰值(pHRR)由391.1W/g下降至333.3W/g,到达pHRR的时间由264s推迟至300s。 相似文献
17.
Synthesis of a latex with bimodal particle size distribution for coating applications using acrylic monomers 总被引:2,自引:0,他引:2
Saeed Houshmand Moayed Shohreh Fatemi Saeed Pourmahdian 《Progress in Organic Coatings》2007,60(4):312-319
Multipart emulsion polymerization of methyl methacrylate (MMA) and butyl acrylate (BA) was carried out in this work. The target was to achieve stability during the polymerization and to determine the proper hydrophilic–lipophilic balance (HLB) value for the stable system, using different types of non-ionic emulsifiers, sodium lauryl sulphate and their combinations. After determination of proper value of HLB (36.2), the best emulsifier combination on the basis of minimization of coagulum level was determined. This combination was 20 wt.% of KENON30 to SLS. The effect of monomer feed composition on the dry latex film properties was investigated to approach a monomer feed composition dealt with a proper Tg. The prepared latex showed a bimodal particle size distribution, due to the proper feeding policy in semibatch emulsion copolymerization process. The monomer feed composition of 45 wt.% MMA and 55 wt.% BA with a proper Tg was selected for the final improvement of coating properties such as UV resistance and adhesion. Adding acrylic acid (AA) and N-methylol acrylamide (NMA) to the reaction mixture improved the UV resistance and adhesion property of dry latex film. The flow and leveling, gloss, adhesion, UV resistance and water resistance of the produced bimodal latex showed good quality in comparison with the similar commercial resins used in coating applications. 相似文献
18.
醋酸乙烯酯—丙烯酸丁酯共聚乳液的合成研究 总被引:1,自引:0,他引:1
采用半连续法和间歇法合成了醋酸乙烯酯、丙烯酸丁酯共聚乳液。通过对不同聚合方法合成的乳液胶膜性能的研究,表明半速续法合成的乳液腹膜性能优于间歇法并讨论了其原因。采用半连续法合成不同单体配比的共聚乳液,研究结果表明,胶膜的耐水性、初始粘接强度等性能随丙烯酸丁酯含量的增加而提高。 相似文献