用C#开发基于Microsoft Speech SDK的语音应用程序

对Microsoft Speech SDK5．1语音控制编程接口SAPI进行了分析，详细描述用C#语言结合这些接口开发语音应用程序的流程步骤，并最终以实例程序展示了共享型语音控制程序的开发流程。     

基于Speech SDK的语音控制应用程序的设计与实现

分析了微软Speech SDK5．1里语音应用程序接口(SAPI)的结构和工作原理，提出了语音控制应用程序的设计方法，并以“Z Z智能教学平台的语音识别接口”的设计为例，展示了这类系统的主框架和关键技术。     

让应用程序听懂你的话--一个简单的语音应用程序

Microsoft公司最近推出了一套全新的语音识别系统Microsoft Speech API5．0。该系统采用了COM体系结构,全面支持中文语音的输入和合成。本文将主要介绍SAPI5．0的主要体系结构,并通过一个简单的语音应用程序介绍SAPI5．0的实现方法。     

用Delphi实现基于SAPI的电脑语音控制应用程序

介绍了语音功能的基本概念,讨论了开发具有语音控制功能应用程序的条件和步骤。并用Delphi实现了一个基于微软SAPI的语音控制应用程序,此程序可以用方便的扩展以实现更多语音控制功能。     

.NET平台下中文语音合成技术的研究与实践

该文介绍了SAPI SDK语音开发包的用途和使用方法,结合作者的实际工作,梳理了语音开发平台的概念及应用技巧,实现了基于．NET平台的语音应用程序开发,并将这一技术应用于开放实验室管理。     

基于WINCE的语音识别系统

论文在基于Intel PXA270嵌入式微处理器开发平台上实现了WinCE操作系统的定制和移植;并结合WINCE5．0语音接口Speech Applicafion Programming Interface（SAPI 5．0）,使用Embedded Visualc＋＋4．0（EVC）成功开发嵌入式语音识别系统。     

基于TTS技术的人力资源考勤系统的开发

在考勤系统中引入了TTS技术,调用WindowsXP系统自带的SAPI接口,使系统具有中文语音播报考勤结果的功能,该项技术的应用,提高考勤效率,增加了员工的有效工时,消除了上下班高峰期时的考勤拥堵现象。     

采用Windows SAPI实现高效的串行通信

着重介绍了在Windows95环境下采用SAPI实现串行通信和调用SAPI生成动态链接库(DLL)的方法和步骤 ,并给出了VB应用程序调用底层DLL的通信实例。     

基于WINCE的语音识别系统

随着移动设备的快速发展,使得语音识别系统大量地从实验室的PC平台转移到嵌入式设备中。将嵌入式语音识别与现有的嵌入式平台的各种应用软件相结合,能够使现有的各种应用软件(包括操作系统)增添便利的人机交互的语音界面。论文在基于Intel PXA270嵌入式微处理器开发平台上实现了WinCE操作系统的定制和移植;并结合WINCE5.0语音接口Speech Application Programming Interface(SAPI5.0),使用Embedded Visual C++4.0(EVC)成功开发嵌入式语音识别系统。     

用SAPI 5实现中文语音音素的分解

本文讲述了在基于网络的人-人交互系统中,如何利用SAPI5来进行中文语音音素的分解,介绍了SAPI5语音识别(SR)引擎所提供的服务,在一个已经实现的MPEG-4兼容的人脸动画系统基础上,阐述了其在网络人-人交互系统应用中的设计思路和具体相关实现技术.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

基于AD9626的模拟信号采集存储卡设计

自然界的绝大部分信号都是以模拟的形式存在,因此模拟信号的采集转换存储在数字时代十分关键。文章讨论了在雷达信号处理领域基于AD9626的AD采集存储卡的设计原理、硬件结构和程序设计与芯片配置等问题,为今后相关领域的研究提供了可参考的方案。     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

A human-computer interface for non-computer specialists

The COM teleconferencing system was designed to be easy to use for both beginners and people with much computer experience. A number of design choices in organizing the human-computer interface were considered very carefully. These design problems are not unique for teleconferencing applications, but will appear in many other developments of human-computer interfaces for non-computer specialists. This report discusses naming conventions, menu format, user commands, help facility and the treatment of ‘type ahead’ from the users.