Novel Broadband Excited and Linear Red‐Emitting Ba2Y(BO3)2Cl: Ce3+, Tb3+, Eu3+ Phosphor: Luminescence and Energy Transfer

A series of Ce³⁺, Tb³⁺, Eu³⁺ tri‐doped Ba₂Y(BO₃)₂Cl red‐emitting phosphor have been synthesized by solid‐state method. The Ce³⁺→Tb³⁺→Eu³⁺ energy‐transfer scheme has been proposed to realize the sensitization of Eu³⁺ ion emission by Ce³⁺ ions. Following this energy‐transfer model, near‐UV convertible Eu³⁺‐activated red phosphors have been obtained in Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ phosphors. Energy transfers from Ce³⁺ to Tb³⁺, and Tb³⁺ to Eu³⁺, as well as corresponding energy‐transfer efficiencies are investigated. The combination of narrow‐line red emission and near‐UV broadband excitation makes Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ as a novel and efficient red phosphor for NUV LED applications.     

Luminescence properties and energy transfer of GdAl3(BO3)4:Ce3+, Tb3+ phosphor

Ce³⁺ and Tb³⁺ singly doped and co-doped GdAl₃(BO₃)₄ phosphors were synthesized by solid state reaction. The crystal structure, the luminescent properties, the lifetimes and the temperature-dependent luminescence characteristic of the phosphors were investigated. Through an effective energy transfer, the emission spectra of GdAl₃(BO₃)₄:Ce³⁺, Tb³⁺ phosphor contains both a broad band in the range of 330–400 nm originated from Ce³⁺ ions and a series of sharp peaks at 484, 541, 583, and 623 nm due to Tb³⁺ ions. The energy transfer from Ce³⁺ to Tb³⁺ in GdAl₃(BO₃)₄ host is demonstrated to be phonon assisted nonradiative energy transfer via a dipole–dipole interaction.     

Novel Emitting‐Color Tunable Phosphors Ba3Y2(BO3)4:Ce3+,Tb3+ with Efficient Energy Transfer for Near‐UV Light‐Emitting Diodes

This work presents the ultraviolet–visible spectroscopic properties of Ba₃Y₂(BO₃)₄:Ce³⁺,Tb³⁺ phosphors prepared by a high‐temperature solid‐state reaction. Under ultraviolet light excitation, tunable emission from the blue to yellowish‐green region was obtained by changing the doping concentration of Tb³⁺ when the content of Ce³⁺ is fixed. The efficient energy transfer process between Ce³⁺ and Tb³⁺ ions was observed and confirmed in terms of corresponding excitation and emission spectra. In addition, the energy transfer mechanism between Ce³⁺ and Tb³⁺ was proved to be dipole–dipole interaction in Ba₃Y₂(BO₃)₄:Ce³⁺,Tb³⁺ phosphor. By utilizing the principle of energy transfer and appropriate tuning of Ce³⁺/Tb³⁺ contents, Ba₃Y(BO₃)₄:Ce³⁺,Tb³⁺ phosphors can have potential application as an UV‐convertible phosphor for near‐UV excited white light‐emitting diodes.     

Multicolour tunable luminescence of thermal-stable Ce3+/Tb3+/Eu3+-triactivated Ca3Gd(GaO)3(BO3)4 phosphors via Ce3+ → Tb3+ → Eu3+ energy transfer for near-UV WLEDs applications

A series of single-component blue, green and red phosphors have been fabricated based on the Ca₃Gd(GaO)₃(BO₃)₄ host through doping of the Ce³⁺/Tb³⁺/Eu³⁺ ions, and their crystal structure and photoluminescence properties have been discussed in detail. A terbium bridge model via Ce³⁺ → Tb³⁺ → Eu³⁺ energy transfer has been studied. The emission colours of the phosphors can be tuned from blue (0.1661, 0.0686) to green (0.3263, 0.4791) and eventually to red (0.5284, 0.4040) under a single 344 nm UV excitation as the result of the Ce³⁺ → Tb³⁺ → Eu³⁺ energy transfer. The energy transfer mechanisms of Ce³⁺ → Tb³⁺ and Tb³⁺ → Eu³⁺ were found to be dipole-dipole interactions. Importantly, Ca₃Gd(GaO)₃(BO₃)_4:Ce³⁺,Tb³⁺,Eu³⁺ phosphors had high internal quantum efficiency. Moreover, the study on the temperature-dependent emission spectra revealed that the Ca₃Gd(GaO)₃(BO₃)_4:Ce³⁺,Tb³⁺,Eu³⁺ phosphors possessed good thermal stability. The above results indicate that the phosphors can be applied into white light-emitting diodes as single-component multi-colour phosphors.     

Crystal structure,luminescent properties and white light emitting diode application of Ba3GdNa(PO4)3F:Eu2+ single-phase white light-emitting phosphor

A series of single-phase white-light-emitting phosphors, Eu²⁺-activated Ba₃GdNa(PO₄)₃F phosphors were synthesized by solid-state reactions. The crystal structure of Ba₃GdNa(PO₄)₃F was been identified by Rietveld refinement of X-ray diffraction pattern. The Eu²⁺-activated Ba₃GdNa(PO₄)₃F phosphors exhibit broad excitation spectra from 250 to 420 nm, which matched well with the n-UV LED chips. Under the excitation of 365 nm, the emission spectrum almost covered the entire visible region including two emission bands peaked at 472 nm and 640 nm. Three different Eu²⁺ emission centers in Ba₃GdNa(PO₄)₃F:Eu²⁺ phosphor were confirmed by their fluorescence decay lifetimes. The optimal concentration of Eu²⁺ in Ba₃GdNa(PO₄)₃F:xEu²⁺ was 3 mol% and the corresponding concentration quenching mechanism was verified to be exchange coupling interaction. Furthermore, the white light-emitting diode fabricated with Ba₃GdNa(PO₄)₃F:0.05Eu²⁺ phosphor and a 370 nm UV chip has a CIE of (0.3267, 0.2976) with a color-rendering index of 78.4 at the CCT of 5287 K.     

Luminescence properties and energy transfer investigations of Sr2B2O5:Ce3+,Tb3+ phosphors

Ce³⁺ and Tb³⁺ co-doped Sr₂B₂O₅ phosphors were synthesized by the solid-state method. X-ray diffraction (XRD) was used to characterize the phase structure. The luminescent properties of Ce³⁺ and Tb³⁺ co-doped Sr₂B₂O₅ phosphors were investigated by using the photoluminescence emission, excitation spectra and reflectance spectra, respectively. The excitation spectra indicate that this phosphor can be effectively excited by near ultraviolet (n-UV) light of 317 nm. Under the excitation of 317 nm, Sr₂B₂O₅:Ce³⁺,Tb³⁺ phosphors exhibited blue emission corresponding to the f–d transition of Ce³⁺ ions and green emission bands corresponding to the f–f transition of Tb³⁺ ions, respectively. The Reflectance spectra of the Sr₂B₂O₅:Ce³⁺,Tb³⁺ phosphors are noted that combine with Ce³⁺ and Tb³⁺ ion absorptions. Effective energy transfer occurred from Ce³⁺ to Tb³⁺ in Sr₂B₂O₅ host due to the observed spectra overlap between the emission spectrum of Ce³⁺ ion and the excitation spectrum of Tb³⁺ ion. The energy transfer efficiency from Ce³⁺ ion to Tb³⁺ ion was also calculated to be 90%. The phosphor Sr₂B₂O₅:Ce³⁺,Tb³⁺ could be considered as one of double emission phosphor for n-UV excited white light emitting diodes.     

Red,green and blue-violet emission coexistence in white-light-emitting Ca3SiO4Cl2:Bi3+, Li+, Eu2+, Eu3+ phosphor

A series of emission-tunable Ca₃SiO₄Cl₂:Bi³⁺, Li⁺, Euⁿ⁺(n =2, 3) (CSC:Bi³⁺, Li⁺, Euⁿ⁺) phosphors have been synthesized via sol-gel method. The X-ray diffraction results indicate that the as-synthesized phosphors crystallize in a low temperature phase with the space group of P21/c. Energy transfer from Bi³⁺ to Eu³⁺/Eu²⁺ exists in CSC:Bi³⁺, Li⁺, Euⁿ⁺ phosphors. Under the excitation of 327 or 365 nm, the Ca_2.98−ySiO₄Cl₂:0.01Bi³⁺, 0.01Li⁺, yEuⁿ⁺(y=0.0001–0.002) phosphors show an intense green emission band around 505 nm, while under the excitation of 264 nm, three emission bands centered around 396 nm (Bi³⁺), 505 nm (Eu²⁺) and 614 nm (Eu³⁺) are observed and tunable colors from blue-violet to green or white are achieved in these phosphors by varying the content of Eu. White-light emission with the color coordinate (0.312, 0.328) is obtained in Ca_2.978SiO₄Cl₂:0.01Bi³⁺, 0.01Li⁺, 0.002Euⁿ⁺(n =2, 3). Based on these results, the as-prepared CSC:Bi³⁺, Li⁺, Eu²⁺, Eu³⁺ phosphors can act as color-tunable and single-phase white emission phosphors for potential applications in UV-excited white LEDs.     

NaBaY(BO3)2:Ce3+,Tb3+: A novel sharp green‐emitting phosphor used for WLED and FEDs

A new borate phosphor NaBaY(BO₃)₂: Ce³⁺, Tb³⁺ (NBY:Ce³⁺, Tb³⁺) was successfully synthesized under low temperature designed to put into application in the fields of ultraviolet (UV)‐excited light emitting diodes (LEDs) and field emission displays (FEDs). The structure distortion between Ce³⁺, Tb³⁺ single‐ and co‐doping NBY was discussed by X‐ray powder diffraction Rietveld refinement, high‐resolution transmission electron microscopy (HRTEM) and spectra. NBY: Ce³⁺, Tb³⁺ presents a wide absorption band ranging from 310 to 400 nm and efficient green emission (λ_max = 542 nm) with a full‐width at half‐maximum of 3.3 nm. The remarkable thermal stability has also been tested, indicating that the intensity at 200°C is still beyond 70% of the original intensity. In addition, a white LED device was manufactured by connecting a 370 nm UV chip with a blend of BaMaAl₁₀O₁₇: Eu²⁺ (BAM: Eu²⁺), NBY: Ce³⁺, Tb³⁺ and CaAlSiN₃: Eu²⁺. The color coordinate, correlated color temperature and color rendering index of the manufactured LED device were (0.335, 0.347), 5511 K and 80.16, respectively. Meanwhile, the cathodoluminescence (CL) spectra under the various conditions of probe currents and accelerating voltages were also analyzed. Through successive excitation of low‐voltage electron‐beam, the wonderful performances of degradation property and color stability were obtained. These results suggest that the green‐emitting NBY: Ce³⁺, Tb³⁺ phosphor has the prospect of becoming applications in white UV LEDs and FEDs.     

Near-UV light excited Eu3+, Tb3+, Bi3+ co-doped LaPO4 phosphors: Synthesis and enhancement of red emission for WLEDs

A series of single-phase Eu³⁺, Tb³⁺, Bi³⁺ co-doped LaPO₄ phosphors were synthesized by solid-state reaction at 800 °C. Crystal structures of the phosphors were investigated by X-ray diffraction (XRD). A monoclinic phase was confirmed. The excitation (PLE) and emission (PL) spectra showed that the phosphors could emit red light centered at 591 nm under the 392 nm excitation, which is in good agreement with the emission wavelength from near-ultraviolet (n-UV) LED chip (370–410 nm). The results of PLE and PL indicated that the co-doped Tb³⁺ and Bi³⁺could enhance emission of Eu³⁺ and the fluorescent intensities of the phosphors excited at 392 nm could reach to a maximum value when the doping molar concentration of Tb³⁺ and Bi³⁺ is about 2.0% and 2.0%, respectively. The co-doping Tb³⁺ and Bi³⁺ ions can strengthen the absorption of near UV region. They can also be efficient to sensitize the emission of Eu³⁺, indicating that the energy transfer occurs from Tb³⁺ and Bi³⁺ to Eu³⁺ ions. From further investigation it can be found that co-doping Tb³⁺ and Bi³⁺ ions can also induce excitation energy reassignment between ⁵D₀–⁷F₁ and ⁵D₀–⁷F₂ in these phosphors, and result in more energy assignment to ⁵D₀–⁷F₂ emission in LaPO₄:Eu³⁺, Tb³⁺, Bi³⁺. Our research results displayed that La_0.94PO₄:Eu³⁺_0.02, Tb³⁺_0.02, Bi³⁺_0.02 could be a new one and could provide a potential red-emitting phosphor for UV-based white LED.     

A novel tunable green-to-red emitting phosphor Ca4LaO(BO3)3:Tb,Eu via energy transfer with high quantum yield

A novel green phosphor composed of Ca₄LaO(BO₃)₃:Tb³⁺ (CLBO:Tb) has been synthesized by a combustion method with urea. Its crystal structure, temperature-dependent luminescence, and quantum yield (QY) have been characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectra with heating device and integrate sphere. No concentration quenching has been observed when all of La³⁺ ions are substituted with Tb³⁺ ions. Green phosphor Ca₄TbO(BO₃)₃ (CTBO) has 200% luminescence intensity of commercially available phosphor LaPO₄:Ce, Tb (LPO:Ce, Tb) under 378 nm excitation. The QY of CTBO is as high as 98%. Through a Dexter energy transfer mechanism, Eu³⁺ ions are efficiently sensitized by Tb³⁺, resulting in an emission with color tunable from green to red under ultraviolet excitation. A possible mechanism of energy transfer from Tb³⁺ to Eu³⁺ has been investigated by PL spectra and decay measurements. The energy transfer efficiency from Tb³⁺ to Eu³⁺ increases linearly with concentration of Eu³⁺ increasing.     

Preparation and properties of CdSiO3: Mn2+, Tb3+ phosphor

CdSiO₃: Mn²⁺, Tb³⁺ long-lasting phosphor was prepared by the conventional high temperature solid-state method. Effects of the content of Mn²⁺ and Tb³⁺ on the luminescent properties of phosphor CdSiO₃: Mn²⁺, Tb³⁺ were investigated by means of photoluminescence (PL) spectra, the afterglow intensity decay curves and the thermoluminescence (TL) spectra. It was found that when the Mn²⁺ and Tb³⁺ dopant-concentrations were 0.4 mol% and 0.8 mol% of Cd²⁺ ions in CdSiO₃, respectively, the luminescence of phosphor prepared had better luminescent property and longer afterglow time. Role of Tb³⁺ co-doped into CdSiO₃: Mn²⁺ matrix was discussed in this paper.     

Luminescence and structural properties of Gd2SiO5:Eu3+ phosphors synthesized from the modified solid state method

This paper reports the preparation of Eu³⁺ doped Gadolinium oxyorthosilicate (Gd₂SiO₅:Eu³⁺) phosphor with different concentration of Eu³⁺(0.1–2.5 mol%) using the modified solid state reaction method. The synthesis procedure of the Gd₂SiO₅:Eu³⁺phosphor using inorganic materials such as Gd₂O₃, silicon dioxide (SiO₂), europium oxide (Eu₂O₃) and boric acid (H₃BO₃) as flux is discussed in detail. The prepared phosphor samples were characterized by using X-Ray Diffraction (XRD), Field Emission Gun Scanning Electron Microscopy (FEGSEM), Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), Photoluminescence (PL) and Thermoluminescence (TL). The Commission Internationale de l′Eclairage(CIE) coordinates were also calculated. The PL emission was observed in the 350–630 nm range for the Gd₂SiO₅:Eu³⁺ phosphor. PL excitation peaks were observed at 266, 275, 312 and 395 nm while the emission peaks were observed at 380, 416, 437, 545, 579, 589, 607, 615 and 628 nm. The emission peak at 615 nm was the most intense peak for all the different Eu³⁺ concentration samples. From the XRD data, using the Scherrer's formula, the average crystallite size of the Gd₂SiO₅:Eu³⁺ phosphor was calculated to be 33 nm. TL was carried out for the phosphor after both UV and gamma irradiation. The TL response of the Gd₂SiO₅:Eu³⁺ phosphor for the two different radiations was compared and studied in detail. It was found that the present phosphor can acts as a single host for red emission (1.5 mol%) for display devices and light emitting diode (LED) and white light emission for Eu³⁺(0.1 mol%) and it might be used as a TL dosimetric material for gamma dose detection.     

Warm with high color rendering index white light from hybridization of Ca2BO3Cl:Eu2+ yellow phosphor and CdSe/ZnS nanocrystals

Yellow emitting Ca₂BO₃Cl:Eu²⁺ phosphor was prepared by solid state reaction at 900 °C. The particle was monoclinic crystal structure, and showed broad band emission at around 540–590 nm due to the 5d–4f transition. Single Ca₂BO₃Cl:Eu²⁺ phosphor converted white LED exhibited the CIE coordinates of (0.3441, 0.2675) with low CRI of 67.4. Hybridization of Ca₂BO₃Cl:Eu²⁺ with 535 and 610 nm emitting CdSe/ZnS nanocrystals contributed to increasing white spectrum and generated the warm color temperature (4055 K) with high CRI (83.9) of white light. The acceptable color stability was also observed from (0.3687, 0.3051) at 20 mA to (0.3645, 0.3101) at 80 mA.     

Improved photoluminescence,thermal stability and temperature sensing performances of K+ incorporated perovskite BaTiO3:Eu3+ red emitting phosphors

K⁺ ions incorporated perovskite Ba_(1−x)TiO₃:x Eu³⁺ red emitting phosphors synthesized via facile solid -state reaction method has been investigated in the current study. The photoluminescence and decay time behavior of Ba_(1−x−y)TiO₃:x Eu³⁺,yK⁺ phosphors are investigated as a function of Eu³⁺, K⁺ concentration and temperature. An intense and sharp emission peak at 615 nm was exhibited by the phosphors upon excitation at 397 nm (⁷F₀→⁵L₆). It can be credited to the hypersensitive electric dipole transition ⁵D₀→⁷F₂, which confirms that Eu³⁺ ions are located at non-centrosymmetric site of the host. The incorporation of K⁺ ions in optimized Ba_0.95TiO₃:0.05 Eu³⁺ phosphor resulted in a remarkable enhancement of photoluminescence intensity by 2.33 times as compared to bare one. The Ba_0.89TiO₃:0.05 Eu³⁺, 0.06 K⁺ phosphors were found to observe good temperature sensing along with adequate thermal stability even at 427 K. Furthermore, the photometric parameters have been also studied which are strongly facilitate the prepared ceramic samples as suitable for potential application in lighting.     

Combustion synthesis of borate phosphors for use in plasma display panels and mercury-free fluorescent lamps

Discussed are the photoluminescence properties of combustion synthesized red and green emitting borate phosphors—YBO₃ : Eu³⁺, BaZr(BO₃)₂ : Eu³⁺, YCaBO₄ : Eu³⁺, YAl₃(BO₃)₄ : Eu³⁺, YAl₃(BO₃)₄ : Tb³⁺, LaBaB₉O₁₆ : Tb³⁺, LaBaB₉O₁₆ : (Ce³⁺,Tb³⁺), and Na₃La₂(BO₃)₃ : Tb³⁺-promising for use in plasma display panels and mercury-free fluorescent lamps.     

Energy transfer and multicolor tunable emission in single-phase Tb3+, Eu3+ co-doped Sr3La(PO4)3 phosphors

A series of green-to-red color-tunable Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ phosphors were prepared by high temperature solid-state method. The crystal structures, photoluminescence properties, fluorescence lifetimes, and energy transfer of Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ were systematically investigated in detail. The obtained phosphors show both a green emission from Tb³⁺ and a red emission from Eu³⁺ with considerable intensity under ultraviolet (UV) excitation (~377 nm). The emission colors of the phosphors can be tuned from green (0.304, 0.589) through yellow (0.401, 0.505) and eventually to red (0.557, 0.392) due to efficient Tb³⁺-Eu³⁺ energy transfer (ET). The Tb³⁺→Eu³⁺ energy transfer process was demonstrated to be quadrupole-quadrupole mechanism by Inokuti-Hirayama model, with maximum ET efficiency of 86.3%. The results indicate that the Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ phosphors might find potential applications in the field of lighting and displays.     

White‐emitting phosphor Ba2B2O5:Ce3+, Tb3+, Sm3+: Luminescence,energy transfer,and thermal stability

A series of Ba₂B₂O₅: RE (RE=Ce³⁺/Tb³⁺/Sm³⁺) phosphors were synthesized using high‐temperature solid‐state reaction. The X‐ray diffraction (XRD), luminescent properties, and decay lifetimes are utilized to characterize the properties of the phosphors. The obtained phosphors can emit blue, green, and orange‐red light when single‐doped Ce³⁺, Tb³⁺, and Sm³⁺. The energy can transfer from Ce³⁺ to Tb³⁺ and Tb³⁺ to Sm³⁺ in Ba₂B₂O₅, but not from Ce³⁺ to Sm³⁺ in Ce³⁺ and Sm³⁺ codoped in Ba₂B₂O₅. However, the energy can transfer from Ce³⁺ to Sm³⁺ through the bridge role of Tb³⁺. We obtain white emission based on energy transfer of Ce³⁺→Tb³⁺→Sm³⁺ ions. These results reveal that Ce³⁺/Tb³⁺/Sm³⁺ can interact with each other in Ba₂B₂O₅, and Ba₂B₂O₅ may be a potential candidate host for white‐light‐emitting phosphors.     

Warm white-light generation in Ca9MgNa(PO4)7:Sr2+, Mn2+, Ln (Ln=Eu2+, Yb3+, Er3+, Ho3+, and Tm3+) under near-ultraviolet and near-infrared excitation

To obtain warm white-light emission, a series of Ca₉MgNa(PO₄)₇:Sr²⁺, Mn²⁺, Ln (Ln=Eu²⁺, Yb³⁺, Er³⁺, Ho³⁺, and Tm³⁺) phosphors were designed and their photoluminescence properties under near-ultraviolet and near-infrared excitation were studied. For near-ultraviolet excitation, blue-white emission is produced initially in the Eu²⁺ single-doped Ca₉MgNa(PO₄)₇, whose excitation band can well match with the near ultraviolet LED chip. By introducing Sr²⁺ ions into Ca₉MgNa(PO₄)₇:Eu²⁺, the Eu²⁺ emission band beyond 500 nm is enhanced obviously. Correspondingly, the emitting light color is tuned to nearly white. To generate warm white light further, Mn²⁺ is doped into the Ca_8.055MgNa(PO₄)₇:0.045Eu²⁺, 0.9Sr²⁺ and the correlated color temperature is decreased largely. For near-infrared excitation, the green, red, and blue emissions have been obtained in the Yb³⁺-Er³⁺, Yb³⁺-Er³⁺, and Yb³⁺-Er³⁺ co-doped Ca₉MgNa(PO₄)₇ phosphors, respectively. And warm white light is also produced in the Ca₉MgNa(PO₄)₇:Yb³⁺, Er³⁺, Ho³⁺, Tm³⁺ under 980 nm excitation.     

Broadband excited Na3Tb(PO4)2:Ce3+/Eu2+ green/yellow-emitting phosphors with high color purity for LED-based application

To enhance the display quality of light-emitting diodes (LEDs), it is of great significance to exploit green/yellow-emitting phosphors with narrow emission band, high quantum yield, and excellent color purity to satisfy the application. Herein, orthophosphate-based green/yellow-emitting Na₃Tb(PO₄)₂:Ce³⁺/Eu²⁺ (NTPO:Ce³⁺/Eu²⁺) phosphors have been successfully synthesized by a facile solid-state reaction method. The absorption band of NTPO samples was extended to the near-ultraviolet region and the absorption efficiency was significantly improved owing to a highly efficient energy transfer from Ce³⁺/Eu²⁺ ion to Tb³⁺ ion in NTPO host certified by time-resolved PL spectra. Upon 300 nm excitation, the NTPO:Ce³⁺ is characterized by ultra-narrow-band green emission of Tb³⁺ with an absolute quantum yield of 94.5%. Unexpectedly, NTPO:Eu²⁺ emits bright yellow light with a color purity of 73% as a result of the blending of green light emission from Tb³⁺ and red light emission from Eu³⁺. The thermal stability has been improved by controlling the stoichiometric ratio of Na⁺. The prototype white LED used yellow-emitting NTPO:Eu²⁺ phosphor has higher color-rendering index (Ra = 83.5), lower correlated color temperature (CCT = 5206 K), and closer CIE color coordinates (0.338, 0.3187) to the standard white point at (0.333, 0.333) than that used green-emitting NTPO:Ce³⁺ phosphor, indicating the addition of the yellow light component improved the Ra of the trichromatic (RGB) materials.     

Improvement of photoluminescence properties of Ce3+- doped CaSrAl2SiO7 phosphors by charge compensation with Li+ and Na+

In this work, we prepared CaSr_1-xAl₂SiO₇:xCe³⁺ (0.03 ≤ x ≤ 0.12) and CaSr_0.94Al₂SiO₇:0.03Ce³⁺,0.03 M⁺ (M⁺ = Li⁺ and Na⁺) phosphors via solid-state reaction method. Structural and photoluminescence (PL) properties of the phosphors were also investigated. The prepared phosphors formed an orthorhombic crystal structure with the P2₁2₁2₁ space group. CaSr_1-xAl₂SiO₇:xCe³⁺ phosphors were effectively excited by near-ultraviolet (UV) light (345 nm), which is suitable with the emission of near-UV light emitting diode chips. A broad blue emission (402 nm) was detected in CaSr_1-xAl₂SiO₇:xCe³⁺ and CaSr_0.94Al₂SiO₇:0.03Ce³⁺,0.03 M⁺ phosphors; this was attributed to the 4f⁰5d¹ → 4f¹ transition of Ce³⁺. To maintain charge equilibrium, charge compensators, such as monovalent Li⁺ and Na⁺ ions, were doped into the CaSr_0.97Al₂SiO₇:0.03Ce³⁺ phosphor, significantly improving its PL properties. The strongest emission intensity was achieved in CaSr_0.94Al₂SiO₇:0.03Ce³⁺,0.03Li⁺ phosphor. Addition of Li⁺ charge compensator was highly effective in improving PL properties of CaSr_0.97Al₂SiO₇:0.03Ce³⁺ phosphors.