一种能量均衡的无线传感器网络分簇路由协议

由于无线传感器网络节点能量有限,为均衡无线传感器网络节点之间的能量消耗,提高整体网络的生命周期,针对LEACH协议中簇首选举时未考虑节点剩余能量因素、随机分簇等不足,提出了一种改进的LEACH协议.改进的LEACH协议在簇首选举时,以节点的剩余能量作为重要参考依据,优化节点担任簇首的概率.仿真结果表明,与传统的LEACH协议相比,改进的LEACH协议达到了能量消耗均衡的目标,从而延长了网络的生存寿命.     

基于能量高效的无线传感器网络LEACH协议改进

针对无线传感器网络节能问题,详细分析了经典分簇协议——LEACH,在其基础上针对LEACH的不足进行改进,提出了一种能量高效的分簇路由协议。该协议在簇头选举的算法中纳入节点剩余能量作为参数,提出各簇独立进行的簇头轮换机制,控制簇头在簇中的分布和各簇成员节点数目,并采用基于阈值的单跳与多跳相结合的簇间通信方式。仿真结果表明,改进后的协议较LEACH能够有效节约节点能量,均衡网络各节点消耗,显著延长了网络生存周期。     

无线传感器网络路由协议LEACH的研究与改进

经典的分簇路由协议LEACH在无线传感器网络中有着非常广泛的应用,但LEACH协议在成簇时没有考虑簇头节点的能量和位置,所以网络能耗较大。针对LEACH协议能耗较大的问题,为延长网络生存期,在LEACH协议的簇头选择公式中加入节点剩余能量和距离的参数,提出改进的LEACH协议。在网络模拟软件NS2平台下,对改进的LEACH协议与原LEACH协议进行仿真比较分析,结果表明改进后的协议中各个节点能耗均衡,避免个别节点过早衰亡,可以延长网络生存期。     

基于覆盖率的无线传感器网络LEACH协议研究及改进

无线传感器网络中如何对节点能量进行优化使用是无线传感器网络应用中的关键技术之一.本文针对现LEACH协议的分簇及覆盖率方面进行改进.主要根据邻居节点的数量,通过对簇头节点分布及簇内实际覆盖率的优化来提高整个网络寿命.由MATLAB仿真结果表明:与LEACH协议相比,LEACH-C协议不仅保证较高的覆盖率,并能有效的延长...     

一种基于LEACH协议改进的簇间多跳路由协议

为了均衡无线传感器网络的能量消耗,延长网络的生存时间,在研究几种基于均匀分簇和非均匀分簇的路由协议基础上,提出一种基于LEACH协议改进的簇间多跳路由协议。该协议引入能量因子和距离因子修正了LEACH协议的阈值函数。在簇间通信过程,簇头节点与Sink节点之间采用多跳通信方式,簇头与簇头之间形成一条通向Sink节点的优化路径。实验结果表明,相比于LEACH协议和EEUC协议,本文提出的新协议能够有效的均衡网络的能量消耗,延长无线传感器网络的寿命。     

基于优化簇半径的WSNs非均匀分簇路由

为了有效解决无线传感器网络分簇路由协议中,靠近SINK节点的簇头因特发大量数据而过早耗尽能量,提出了一种优化簇半径的非均匀分簇路由协议(UCOR),其核心思想是通过优化簇半径对无线传感器网络进行合理分簇,使靠近SINK节点的簇规模小于远离SINK节点的簇.仿真实验结果表明,与EEUC和LEACH等路由协议相比UCOR路由协议有效地均衡了节点能量消耗,显著地延长了网络生命周期.     

无线传感网络中基于综合因素的分布式路由算法

近年来由于在多方面的广泛应用,无线传感器网络受到了越来越多的关注.然而限于无线传感器网络自身的限制,如何更好地节省能量,仍为无线传感器路由协议设计中面临的主要问题之一.LEACH等基于分簇的路由协议通过成簇来减少能量消耗,但是成簇过程却带来额外消耗以及冗余.对LEACH协议中簇头生成算法进行了研究并提出了改进,提出了基于节点能量、节点距离以及节点度的分布式优化算法,并对优化算法进行分析与仿真.仿真试验表明,基于综合因素的分布式簇头选举算法优化了簇头选举方式和簇头的分布,从而节省了能量消耗,延长了网络生存周期.     

基于能量优化的无线传感器网络分簇路由算法研究

无线传感器网络的路由协议设计要同时关注单个节点的能耗及整个网络能量的均衡消耗.分簇算法能有效解决节点能耗受限与不同节点能量开销不平衡问题.在分析了传统分簇路由LEACH(low energy adaptive clustering hierarchy)协议中选择簇头算法不足和当前一些典型基于LEACH思想的路由改进算法...     

基于无线传感器网络LEACH协议的改进算法

基于无线传感器节点的位置信息及剩余能量,提出了一种基于LEACH协议的改进算法-PE-LEACH协议。PE—LEACH协议基于节点的位置信息进行分簇,基于节点的剩余能量及位置信息进行簇头的选择,当簇头距离汇聚节点较远时采取中转方式传送数据。较好的平衡了网络能量负载,延长了网络的生命周期。仿真结果表明：PE—LEACH协议与LEACH协议相比,提高了网络能量的利用率,延长了节点的生命周期。     

基于LEACH协议节能路由算法的研究与优化

针对LEACH(Low-Energy Adaptive Clustering Hierarchy)协议在分簇算法中存在的未考虑节点的剩余能量,簇头节点分布位置不合理等缺陷,提出基于LEACH协议的节能路由改进算法。在原有协议的基础上,优化了成簇的条件,充分考虑了剩余能量与相对位置,使得无线传感器网络的寿命得到进一步延长。仿真实验结果表明改进后的算法有效降低了网络能耗,提高了无线传感器网络的性能。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

基于AD9626的模拟信号采集存储卡设计

自然界的绝大部分信号都是以模拟的形式存在,因此模拟信号的采集转换存储在数字时代十分关键。文章讨论了在雷达信号处理领域基于AD9626的AD采集存储卡的设计原理、硬件结构和程序设计与芯片配置等问题,为今后相关领域的研究提供了可参考的方案。     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

A human-computer interface for non-computer specialists

The COM teleconferencing system was designed to be easy to use for both beginners and people with much computer experience. A number of design choices in organizing the human-computer interface were considered very carefully. These design problems are not unique for teleconferencing applications, but will appear in many other developments of human-computer interfaces for non-computer specialists. This report discusses naming conventions, menu format, user commands, help facility and the treatment of ‘type ahead’ from the users.