共查询到20条相似文献,搜索用时 125 毫秒
1.
自优化模拟技术在多目标水库优化调度中的应用 总被引:5,自引:1,他引:4
在分析水库等调蓄工程状态域及自优化模拟技术特征的基础上,建立了以防洪及兴利为目标的水库优化调度自优化模拟模型.将此模型应用于玉渊潭的优化调度中,表明用自优化模拟技术的最优状态域作水库优化调度图,概念清楚,结果可靠 相似文献
2.
水电站泄水闸门优化控制 总被引:1,自引:1,他引:1
以一次洪水优化调度计算出的优化泄水曲线为基础,考虑工程中的限制条件,利用函数的最佳平方逼近方法建立数学模型,求解工程上实用优化泄水过程线及相应闸门开闭方案.计算取得满意的成果. 相似文献
3.
通过对长岭分公司动力厂锅炉运行情况进行分析,对优化锅炉运行、提高锅炉热效率与安全性、优化运行的措施及改进方案等提出了几点建议,若实施相应优化运行措施,将较大提高经济效益。 相似文献
4.
5.
6.
随着发动机电控系统标定工作复杂程度的提高,为提高标定效率,自动优化标定技术日益受到重视。本文首先介绍了自动优化标定的基本原理,并对自动优化标定系统的结构及功能进行了阐述.然后对自动优化算法进行了分析,并介绍了一种典型的自动优化标定系统。 相似文献
7.
水电站水库优化调度理论的应用黄益芬(湖南省电力调度通信局,长沙,410007)1引言本文运用优化理论寻求一种最有效的优化调度方法,挖掘水库潜力,不仅可以增发水电,提高电量效益和容量效益,而且可提高整个电网的安全、经济运行水平和推进水电站及电力系统管理... 相似文献
8.
水资源优化配置是有效缓解区域水资源供需矛盾的重要方法和手段。针对传统蝴蝶优化算法(BOA)在高效快速地求解多目标水资源优化配置问题时存在的搜索精度低、收敛速度慢、易陷入局部最优及不能直接用于多目标问题求解等缺陷,通过引入快速非支配排序、拥挤度及精英策略方法对其进行了改进,利用ZTD函数验证了改进蝴蝶优化算法(ABOA)的优越性,最后将ABOA应用于邯郸市水资源优化配置模型求解中,并从帕累托前沿中选择了缺水量最少为最终方案。结果表明,邯郸市2035年(p=50%)总需水量为27.40×108m3,总分配水量为24.42×108m3,缺水量为2.98×108m3,缺水率为10.9%。其中生活和生态需水均能得到完全满足,第一、二、三产业在不同区域仍面临缺水问题,需大力开展节约用水来缓解。研究结果可为多目标水资源优化配置的求解提供参考。 相似文献
9.
10.
电站运行优化决策支持系统及优化值的确定 总被引:8,自引:0,他引:8
在电站运行优化的目标分析的基础上,依照决策支持系统(DSS)的结构及其设计思想,对电站运行优化决策支持系统(OODSS)的结构进行探讨,重点对运行优化的关键性难题——优化目标值的确定问题进行深入研究,在传统方法的基础上提出基于数据开采技术的新方法,并利用决策支持系统解决半结构化问题的优势提出进一步的综合性解决方案。图2表2参5 相似文献
11.
12.
热管废热溴化锂制冷机的优化设计 总被引:1,自引:0,他引:1
介绍了烟气驱动的热管废热溴化锂制冷机的优化设计,建立了热管废热溴化锂制冷机的优化设计计算模型,并编写了优化设计程序,得出了整个装置的结构参数。 相似文献
13.
本文运用传递矩阵法建立了消声器性能的数学模型,给出了兼顾消声器各项设计要求的优化设计模型,编制了计算机及优化程序,并进行了试验验证。 相似文献
14.
15.
Thermal, environment and economic impact of Trombe wall system for residential building in Mediterranean region will be studied in this paper. Moreover, optimum size of this system will be determined by using Life Cycle Cost (LCC) criterion. This will lead to develop an approach for designing the most economic residential building in Mediterranean region.Hour-by-hour energy computer simulations were run with TRNSYS program to analyze the performance of Trombe wall. Then, a complete economical equations of LCC have been built and optimized for variable Trombe wall area ratio as a function of economic and thermal parameters.The optimum Trombe wall area ratio from thermal and economical point of view is 37%. This optimum ratio has reduced LCC by 2.4%. Moreover, about 445 kg CO2 will be reduced annually. 相似文献
16.
17.
Five different methods for determining optimum fluid temperature changes during heating or cooling thick plate are examined. The first method presented in this paper is based on the discrete form of Duhamel’s integral. The method can be easily applied to bodies of complex shapes and is recommended for use, while three other methods: the Laplace transform, Burggraf analytical method, and space marching method can be applied to only a very limited number of optimum control problems. In the fifth approach, the optimum fluid temperature changes are approximated by a function with unknown parameters, which are determined using the least squares method. These five techniques were used to determine time changes of fluid temperature assuring linear increase of the slab wall temperature at the given location inside the body. No one approach is perfect. The optimum fluid temperature changes are burdened with a large uncertainty at the beginning of the heating process. 相似文献
19.
An optimum exergy efficiency is derived for flat-plate solar collectors as a ratio of exergy delivery of the collector to the maximum output exergy obtainable. It is a function of the optimum mass flow rate through the collector, which itself is obtained through an optimization of the exergy delivery of the collector. 相似文献
20.
曹杨庆 《小型内燃机与摩托车》2014,(3):66-68
解决现有摩托车CDI点火,输出能量与发动机需求匹配问题。首次成熟应用点火能量平衡理论:恒压点火,控制电路调节升压控制占空比信号,使点火电压稳定在设计值。最优控制,测量反映点火能量需求的发动机工况因素如温度、转速等,依据工况-点火能量数学模型,计算相应储能电压;测量储能电压状态,逐周期对点火能量作闭环控制。电池7V~15V或更大范围内,实现全工况点火能量最优,与最优提前角技术组成双优点火器。 相似文献