MCM-41介孔分子筛改性研究进展

介绍了有序介孔材料的定义和分类,MCM-41介孔分子筛、合成方法和形成机理,针对其MCM-41目前存在的一些问题,综述了国内外对MCM-41介孔分子筛最新的改性研究进展。     

MCM-41介孔材料的合成条件和特性对吸附镉离子的影响

以气相氧化硅为硅源,十六烷基三甲基溴化铵(cetyl trimethyl ammonium bromide,CTAB)为模板剂,分别在碱性[氢氧化钠(NaOH),四乙基氢氧化铵,tetraethyl ammonium hydroxide,(C2Hs)4NOH(TEAOH)]和酸性介质条件[盐酸(HCl)]T水热合成了MCM-41有序介孔材料MCM-41-N,MCM-41-T和MCM-41-H.用X射线衍射、氮气吸附-脱附等手段对比分析了合成的3种MCM-41介孔材料的物相、比表面积、孔径、孔体积等,发现酸性介质中合成的介孔材料的孔径最大.在此基础上,利用MCM-41介孔材料对比研究了处理含镉离子(Cd2 )废水的效果和机理,确定了不同介孔材料用量、不同初始pH值条件下MCM-41介孔材料对水中Cd2 的吸附率和吸附量.结果表明:介孔材料用量相同时,溶液pH值的增大有利于提高3种MCM-41介孔材料对水中Cd2 的处理效果.在pH值从7.0到8.0的过程中,其吸附率有1个突变,MCM-41-T的Cd2 吸附率从35.65%提高到62.15%;MCM-41-N的从38.80%提高到69.40%;MCM-41-H的从50.22%提高到73.47%.孔径最大的MCM-41-H对Cd2 的吸附效果最佳,最大吸附率为89.56%,最大吸附容量为8.57 mg/g.吸附溶液pH值的大小和介孔材料的孔径尺寸是决定吸附量大小的关键因素,因此,重点应通过优化合成工艺提高介孔材料的孔径.     

层状硅酸盐矿物合成MCM-41介孔分子筛的研究进展

文章分别概述了层状硅酸盐矿物和MCM-41介孔分子筛的优势,以及层状硅酸盐矿物合成MCM-41介孔分子筛的优势;综述了膨润土、高岭土、海泡石等层状硅酸盐矿物的提纯与活化方法,层状硅酸盐矿物合成MCM-41介孔分子筛的研究进展;最后就层状硅酸盐矿物合成MCM-41分子筛给出了自己的见解,提出了一些不足之处,并对其发展前景进行了展望。     

MCM-41介孔分子筛合成与改性的研究进展

简要介绍了MCM-41介孔分子筛的特点,应用和改性原因.综述了MCM-41介孔分子筛的合成方法,主要包括水热合成法,室温合成法,微波合成法等,列出了每种合成方法的优缺点和合成过程中的影响因素,pH值、晶化时间、晶化温度、模板剂的种类及用量等都会对MCM-41介孔分子筛的结构和孔径产生很大影响.阐述了MCM-41介孔分子筛的改性方法,包括金属杂原子取代法,如主族金属、过渡金属、稀土金属等,有机修饰或功能化法,负载型改性法,如负载金属氧化物、无机酸、杂多酸、有机碱、金属的配合物等.最后就MCM-41介孔分子筛的应用前景做了展望.     

MCM-41介孔分子筛的合成、改性及应用研究进展

介绍了MCM-41介孔分子筛的优点,主要表现在具有较大的比表面积,孔体积与孔径和可调变等。综述了MCM-41介孔分子筛的合成方法与改性研究现状,阐述了MCM-41介孔分子筛的应用研究进展。     

13X微孔沸石和MCM-41介孔材料的合成及用于处理含Cd2+废水

以天津蓟县钾长石矿粉为主要原料,经选矿、煅烧、水热处理等工艺成功合成了13X微孔沸石. 以气相氧化硅、氢氧化钠、十六烷基三甲基溴化铵等为主要原料,在水热条件下合成了MCM-41有序介孔材料. 采用XRD和N2吸附-脱附等手段对合成的13X沸石和MCM-41介孔材料的物相、比表面积、孔径、孔体积等进行了分析对比. 在此基础上,对13X沸石和MCM-41介孔材料处理含Cd2+废水的效果和机理进行了对比研究,确定了不同分子筛用量、不同初始pH值、不同混合时间下13X沸石和MCM-41介孔分子筛对水中Cd2+的吸附率和吸附量. 研究发现,尽管MCM-41的比表面积和孔径远大于13X沸石,但其对水中Cd2+的处理效果却低于13X沸石,这与13X沸石和MCM-41的孔道结构类型、化学组成、表面荷电性质等有关.     

介孔分子筛MCM-41的合成探索

以正硅酸乙酯(TEOS)为硅源、十六烷基三甲基溴化铵(CTAB)为模板剂,利用水热合成法制备了介孔氧化硅MCM-41,并采用TEM、XRD、N2吸附-脱附等测试手段对产物进行了表征。结果表明,合成的介孔材料为高质量的MCM-41。     

MCM-41分子筛的水热合成、改性及其应用研究进展

介绍了以水热合成法为主的介孔MCM-41分子筛的合成,简述了近几年国内外介孔MCM-41材料的改性,尤其是金属掺杂改性以及杂多酸改性等方面的最新研究,详细介绍了关于功能化的MCM-41在诸多工业反应上的应用,如在烷基化催化、酯化催化、异构化催化等反应中的应用,最后对介孔MCM-41分子筛材料的发展前景以及未来亟需解决的问题进行了展望。     

MCM-41介孔分子筛研究进展

介绍了介孔材料的定义,总结了MCM-41介孔分子筛的合成方法,针对其目前存在的孔径较小及酸性较小的缺点,综述了国内外对MCM-41介孔分子筛的孔径扩大分的最新研究进展。     

MCM-41-HY介孔-微孔复合分子筛的水热合成

以微孔分子筛HY浆液为母液,合成介孔-微孔复合分子筛MCM-41-HY。通过XRD、NH_3-TPD和N_2吸附-脱附等手段对复合材料进行了表征,并对复合分子筛的水热稳定性进行了考察。结果表明,复合分子筛MCM-41-HY具有中孔分子筛MCM-41和微孔HY型沸石的特点,并且与纯MCM-41分子筛相比,复合分子筛的酸强度明显增强,水热稳定性提高。     

Atomistic simulations for adsorption and separation of flue gas in MFI zeolite and MFI/MCM-41 micro/mesoporous composite

Adsorption of pure CO₂ and N₂ and separation of CO₂/N₂ mixture in MFI zeolite and MFI/MCM-41 micro/mesoporous composite have been studied by using atomistic simulations. Fully atomistic models of MFI and MFI/MCM-41 are constructed and characterized. A bimodal pore size distribution is observed in MFI/MCM-41 from simulated small- and broad-angle X-ray diffraction patterns. The density of MFI/MCM-41 is lower than MFI, while its free volume and specific surface area are greater than MFI due to the presence of mesopores. CO₂ is preferentially adsorbed than N₂, and thus, the loading and isosteric heat of CO₂ are greater than N₂ in both MFI and MFI/MCM-41. CO₂ isotherm in MFI/MCM-41 is similar to that in MFI at low pressures, but resembles that in MCM-41 at high pressures. N₂ shows similar amount of loading in MFI, MCM-41 and MFI/MCM-41. The selectivity of CO₂ over N₂ in the three adsorbents decreases in the order of MFI>MFI/MCM-41>MCM-41. With increasing pressure, the selectivity increases in MFI and MFI/MCM-41, but decreases in MCM-41. The self-diffusivity of CO₂ and N₂ in MFI decreases as loading increases, while in MFI/MCM-41, it first increases and then drops.     

MCM-41负载Lewis酸催化合成2-甲基吲哚

以苯肼和丙酮为原料,在负载有各种Lewis酸的MCM-41分子筛催化下采用Fischer吲哚合成法合成2-甲基吲哚,在比较了AlCl3/MCM-41、ZnCl2/MCM-41和FeCl3/MCM-41对反应的选择性和收率后发现,负载量为4mmol/g的ZnCl2/MCM-41具有对反应较好的选择性,目标产物收率达到了76.2%。     

n-Pentane isomerization over promoted SZ/MCM-41 catalysts

With metal sulfate as the precursor, the catalysts of sulfated zirconia on MCM-41, Al- and Ga-promoted sulfated zirconia on MCM-41 (named as SZ/MCM-41, ASZ/MCM-41 and GSZ/MCM-41, respectively) were prepared by direct dispersion in the as-synthesized MCM-41 materials, followed by thermal decomposition. The catalysts were characterized with various techniques such as XRD, FTIR, N₂ adsorption, NH₃-TPD, DRIFT, and TPR-MS. The ordered porous structure was still maintained in the catalysts. The addition of promoters helps to retard the phase transformation of ZrO₂ from tetragonal phase to monoclinic phase. Isomerization of n-pentane was investigated over the catalysts. In comparison to SZ/MCM-41, both promoted catalysts showed much improved catalytic activity and selectivity for isomerization of n-pentane. Moreover, the catalytical activities of both promoted catalysts for pentane isomerization remained steady over the period of 180 min while the activities of the unpromoted catalyst decreased in <120 min. Characterization of acidity showed no significant difference in strength distributions of the acid sites over the catalysts. The nature of acid sites in SZ/MCM-41 was affected by the presence of aluminum, but not affected by the presence of gallium. On the other hand, TPR study shows sulfur on GSZ/MCM-41 is much easier to reduce than SZ/MCM-41 and ASZ/MCM-41. The presence of gallium improved the redox capability provided by the sulfate ions in GSZ/MCM-41 catalyst. The causes for the promotion effects of Ga and Al are discussed.     

The synthesis and investigation of ruthenium phosphide catalysts

Highly active Ru₂P/MCM-41 and RuP/MCM-41 catalysts were synthesized by thermal decomposition of ruthenium chloride and hypophosphite precursors. The effect of experimental conditions on the final products is discussed. The results of investigation show that the reaction mechanism of ruthenium phosphide is different from nickel phosphide. Catalytic properties were tested for the hydrodesulfurization of dibenzothiophene and hydrodenitrogenation of quinoline. The results showed that both Ru₂P/MCM-41 and RuP/MCM-41 catalysts exhibited higher activities than Ru/MCM-41.     

WO3-ZSM-5/MCM-41催化剂的合成 及其催化氧化脱硫研究

以氢氧化钠溶液处理微孔沸石ZSM-5来提供硅铝源,合成了ZSM-5/MCM-41复合结构型分子筛。采用XRD、N2吸附脱附、TEM等方法对其进行了表征,考察了其水热稳定性。实验结果表明,碱处理合成的ZSM-5/MCM-41同时具有微孔孔道和介孔孔道结构,并具有优于介孔MCM-41分子筛的水热稳定性。以ZSM-5/MCM-41为载体负载三氧化钨后应用于噻吩/正辛烷模拟油体系,双氧水为氧化剂,催化氧化脱硫,WO3-ZSM-5/MCM-41（三氧化钨质量分数为10%）表现出良好的催化性能,脱硫率可达到93.6%。     

改性中孔分子筛MCM-41催化合成丙酸香叶酯

用H2SO4对中孔分子筛MCM（mobile crystalline material）-41进行改性,得到SO42–修饰的中孔分子筛SO42–/MCM-41。通过X射线衍射、红外光谱、NH3程序升温脱附和N2吸附–脱附等方法对所合成样品进行表征。用SO42–/MCM-41催化合成丙酸香叶酯,考察了催化剂处理方法、催化剂用量、催化剂再生对香叶醇酯化反应结果的影响,并比较了H2SO4、MCM-41和SO42–/MCM-41这3种催化剂对合成丙酸香叶酯的催化性能。结果表明：用浓度为0.50mol/L的硫酸浸泡MCM-41中孔分子筛1h,再于450℃焙烧3.0h,能得到良好长程有序性和结晶度的中孔分子筛SO42–/MCM-41,用其催化合成丙酸香叶酯,香叶醇的转化率最高可达88.82%,丙酸香叶酯的选择性为85.20%;H2SO4改性对MCM-41中孔分子筛结构影响不明显,但可提高其酸性。     

Cerium-containing MCM-41 materials as selective acylation and alkylation catalysts

The synthesis of Ce–MCM-41, Al–MCM-41 and Ce–Al–MCM-41-type mesoporous materials was carried out hydrothermally by refluxing the gel with magnetic stirring under atmospheric pressure for 24–36 h. The samples were characterized thoroughly in order to obtain the structural and textural properties, which reveal the presence of well-ordered M41S-type materials. The Ce–MCM-41 samples were used for catalytic acylation of alcohols, thiols, phenols and amines show good activity and selectivity including high chemoselectivity towards selective monofunctional acylation of bifunctional compounds. Quite importantly the acylation of bulky molecules such as cholesterol, ergesterol and β-sitosterol could be achieved using Ce–MCM-41 as solid catalyst. The presence of Ce along with Al in Ce–Al–MCM-41 was found to have synergistic effect as Ce–Al–MCM-41samples were more active catalysts for alkylation of naphthalene compared to either Ce–MCM-41 or Al–MCM-41 with comparable Si/Al or Si/Ce molar ratio.     

新型MCM-22/MCM-41复合分子筛上FCC汽油降烯烃芳构化反应

采用纳米组装法合成MCM-22/MCM-41微孔/介孔复合分子筛,分别以H-MCM-22和H-MCM-22/MCM-41为催化剂,在固定床微反装置上对FCC汽油进行降烯烃芳构化的对比考察。结果表明,在反应时间2 h内,与MCM-22相比, MCM-22/MCM-41具有高的芳构化性能和持久的初始活性,复合分子筛汽油改质的产物中,芳烃体积分数由28.58%上升至51.1%,烯烃体积分数由34.04％降至5.8％。探讨了新型H-MCM-22/MCM-41复合分子筛用于FCC汽油改质的操作条件以及催化剂失活再生性能。结果表明,最佳反应条件为：反应温度400 ℃,压力2 MPa,空速3 h^-1。失活催化剂经过两次再生,降烯烃芳构化性能基本不变。