用VB6.0实现西门子PLC与PC机的串行通讯

对西门子系列PLC的通讯协议进行了详细的介绍,并以VB6.0开发系统在WINDOWS环境下实现了PC机与西门子系列PLC之间的串行通讯.文章给出了PLC和VB6.0相关的主要程序,通过该通讯程序实现了PC机对西门子系列PLC的监控和控制.同时本程序对PC机与其他型号PLC之间的通讯也有一定的借鉴意义.     

基于S7-200 PLC的自由端口通信的研究和实现

研究自由端口通信在计算机与西门子S7-200PLC之间数据传输中的应用与实现.论述下位机PLC程序和上位PC机VB程序的设计思路以及具体实现,通过与西门子同类软件的性能比较,结果表明自由端口通信程序软件提高了计算机与PLC之间的数据传输效率,且运行稳定.     

Windows环境下PLC与上位机的串行通信

以日本 OMRON公司 C2 0 0 H系列可编程控制器为例 ,介绍了 Windows环境下利用 VB6.0实现 PC与 PLC串行通信的方法。重点讨论了 OMRON C2 0 0 HE系列 PLC的通信功能及 VB6.0平台上上位机串行通信程序的设计。所研究的方法和编制的程序已成功地应用于教改项目“测控专业综合实验平台”中。     

利用VB6.0实现PC机与PLC的串行通讯

介绍了上位计算机和PLC的通讯实现方法.通过设置西门子PLC为自由口通讯模式,在上位计算机中使用VB6.0进行编程,实现了上、下位机之间的串行通讯.结果表明,两者的通讯具有良好的可靠性.文中给出了部分程序清单.     

PLC恒压供水上位机控制系统的开发

本设计基于VB 6.0实现西门子S7-200系列PLC与上位机之间的串行通信,旨在提高PLC控制系统的实时监控性,完善实验台控制系统的控制功能。一方面,利用VB 6.0制作友善的人机监控界面,可以根据需要设置输入参数并实时显示实验输出结果;另一方面,通过VB 6.0提供的串行通信ActiveX控件MSComm,采用自由口通信协议实现PLC与上位机之间的通信,使上位机能够及时获取相关实验数据进行存储和处理。本设计应用于恒压供水系统中,对水泵的运行情况进行监控。     

PC机与西门子PLC在船舶电站自动化系统中的通信实现

介绍PC机与西门子PLC在船舶电站自动化系统中的通信方式,利用VB6.0中MSComm控件实现了PC与PLC的串行通信,该通信系统简单、可靠,有较高的使用价值.     

基于VB的PLC 1:N网络监控系统

本文对三菱FX系列PLC 1N网络的构成进行了研究,阐述了1N网络监控系统的硬件组成及上住机(PC)和下位机(PLC)之间串行通讯的方法,具体分析了通讯协议并给出了基于VB设计的通讯中数据发送的代码.     

基于PC和PLC的机械手控制系统设计

本文介绍了基于VB语言环境,采用MSComm通讯控件和RS-232通讯协议实现PC与西门子S7-200 PLC之间的通讯方法,并说明了这种通讯方式在机械手控制系统中的具体应用.重点叙述了PLC在自由通讯口模式下几个特殊存储器和VB串行通讯控件属性设置,给出了PLC实现数据接收与发送的具体编程方法.     

VB6．0环境下三菱FX系列PLC与上位机的串行通信

利用上位机来监控可编程控制器的通讯技术是现代工业控制中的常用技术。以PC机为上位机,PLC为下位机,针对三菱FX系列PLC与上位机之间的通讯协议,给出了利用VB6．0实现上位机与PLC串行通信的详细设计流程。试验结果表明,这种串行通信方法,传输数据准确、简单、移植性强。     

基于MX Component的PC-PLC通讯设计

通过PC机的COM口,应用三菱MXComponent软件包实现PC-PLC的通讯,在VB6.0平台下通过添加ActEasyIF控件,编写了上位机监控系统,可使PC机通过通讯口直接对PLC的软设备进行读/写、强制置/复操作。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。