QUALITY CHARACTERISTICS OF CORN NOODLES CONTAINING GELATINIZED STARCH, TRANSGLUTAMINASE AND GUM

ABSTRACT

Effects of gelatinized corn flour addition level (40, 60 and 80%), gum (locust bean gum or xanthan gum, 3%) and/or transglutaminase (TG, 0.5%) on quality characteristics of corn noodle were investigated. Gelatinized corn flour was used as a binder for remaining untreated corn flour (60, 40 and 20%). Corn noodles were evaluated in terms of cooking properties (cooking loss, total organic matter (TOM), water absorption, swelling volume and maximum force), color, sensory and pasting properties. Noodle sample containing gelatinized corn flour at level of 80% exhibited best cooking and sensory properties. Gum and/or TG were added to this noodle formula. Gum improved noodle quality in terms of some cooking properties. Improving effect of xanthan gum was more obvious. Covalent crosslinks catalyzed by TG caused significantly lower cooking loss and TOM values. Gums generally caused increases in Rapid ViscoAnalyzer viscosity values of noodles. Gum and/or TG show great promise in processing of gluten‐free corn noodle.

PRACTICAL APPLICATIONS

Celiac disease occurs in about one in 300 people in Europe. Lack of gluten in cereals that are safe for gluten‐free food causes major problems in dough processing and product quality. Technological difficulties in production and lack of awareness of number of celiac patients in need of gluten‐free products might restrict researches related to gluten‐free food. In recent years, various approaches to overcome the technological problems are arising. Searching for ingredients that have ability to mimic properties of gluten in production of gluten‐free food is the most common approach. We report herein beneficial effects of gelatinization, gum (locust bean gum, xanthan gum) and/or transglutaminase (TG) in gluten‐free corn noodle production. They have major improving effects in noodle quality and show great promise as a processing aid in bulk manufacture of gluten‐free corn noodle. To the best of our knowledge, there is no study investigating utilization of TG in gluten‐free corn noodles.     

Utilization of rice starch with gums in Asian starch noodle preparation as substitute for sweet potato starch

Starch noodles were produced using a medium grain rice starch in the presence of various gums, and physical properties of the noodles were compared with sweet potato starch noodle. Pasting viscosity of the rice starch was lower than that of sweet potato starch (830 vs. 1,618 cp as peak viscosity). The peak viscosity, however, was increased by the addition of gums (0.1% based on dispersion), and especially xanthan was the most effective in increasing the peak viscosity (1,478 cp). The cooking loss for the rice starch noodles (1.5 mg/mL), greater than that for the sweet potato starch noodle (0.2 mg/mL), was effectively reduced to 0.8 and 0.9 mg/mL, respectively, by the addition of locust bean gum (LBG) and curdlan. The addition of LBG or gellen gum also increased the hardness of the rice noodles. Aging (extended retrogradation) the noodles was effective in reducing the cooking loss and improving the textural properties of the rice starch noodles. The combination of the gum addition (like LBG) and aging of the rice starch noodle might be useful for utilizing rice starch as a substitute for sweet potato starch in Asian noodle preparation.     

Effect of locust bean/xanthan gum addition and replacement of pork fat with olive oil on the quality characteristics of low-fat frankfurters

The effects of reducing fat level from 20% to 12% and 9%, substituting pork fat with olive oil and adding locust bean/xanthan gum (0.5% and 0.6%) on emulsion stability, jelly and fat separation, processing yield, cook loss, texture and sensory characteristics of frankfurters were investigated and compared with control samples. Addition of locust bean/xanthan gum produced a significant increase in hydration/binding properties, characterised by lower cook losses, increasing yield, better emulsion stability and lower jelly and fat separation. The substitution of pork fat by olive oil did not affect these parameters. Indeed, results showed that reducing fat levels together with increasing moisture and locust bean/xanthan gum addition do not affect the sensory or textural properties, but olive oil addition produces a decrease in hardness and an increase in adhesiveness, however the overall acceptability was not affected.     

Controlling rheology and structure of sweet potato starch noodles with high broccoli powder content by hydrocolloids

Incorporating high volume fractions of broccoli powder in starch noodle dough has a major effect on its shear modulus, as a result of significant swelling of the broccoli particles. Several hydrocolloids with distinct water binding capacity (locust bean gum (LBG), guar gum, konjac glucomannan (KG), hydroxypropyl methylcellulose (HPMC) and xanthan gum), were added to systems with 4 and 20% (v/v dry based) broccoli particles, and the effect of this addition on dough rheology, mechanical properties and structure of cooked noodles was investigated. Hydrocolloids with low (LBG and guar gum) and intermediate (KG) water binding capacity had no significant effect on shear rheology of the dough. Adding hydrocolloids with high water binding capacity (HPMC and xanthan gum) decreased the shear modulus of dough with 20% broccoli particles significantly. CLSM analysis of cooked noodles showed that in samples containing xanthan gum there was also an inhibition of swelling of starch granules. Strength and stiffness of cooked noodles with 20% broccoli particles were higher for samples containing xanthan gum, than samples without xanthan gum. The cooking loss and swelling index of samples with added hydrocolloids were slightly lower than samples without hydrocolloids. Our results showed that hydrocolloids with high water binding capacity can be used to control the degree of swelling of vegetable particles and starch granules in starch noodle products, and thereby control both dough rheology and textural properties of the cooked noodles.     

刺槐豆胶与黄原胶复配体系的流变性

研究刺槐豆胶/黄原胶复配体系的流变性,并采用流变学的Cross模型进行拟合分析。结果表明:刺槐豆胶与黄原胶复配可以产生协同作用,当刺槐豆胶与黄原胶的复配体积比为4∶6时,复配体系的黏度最大,触变测试中形成的滞后环面积最大,并且在黏弹性测试中储能模量G’表现出最大值。因此,刺槐豆胶与黄原胶的最佳复配比例为体积比4∶6。对最佳比例复配体系进行不同温度处理后测试可知,最佳复配体系的最适处理温度为80℃,得到的复配体系黏度最大;复配体系的p H值在6.0~10.0之间时,其黏度变化较小,保持相对稳定。     

不同多糖对发酵空心挂面品质的影响

酵母发酵空心挂面是一种新型的工业化挂面产品,具有营养丰富、风味独特等特点,但尚存在干挂面韧性差和易断条、熟面条弹性不足等问题亟待解决。该文研究了瓜尔豆胶、黄原胶、海藻酸钠、羧甲基纤维素钠、魔芋粉5种常用多糖对发酵空心挂面微观结构、力学性质、蒸煮特性、质构品质和感官品质的影响。结果表明：与对照相比,单独添加0.1%瓜尔胶、海藻酸钠、羧甲基纤维素钠和魔芋粉时,挂面的蒸煮损失率从6.5%分别降低到5.8%、5.7%、5.3%和5.9%;添加0.5%黄原胶时,干挂面的面体更加致密,面条的最佳蒸煮时间增长了1.25 min,蒸煮损失减少了0.41%,干挂面的抗断裂强度和柔韧性、熟挂面的弹性、咀嚼性和拉断力分别提高了31.06%、49.79%、24.87%、61.62%和77.73%,此添加量下的面条的食用品质最佳,感官评价得分89分。5种多糖均显著改善了发酵空心挂面的柔韧性,及煮后挂面的弹性、咀嚼性和拉伸特性,其中黄原胶对发酵空心挂面的微观结构、力学性质、蒸煮特性、质构品质和感官品质改良效果较好。     

MODEL PREDICTION FOR SENSORY ATTRIBUTES OF NONGLUTEN PASTA

Response surface methodology was used to predict sensory attributes of a nongluten pasta and develop response surface plots to help visualize the optimum region. Optimum regions of xanthan gum, modified starch, and locust bean gum were selected by overlapping the contour plots of sensory properties of nongluten pasta as compared with the control pasta. The formula of nongluten pasta that possessed the most desirable properties was xanthan gum at 40 g, modified starch at 35 g, locust bean gum at 40 g, tapioca starch at 113 g, potato starch at 57 g, corn flour at 250 g, and rice flour at 50 g. The quality of nongluten pasta could be improved by using different levels of nongluten starches and flours, and nonstarch polysaccharides.     

Rheological properties of gluten-free bread formulations

In this study, the rheological properties of rice bread dough containing different gums with or without emulsifiers were determined. In addition, the quality of rice breads (volume, firmness and sensory analysis) was evaluated. Different gums (xanthan gum, guar gum, locust bean gum (LBG), hydroxyl propyl methyl cellulose (HPMC), pectin, xanthan–guar, and xanthan–LBG blend) and emulsifiers (Purawave^™ and DATEM) were used to find the best formulation for gluten-free breads. Rice dough and wheat dough containing no gum and emulsifier were used as control formulations. The rice dough containing different gums with or without emulsifiers at 25 °C showed shear-thinning behavior with a flow behavior index (n) ranging from 0.33–0.68 (except pectin containing samples) and consistency index (K) ranging from 2.75–61.7 Pa sⁿ. The highest elastic (G′) and loss (G″) module were obtained for rice dough samples containing xanthan gum, xanthan–guar and xanthan–LBG blend with DATEM. When Purawave^™ was used as an emulsifier, dough samples had relatively smaller consistency index and viscoelastic moduli values compared to DATEM. The viscoelastic parameters of rice dough were found to be related to bread firmness. Addition of DATEM improved bread quality in terms of specific volume and sensory values.     

增稠剂和乳化剂对豆浆稳定性的影响

为增加豆浆的稳定性,采用测定豆浆稳定系数、表面张力及进行感官评分的方法筛选适合用于豆浆样品的增稠剂和乳化剂,确定了最适宜的豆浆增稠剂和乳化剂的种类及其用量。经过黄原胶、刺槐豆胶、卡拉胶、结冷胶和海藻酸钠的单因素实验,黄原胶和刺槐豆胶的复配实验及黄原胶、刺槐豆胶和乳化剂(单硬脂酸甘油酯和蔗糖脂肪酸酯)的正交实验得出以下结果:黄原胶和刺槐豆胶对增加豆浆稳定性有着较好的效果,当它们的质量浓度分别为0.2g/L时,其稳定系数分别为0.737、0.742。单硬脂酸甘油酯和蔗糖脂肪酸酯复配后HLB=8、质量浓度为2g/L时,豆浆样品的稳定性最好,表面张力为41.7mN/m。当黄原胶、刺槐豆胶、乳化剂质量浓度(单硬脂酸甘油酯质量∶蔗糖脂肪酸酯质量=7∶4)分别为0.14、0.14、2g/L时豆浆的稳定性最好,此时豆浆样品的稳定系数为0.879,表面张力为41.6mN/m,感官评分为96。     

Dielectric and Thermal Properties of Rice Cake Formulations Containing Different Gums Types

In this study, dielectric properties of rice cake formulations containing different gum types (xanthan, guar, locust bean, HPMC, and kappa-carrageenan) were determined at temperatures between 25 and 90°C at 2450 MHz. Moreover, thermal properties of these formulations were determined by using differential scanning calorimeter (DSC). Dielectric properties of cake batters were found to be dependent on cake formulation. Xanthan and guar gum containing cake batters had the highest dielectric constant and loss factor values at 25°C. Temperature dependence of dielectric properties was not significant until temperature of 85°C. Gelatinization enthalpy of batter increased with the addition of gums.     

Effect of gums on the multi-scale characteristics and 3D printing performance of potato starch gel

This research investigated the multi-scale characteristics of potato starch gel (PSG) with different addition ratios of xanthan gum (XG) and locust bean gum (LBG). These characteristics are closely related and had significant impacts on 3D printing performance. Both xanthan gum and locust bean gum were able to increase the apparent viscosity, storage modulus (G′) and loss modulus (G″) of the blended gel system to varying degrees. Large amplitude oscillation shear (LAOS) was used to detect slight rheological differences led by microstructure changes. The critical strain values of the blended gel system rose as the addition ratio of locust bean gum increased. At the same time, the elastic and viscous Lissajous curves could characterize the viscoelastic changes under large strains. Fourier transforms infrared spectroscopy (FT-IR) illustrated that locust bean gum could strengthen the hydrogen bonds so that the gel had stronger mechanical properties compared with the addition of xanthan gum. Scanning electron microscopy (SEM) could observe the changes in the microstructure of the blended gel systems with addition of different addition ratios of gums. From the perspectives of 3D printing results and data analysis, the appropriate amount of xanthan gum improved the fineness and fluidity of the gels by virtue of its lubricating and coating characteristics, while the locust bean gum enabled them to have stronger shape retention abilities and better performances of resisting compressed deformation.     

Swallowing profiles of food polysaccharide solutions with different flow behaviors

The relationship between physiological response and sensory perceived scores in swallowing was investigated using food polysaccharide solutions. Solutions from xanthan gum (0.3–0.9%) and locust bean gum (0.5–0.8%) were used as specimen with different flow behaviors identified by static and dynamic rheological methods. Acoustic analysis and sensory evaluation were carried out to investigate the swallowing profiles using the same human subjects. From acoustic analysis, time required for bolus to transfer through the pharyngeal phase t₂ decreased with increasing concentration of xanthan gum despite the viscosity increase. Also, the acoustic balance for the swallowing sound shifted to a higher frequency range with increasing concentration. The t₂ for locust bean gum was much less concentration-dependent and consistently larger than that for xanthan gum when compared at equivalent shear viscosity at 10 s⁻¹. Also, the acoustic balance for the swallowing sound was less concentration-dependent than that for xanthan gum. From sensory evaluation, 0.6% xanthan gum was scored the highest in perceived swallowing ease, while 0.75% locust bean gum was scored the lowest. Both t₂ and the acoustic balance correlated well with perceived swallowing ease. Results indicate that xanthan gum solutions flow as one coherent bolus through the pharyngeal phase with smaller variation of flow velocity than locust bean gum solutions, leading to a greater sensation of swallowing ease. “Structured fluid”, defined as fluid with yield stress such as xanthan gum solutions, is a rheological nature that allows bolus to be swallowed in one go, relating to perceived swallowing ease of liquid foods.     

Textural and Sensory Properties of Low-Fat Beef Sausages with Added Water and Polysaccharides as Affected by pH and Salt

Low-fat beef sausages with 23% added water, 1 or 2.5% NaCl, 0.5% polysaccharide gums, and pH adjusted to 5.2, 5.6 or 6.2, were analyzed for textural properties. The l - and k -car-rageenans increased (P<0.05) cooking yield, hardness, and bind strength for 1%-salt sausage, but had little effect on the 2.5%-salt sausage. Sausages containing alginate, locust bean gum, and xanthan gum were softer, more deformable, crumbly and slippery (P<0.05), when compared to nongum controls. An increase in pH sharply enhanced the bind strength in all gum treatments. Both the instrumental and sensory panel results suggested that α- and k -carrageen-ans were the only acceptable gums for use in low- or high-salt beef sausage products.     

Cooking quality and sensorial properties of noodle supplemented with oat flour

Effects of oat flour addition (10, 20, 30, and 40%) on the quality characteristics of noodle were investigated. Noodles were evaluated in terms of cooking quality, color, chemical, and sensory properties. As oat flour level increased, protein, crude fat, ash, Mn, Fe, Zn, and Mg contents of noodles increased. Oat flour caused increases in cooking loss of noodles. Sensory and cooking characteristics of noodles were negatively effected when oat flour level was increased compared with the control. Noodle with 10% oat flour received the highest sensory scores in all noodle samples containing oat flour. Overall acceptability scores of control and in only the noodle with 10% oat flour were found statistically (p<0.05) similar. Especially, the usage of 10% oat flour in noodle formulation gave satisfactory results in terms of acceptability.     

Effect of some hydrocolloids on the rheological properties of different formulated ketchups

Five different hydrocolloids (tragacanth gum, guar gum, carboxy methyl cellulose, xanthan gum and locust bean gum) were added, at levels of 0, 0.5, and 1 g/100 g (w/w), respectively, to three different formulated ketchups which were processed from cold-break tomato paste dilutions, having total soluble solid (TSS) contents of 7.5, 10, and 12.5 g/100 g (w/w), in sequence, and the effect of these hydrocolloids on the rheological properties of tomato ketchups was investigated using a viscometer with smooth surface wide-gap coaxial cylinders. All hydrocolloids increased the consistency of the tested samples; however, guar gum and locust bean gum caused the maximum increase, followed by xanthan gum, tragacanth gum and carboxy methyl cellulose (CMC). Both the ketchup formulation and the hydrocolloid concentration were found to affect the consistency of ketchups. The highest consistency index was obtained by processing dilutions with a TSS content of 12.5%, and the addition of hydrocolloids at the level of 1%. The fluidity of the ketchups decreased with both the addition of all hydrocolloids and the increase in hydrocolloids concentration. Furthermore, the fluidity of the ketchups was also affected by ketchup formulation, and it was found to be the lowest for the samples prepared from the tomato paste dilutions having a TSS content of 12.5%.     

蛋清蛋白添加对籼米-绿豆粉粉质特性及挤压米粉丝品质特性的影响

将籼米粉、绿豆粉和蛋清蛋白粉按照一定的比例复配,开发高纤维含量的杂粮米粉丝。研究了绿豆和蛋清蛋白的添加对米粉糊化特性、流变特性以及挤压米粉丝微观结构、蒸煮特性和质构等品质特性的影响。结果显示:添加一定量的绿豆粉和蛋清蛋白粉后,混合粉的峰值黏度、最低黏度、最终黏度、回生值、弹性模量、黏性模量均逐渐下降。随着绿豆粉的添加(25%,50%),米粉的蒸煮时间、断条率、蒸煮损失和吸水率均上升,硬度降低,表明米粉的品质显著降低,由扫描电镜图可以发现,加了绿豆粉之后米粉截面变得越来越粗糙,裂纹和孔洞明显增多。但当加入7.5%的蛋清蛋白后,米粉的蒸煮时间、蒸煮损失和断条率均下降,质构特性有一定程度的改善,表明蛋清蛋白良好的凝胶特性有助于提升高纤维含量挤压米粉丝的品质。     

Rheological behaviour of pullulanase-treated guar galactomannan on co-gelation with xanthan

The present study involves the use of non-specific enzyme pullulanase (from Bacillus acidopullulyticus) to remove galactose residues from guar galactomannan to obtain modified guar galactomannan mimicking the functional properties of locust bean gum. The modified guar galactomannan blended with xanthan exhibited the rheological behaviour of elastic modulus (G′) greater than viscous modulus (G″) with a decrease in tan δ value similar to locust bean gum/xanthan blend. Also a twofold increase in the magnitude of elasticity compared to xanthan alone suggested the synergistic interaction with formation of three dimensional networks. The modified guar galactomannan with galactose content of 21% and M:G ratio 1:3.8, almost akin to locust bean gum, showed a better interaction with xanthan. Dynamic stress sweep study of modified guar galactomannan/xanthan blend with increased yield stress of 800 dynes/cm² also indicated the synergistic behaviour. Modified guar galactomannan also revealed the maximum synergistic interaction with xanthan at a mixing temperature of 60 °C than at 20 °C, 30 °C, 40 °C and 50 °C, respectively. Modification of guar galactomannan by pullulanase is an alternative route to produce galactose-depleted guar galactomannan with enhanced rheological functionalities on co-gelation with xanthan, as a cost effective replacement to locust bean gum.     

Comparison of the effects of gums on dynamic rheological properties of acetylated sweet potato starch

Dynamic rheological properties of acetylated sweet potato starch (ASPS) pastes mixed with 3 commercial gums (guar gum, locust bean gum, and xanthan gum) were investigated at different gum concentrations. The dynamic moduli of the ASPS-gum mixtures were higher than those of the control, and they increased with an increase in gum concentration. In particular, the G′ value of xanthan and G″ value of guar gum at a 0.6% gum concentration were much higher as compared to those of other mixtures. Tan δ values of ASPS-xanthan mixtures were much lower than those of other samples, indicating that the elastic properties in the ASPS-gum mixture systems were strongly affected by the additions of xanthan. These results suggest that the presence of gums in ASPS modifies the viscoelastic properties, and that these modifications are dependent on the gum type and gum concentration.     

Surface tension of Phaseolus vulgaris and coccineus proteins and effect of polysaccharides on their foaming properties

The surface tension of protein isolates from common bean (Phaseolus vulgaris L.) and scarlet runner bean (Phaseolus coccineus L.), prepared by isoelectric precipitation and ultrafiltration was evaluated, with respect to protein concentration (0.001–0.1% w/v) and pH (pH 4.5, 5.5, 7.0 and 8.0). Surface tension was most reduced, and with a higher rate of reduction at higher protein concentration and at pH 8.0. Foams (1, 2% w/v protein), at the same pH values, with and without the addition of polysaccharides, were studied. The proteins’ foaming behaviour was related to their adsorption behaviour. Arabic gum, locust bean gum (0.1% and 0.25% w/v), xanthan gum and a xanthan/locust bean gum mixture (0.1% w/v) had a positive effect on foam creation. All polysaccharides increased foam stability, probably due to the viscosity increase and to the creation of a network, which prevents the air droplets from coalescence. Isolates from P. coccineus and isolates obtained by ultrafiltration seemed to exhibit better foaming properties.