共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
设计了一款基于TRF7960和STC11F32XE单片机的多协议自适应功能的射频读卡器,给出了射频读卡器的具体硬件和软件设计方案,并对设计中的难点作了分析。该读卡器支持多协议,支持防碰撞和多标签识别,功能完备,操作灵活,可以为各种RFID应用提供灵活有效的解决方案,同时也可为学习RFID技术的人员提供一个多协议、低价位的开发平台。 相似文献
3.
针对目前读卡器主频低、速度慢、便携性差等不足,提出了一种基于S3C6410的RFID读卡系统设计方案。本文以高性能的S3C6410嵌入式微处理器为核心,选用新型的CR95HF射频芯片,开发设计了一款高主频的搭载Android嵌入式系统的新型手持式RFID读卡器。该读卡器工作在高频13.56MHz,支持ISO14443、ISO15693等多种协议。实验证明,该读卡器能对符合协议的标签进行读写操作,读写距离能够满足需要,具有便携、稳定性高、处理速度快等特点。 相似文献
4.
针对目前RFID读卡器的功耗大、RFID管理系统不灵活等缺陷,设计了一种基于MSP430系列单片机CC430F5135为核心的无线低功耗RFID系统。该系统具有功耗低、无线采集每个RFID读卡器数据、方便控制等特点。介绍了CC430F5135特点及其内部集成的RF无线通信模块,分析了系统的结构原理,并详细分析了RFID读卡器模块、RF无线收发模块和管理系统模块。实验结果验证了采用CC430F5135设计RFID系统的可行性,系统运行稳定可靠。 相似文献
5.
6.
稳固加密(insubvertible encryption)是一种新型的重加密技术,它在RFID安全协议设计中发挥着重要的作用.最近,Osaka等人基于稳固加密和守护代理提出了一种新的RFID认证协议,并声称该协议具有不可追踪性、标签不可欺骗性、抵抗替换攻击、拥有权可以安全转移、密钥安全同步更新等.利用该协议中读卡器随机数和守护代理随机数的差量恒等关系,提出了一种异步攻击方法:通过伪造差量恒等的随机数,可以有效地进行读卡器和后台服务器的所有认证计算,并使服务器上的密钥和标签密钥异步,从而导致合法标签被拒绝服务.研究结果表明:该协议在异步攻击下是很脆弱的. 相似文献
7.
8.
为了解决当远程证明方案中安全性差、效率较低的问题,提出了一种模块级的远程证明协议.在构建模块属性签名时采用签密,减少了属性证书的生成时间;在验证属性证书时采用了分级验证的方法,提高了效率.通过协议的模型实例验证了协议的可行性.实验结果表明,该方案可以快速生成可信平台中各模块的属性签名,分级验证有效减少了远程证明方案的运行时间,提高了远程证明的效率. 相似文献
9.
针对航空读卡器存在便携性差、速度慢和标签存储容量小等问题,提出了一种基于STM32的大容量射频识别(RFID)系统设计方法。以高性能的STM32嵌入式微处理器为核心,采用新型的CR95HF射频芯片,设计了一款工作在高频(HF)频段并支持ISO 15693、ISO 18092等多种协议的新型手持式RFID读卡器,详细阐述了系统的电源、天线设计和软件的速率、误码优化。同时,设计了一款与之匹配的被动式大容量电子标签,其存储容量高达32KB,与读卡器构成大容量RFID系统。实验结果表明,与传统读卡器相比,该读卡器的读写速度提升2.2倍,误码率降低91.7%,标签容量提升255倍,为航空物流领域的快速、准确和大数据需求提供了更好的选择。 相似文献
10.
郑欣 《网络安全技术与应用》2021,(2)
通过研究RFID认证协议,发现了一些安全问题,对此提出了一种基于hash函数的双向认证协议。该协议通过随机数和秘密值的计算来完成数据库、标签和读卡器之间的认证,有效防止了窃听、重放攻击、假冒攻击等常见攻击。 相似文献
11.
基于RFID的无线传感器网络节能MAC技术 总被引:1,自引:0,他引:1
将无线射频识别(RFID)技术与无线传感器网络相融合,设计具有RFID读取功能的传感器节点。针对基于RFID的无线传感器网络,提出基于簇族结构的节能MAC协议——CSMAC协议。该协议具有节能和广播导向等特征,采用冲突减少机制来提高信道利用率,同时采用减少发送时间、减少监听时间、减少开关转换时间等功率优化机制,以提高网络能量效率。仿真试验表明,与传统MAC协议相比,CSMAC协议更能提高信道利用率和能量效率。 相似文献
12.
Liangzhen Yin Qi Li Tianhong Wang Lu Liu Weirong Chen 《Asian journal of control》2019,21(4):1796-1810
Improving the efficiency of the proton exchange membrane fuel cell (PEMFC) system is the main problem should be solved for the commercialization of PEMFC. In this paper, the efficiency characteristic of PEMFC system under load and stack temperature variation is analyzed through theoretical modeling and experimental verification. For high efficiency operation of PEMFC system, the maximum efficiency control strategy (MECS) is proposed for thermal management of PEMFC system. According to the efficiency characteristics of PEMFC system, the optimal efficiency trajectory of system is obtained under maximum efficiency optimization (MEO). As PEMFC system is a nonlinear system with the characteristics of time‐variation, and uncertainty, a constrained generalized predictive control (CGPC) is proposed to realize real‐time optimal efficiency trajectory tracking. The MECS based on MEO and CGPC is implemented on‐line, experimentally validated on the established H‐300 open‐cathode PEMFC system. The experimental result shows better tracking ability compared with PID control and testifies the validity of MECS for increasing the system efficiency. Therefore, the proposed MECS can provide better system dynamic response and higher system efficiency. 相似文献
13.
结合多篇文献发现现有的方案并不高效,在文献[5]的基础上提出了一种高效的无证书代理盲签名方案。本方案通过对部分密钥的适当修改来减少双线性对运算;同时,由于网络服务的不断提升,利用通讯耗时替代运算耗时同样能够提升效率。与多种方案的签名算法与验证算法作效率分析对比得出,该方案在效率上具有极大的提升,且方案满足不可伪造性、不可否认性、可鉴别性和盲性等性质。 相似文献
14.
Radio Frequency Identification (RFID) technology manifests its potential in widespread applications, such as warehouse management, library maintenance and product tracking, etc. One of the most important characteristics for RFID-based applications is their 3-Dimensional localizability. Recently, researchers have proposed some 3-Dimensional RFID-based localization schemes, but most of them suffer from low efficiency. In this paper, we target at improving the efficiency of RFID-based localization, including energy efficiency and time efficiency, without sacrificing localization accuracy. The main idea is to adopt a “jumping probe” in distance estimation, based on which we propose the 3-Dimensional RFID-based localization schemes called JumpLoc, including a passive scheme two active schemes. In the passive JumpLoc scheme, a target tag will be located based on the estimated distances between itself and some reference readers. While the active schemes include basic and enhanced active JumpLoc schemes to locate a target reader. We numerically analyze the localization efficiency improvement of the proposed JumpLoc schemes. We also conduct simulations to validate their effectiveness, the results of which show that the passive JumpLoc scheme can improve the energy efficiency and time efficiency by at least 56% and 34% respectively, and the active JumpLoc schemes can improve the energy efficiency and time efficiency by at least 82% and 83% respectively. 相似文献
15.
提高科学工作流在云环境中的执行效率、降低执行费用受到广泛关注。用户期望的局部QoS约束与工作流的总体执行效率之间往往存在矛盾。针对该现象,在前期的研究基础上提出一种允许违反局部时间约束的科学工作流调度策略。通过对已聚簇的工作流任务集使用任务后向优先合并的方法,可实现任务间空闲时间片的合理利用,进而优化科学工作流的执行时间;另外,为充分利用任务的松弛时间,提高工作流的整体执行效率,允许部分任务的调度违反局部最晚完成时间的约束。实验结果表明,该策略能提前科学工作流的最早完成时间,提高处理机的利用率,并最终降低工作流的执行费用。 相似文献
16.
Giovanni Cesaroni 《International Transactions in Operational Research》2011,18(2):205-229
In a multiple input–output setting, we offer an example of a full‐blown efficiency analysis based on the free disposal hull assumption of a non‐convex technology. On a cross section of 92 units, for the time period 2006–2007, we measure technical and allocative efficiency, cost efficiency, as well as returns to scale and technical progress. Furthermore, by introducing a new cost‐efficiency measure that is corrected for differences in the scale of operations (average cost efficiency), we are able to obtain an estimate of cost reductions ensuing from network restructuring based on optimal scale sizes. A detailed regional analysis of results is presented. Differences in efficiency scores, ascertained across space and time, are assessed by means of non‐parametric inference testing. The input ratio is found not to be statistically correlated with cost‐efficiency scores. Local provision of public services at a provincial level results in a considerable amount of average cost inefficiency. 相似文献
17.
18.
针对不完备信息系统变化时缺失值获取具体属性值的特性,为解决多粒度粗糙集中更新近似集时间效率低的问题,提出了一种基于容差关系的近似集动态更新算法。首先,讨论了基于容差关系的近似集变化的性质,并根据相关性质得出乐观、悲观多粒度粗糙集的近似集的变化趋势;然后,针对更新容差类效率低的问题,提出了动态更新容差类的定理;最后,在此基础上,设计出基于容差关系的近似集动态更新算法。采用UCI数据库中4个数据集进行仿真实验,当数据集变大时,所提更新算法的计算时间远小于静态更新算法的计算时间,即所提动态更新算法的时间效率高于静态算法,验证了所提算法的正确性和高效性。 相似文献
19.
20.
时间序列的相似性度量是时间序列数据挖掘的研究基础,为数据挖掘任务的效率和准确度提供可靠的保障。提出一种时间序列的层次分段及相似性度量方法,方法首先识别时间序列中的极值点,依据极值点的特征对时间序列进行分层次分段,并以此为基础,通过定义新的距离公式来度量时间序列间的相似性。使用新提出的相似性度量方法对时间序列进行聚类计算,实验结果表明,该方法能够有效地度量时间序列间的相似性,聚类效果明显,具有较好的实用性和良好的应用前景。 相似文献