基于HTML5的混沌系统的数字化实现

为产生伪随机数字混沌序列,提出了一种新的混沌系统数字化实现方法,该方法采用HTML5技术实现连续混沌系统的离散和迭代运算;基于数字混沌序列和线性插值算法实现了混沌吸引子相图、时间序列的绘制。该方法具有跨平台使用特性、本地储存特性和渲染模式,为把混沌技术的应用植入浏览器提供了可能,该方法可应用于多平台共享的混沌信息加密、混沌演示、混沌性能测试等领域。     

基于最小二乘支持向量机对称性的混沌时间序列预测

利用最小二乘支持向量机的对称性约束条件挖掘混沌时间序列的对称性,分析混沌系统固有的对称特性,提出一种对称性最小二乘支持向量机的混沌时间序列预测方法。该方法将混沌系统的对称性作为先验知识嵌入预测模型,Lorenz系统的仿真结果表明该方法不仅能够精确地预测混沌时间序列,而且扩展了混沌系统的预测空间,这一结论预示着最小二乘支持向量机是一种研究混沌时间序列的有效方法。     

几种混沌序列生成器的比较分析

给出性能较好的混沌序列生成器,并将其生成二值序列的方法进行了改进。在此,将几种常用的混沌序列生成器进行比较分析。Logistic映射和Hybrid映射是两种较好的混沌映射。混沌序列具有易生成性,对初始条件强敏感性,可完全重现性等特点,基于以上特性,很多的图像置乱加密算法都采用了混沌序列。     

混沌扩频序列产生器

本文给出了基于一类混沌映射的扩频序列产生方法,运用混沌的遍历理论分析了周期趋于无穷时混沌扩频序列的性能,并对实际性能作了计算机模拟。结果显示,混沌扩频序列具有良好的平衡特性、相关特性和理想的线性复杂度,且数量极多,是直接序列扩频通信的优选序列。     

混沌扩频序列产生器

本文给出了基于一类混沌映射的扩频序列进行产生方法，运用混沌的遍历理论分析了周期趋于无穷时混沌扩频序列的性能，并对实际性能作了计算机模拟，结果显示，混沌扩频序列具有良好的平衡特性，相关特性和理想的线性复杂度，且数量极多，是直接序列扩频通信的优选序列。     

基于混沌理论的煤矿监控网络流量时间序列的预测

针对目前煤矿监控网络的流量增大趋势,为了改进和提高网络的QoS质量,提出了基于混沌时间序列预测网络流量的方法.从相空间重构,用互信息量法和虚假临近点法确定了延迟时间和嵌入维数,用小数据量法求解了最大Lyapunov指数,由此证明了网络流量时间序列的混沌特性,并且建立相应模型,成功地对其做出了预测.仿真结果表明,该方法具有较高的准确度.     

一类混沌映射扩频序列的研究

Logistic混沌映射可产生用于扩频系统的跳频序列。该文用Logistic映射构造了一个二维混沌映射,证明了该二维混沌映射轨道点的概率密度分布,提出了一种混沌跳频序列的产生方法,并通过数值仿真分析了此类扩频序列的奇、偶相关特性和序列码的平衡特性.结果表明:该混沌跳频序列具有良好的性能。     

Logistic数字混沌序列性能分析

混沌作为一种非线性动态系统中的现象,受到了人们的重视,研究工作者纷纷探索他在通信中的可能应用。讨论了一种广泛研究的离散时间动态系统Logistic Map所产生的数字混沌序列,通过与m序列比较,分析了其白噪声统计特性,并用计算机进行仿真,做了相应的实验数据分析。结果表明数字混沌序列具有较理想的自相关和互相关特性,且数目极大,是CDMA系统中扩频码的优选码型。     

航向数据混沌特性分析及预测

惯导系统输出航向数据具有混沌特性,应用混沌理论对其进行分析,采用C-C方法重构相空间,在此基础上分别通过定性与定量方式分析其混沌特性并计算最大Lyapunov指数。以相空间重构后的时间序列为变量输入,采用RBF神经网络预测航向数据,结果表明其预测精度优于未经相空间重构的直接预测法。     

一种新颖的混沌时间序列分析方法

本文提出了一种新颖的混沌时间序列分析方法,即从被加性高斯白噪声污染的混沌时间序列中估计其系统参数并同时进行噪声抑制的方法。假定产生混沌时间序列的模型已知,但相应的参数未知。这种新方法把对混沌时间序列的参数估计和噪声抑制看作是一种最小化过程,并利用了最速梯度下降方法解决。数值模拟实验表明新方法要优于现有的方法,是估计混沌系统系数和噪声抑制的一种有效的方法。     

RECENT PROGRESS IN MULTI—BEAM KLYSTRON IN IECAS

Recent research progresses in Multi-Beam Klystron(MBK)in IECAS are briefly introduced in the letter,The S-band MBKs of IECAs have peak power of 120-250kW,average power of 4-9kW,efficiency of 35-45%,gain of 41-46dB.beam voltage of 15-19kV,and weight of 40-45kg.Some key technical problem of MBK are also described and discussed.Among them,improving the design of MBK to botain the required bandwidth,raising beam transmission to increase average power,eliminating oscillation and spray spectrum,overcoming window breakdown caused by magic mode,reducing breakdown times of electron gun,are most important things for the practical MBK.Besides,further research owrk in MBK in IECAS is commented.     

Recent advancements in surface plasmon polaritons-plasmonics in subwavelength structures in microwave and terahertz regimes

This paper presents a review of recent investigational studies on exciting Surface Plasmon Polaritons (SPPs) in MicroWave (MW) and TeraHertZ (THz) regimes by using subwavelength corrugated patterns on conductive or metal surfaces. This article also describes SPP Microstrip (MS) structures at microwave and terahertz frequencies, and compares their significance with that of conventional MS Transmission Lines (TL), in order to tackle the key challenges of high gain, bandwidth size, compactness, TL losses, and signal integrity in high-end electronic devices. Because they have subwavelength properties, surface plasmon polaritons are gaining attention for their improved performance and ability for miniaturization in high-speed dense circuits. They possess comparably minuscule wavelength compared to incident light (photons). Consequently, they can demonstrate stronger spatial confinement and higher local field intensity at optical frequencies. In addition to engineering spoof SPP waveguides, which are created by engraving grooves and slits on metal surfaces to allow operation on at low frequencies (microwave and terahertz), semiconductors with smaller permittivity values and thus lower free charge carrier concentration have been demonstrated as a potential candidate in plasmonic devices. If necessary, further tuning of semiconductor-based SPP structures is aided by controlling the charge carrier concentration through doping, or by external stimuli such as optical illumination or thermal excitation of charge carriers from valence to conduction bands. This article conclusively covers previously elucidated perspectives on manipulating SSPPs in the MW and THz ranges, and emphasizes how these could steer next-generation plasmonic devices.     

Progress in electrophotography in Western Europe

A review is given of the progress in electrophotographic science and technology in Western Europe during the years 1967 to early 1971. University research work is mainly directed towards two areas: 1) the electrical and physical properties of photoconductors, such as selenium, chalcogenides, oxides, and organic materials; and 2) the sensitization of these photoconductors. Industrial research teams report on the preparation of electrophotographic layers on development and on image evaluation. A bibliography including scientific papers and patents published on this subject during said period completes this review.     

Moisture diffusion in poltimide films in integrated circuits

This paper reports the use of planar aluminum-PI-aluminum capacitors, in which the variation of low frequency dielectric permittivity is shown to be proportional to absorbed moisture, to carry out in-situ studies of moisture uptake and diffusion in PMDA-ODA device-grade polyimide films. It is found that the equilibrium amount of moisture uptake depends on ambient relative humidity in the temperature range 20-80‡C, and that the diffusion kinetics obey a Fickian model with a diffusion coefficient in the range 3-5 x 10^-9 cm² /sec at room temperature. The diffusion coefficient is temperature dependent, with an activation energy of 0.32-0.34 eV, and is weakly dependent on absorbed moisture at fixed temperature. An asymmetry is observed between absorption and desorption kinetics which correlates with the moisture-dependent diffusion coefficient.     

WCDMA和TD-SCDMA中HSDPA的比较

高速下行分组接入(HSDPA)技术是针对第三代移动通信系统上、下行链路业务量不平衡的特点提出的,能够大幅提高下行传输速率。在R5版本中WCDMA和TD-SCDMA分别引入了HSDPA。两系统中的HSDPA技术在MAC层、物理层和技术上有一致性,但同时二者在物理层信令参数、物理信道种类、时隙调整、技术和整体性能上存在着一些差异,而差异的产生源于WCDMA和TD-SCDMA系统本身特点的不同。主要阐述了WCDMA和TD-SCDMA HSDPA的异同,并进行分析。     

532激光在倒睫中的应用体会

目的：探讨532激光在倒睫治疗中的应用。方法：利用532激光对黑色素的高吸收性,对40例（50只眼）倒睫进行激光治疗,并跟踪随访3月。结果：532激光治疗倒睫有效且安全。     

Advances in Developing Transitions in Microwave Integrated Circuits

Advances in developing transitions in microwave integrated circuits during the last ten years are reviewed. Some typical structures of transition are introduced, Transition structures can be classified into two basic types: one is transition between the same ]rind of transmission lines on different planes of a common substrate, the other transition between different types of transmission lines.Furthermore, future development of transition structures is discussed.     

我国铁电液晶材料研究进展

自从Clark与Lagerwall提出表面双稳铁电液晶显示原理后，铁电液晶材料在显示领域中的应用一直是国内外研究的热点课题，总结了国内外近年来铁电液晶材料的合成与研究工作和目前在显示领域应用中遇到的问题，并阐述了在其他领域的应用前景。     

DDN网在惠州市电信业务中的应用

本文介绍了ＤＤＮ的基本结构和作用，分析了ＤＤＮ设备的几个特点，指出了ＤＤＮ在惠州市电信业务中的几种主要的应用，最后还指出了ＤＤＮ设备使用中存在的问题。     

模电教学中的形象思维

阐述了形象思维在认识客观世界时的重要作用,同时以大量的实例说明形象思维在模电课程中的应用,并论述了如何在模电教学中利用形象思维提高教学质量,同时培养学生的形象思维能力。