主动干扰辅助下的无人机隐蔽通信功率与位置联合优化

利用友好干扰节点发送人工噪声是无线隐蔽通信中一种常见实现方法,可以增加监听者做出判断的不确定性,从而实现隐蔽传输。为此,考虑在无人机隐蔽通信网络中,部署一个空中的友好干扰节点,发射人工噪声干扰地面监听者的检测。对无人机与地面用户之间实现无线隐蔽传输进行了研究,分析了其有效隐蔽性能,联合优化了2架无人机的发送功率和位置部署以最大化隐蔽传输速率,使用粒子群优化算法与功率位置交替迭代算法2种优化方法得到最优的无人机部署位置及功率分配方案。仿真结果表明,联合优化方案相比于固定位置只优化功率的基准方案可以显著地提高系统隐蔽传输性能,且交替迭代算法所得结果要优于粒子群优化算法。     

存在辅助节点的MIMO窃听信道安全性能研究

为了提高MIMO窃听信道的可达安全速率,提出了基于广义奇异值分解的合作干扰策略。该策略中源节点和辅助节点同时采用基于广义奇异值分解的波束形成技术,源节点发送消息信号,辅助节点发送独立于消息信号的噪声信号,噪声信号对目的节点和窃听节点都产生干扰。此外设计了源节点和辅助节点采用合作干扰策略时的联合最优功率分配算法。该算法可以实现源节点和辅助节点在总功率受限时的可达安全速率最大化。仿真结果表明,与现有的非合作最优功率分配算法相比,本文提出的合作干扰策略在大信噪比时可以显著提高系统的可达安全速率。      

基于链路间干扰辅助的中继D2D系统安全通信方法

在包含中继节点的D2D(Device-to-Device)系统中,针对蜂窝链路与D2D链路同时受窃听的问题,提出一种基于链路间干扰辅助的中继D2D系统安全通信方法.首先,确定蜂窝链路与D2D链路上下行发送模式;然后,在基站与中继节点的发送信号中添加人工噪声,协作干扰窃听者;最后,对基站功率分配与D2D功率控制进行了优化,以实现不同类型链路间干扰辅助保障系统安全.仿真结果表明,所提出的安全通信方法在保密速率方面比SVD(Singular Value Decomposition)与ZF(Zero-Forcing)预编码方法提高了1.5bit/s/Hz.     

基于相对移动性预测的k跳AdHoc网络分簇算法

针对网络节点随机移动造成的AdHoc网络分簇结构变化和路由失效问题,该文提出一种基于相对移动性预测的k跳分簇算法,分析和预测网络节点运动状态,自适应地调整分簇结构,提高簇结构稳定性。首先,使用多普勒频移计算节点间相对移动速度,预测节点移动性,得到节点间链路保持时间。然后,在簇形成阶段,采用面向节点稳定性的MAX-MIN启发式算法,根据节点的平均链路保持时间对簇首进行选择。进而,在簇保持阶段,提出一种基于节点运动状态的网络自适应调整算法,一方面调整节点信息数据发送周期以平衡数据开销和精确度,另一方面通过预测节点间链路通断情况调整分簇结构,以减少链路失效时的链路重建时间,提高网络运行质量。仿真实验表明,所提算法可以有效延长簇首持续时间,提高簇结构在动态环境下的稳定性。     

多跳AdHoc网络中支持MIMO的分布式拓扑未知时分多址接入协议的研究与分析

针对Ad Hoc网络和MIMO的有效结合,提出了适于多跳Ad Hoc网络的支持MIMO的分布式拓扑未知时分多址接入协议.该协议通过有限域无线网络设计算法在每帧给每个节点分配时隙且无需知道全网拓扑信息,这极大地减小了收集全网拓扑信息的开销.通过预约,每个节点在其分配的无干扰时隙并行发送MIMO链路的所有数据流,并在与其他节点共享的时隙发送MIMO链路的一部份数据流来解决传输冲突.同时推导出保证通过率和最佳帧长.结果显示动态分配MIMO的传输容量和抗干扰能力会极大地提高通过率.     

多簇无线传感网的优化生存时间近邻功率控制算法

针对非均匀分布的无线传感网的生存时间问题,提出多簇无线传感网的优化生存时间近邻功率控制(NPCAOL_MC)算法。该算法采用K-means算法确定网络的簇个数和对应每个簇的节点,利用近邻算法评估每个簇的节点密度,确定簇的最优通信距离。结合Friss自由空间模型计算当前簇的最优发送功率。Sink节点广播通知其他节点,如果是同一簇内的节点相互通信,则采用簇最优功率发送数据,否则采用默认最大发送功率发送数据。仿真结果表明,利用NPCAOL_MC算法可以分析整个网络节点的位置信息,采用簇最优发送功率发送数据,从而提高生存时间,并使能耗经济有效。在密度分布不均的无线传感网中,NPCAOL_MC比采用固定发送功率的Ratio_w算法更优。     

一种高能效低时延的LLN路由修复算法

由于低功耗有损网络(LLN)中无线链路的不稳定性和有损性,外部环境的干扰极易导致网络出现故障,从而严重影响网络性能,而LLN网络中现有路由修复算法存在控制开销冗余和修复时延较大等问题。为此,提出了一种高能效低时延的LLN路由修复算法(EELDR-RPL)。该算法通过采用“零额外控制开销通告链路故障及邻居节点信息”机制,使得链路故障节点的子节点能够及时获知链路故障以及链路故障节点的邻居情况;通过采用“自适应调整节点网络深度值”机制,使得链路故障节点能够快速地重新接入网络;通过采用“链路故障节点子节点自适应切换”机制,能够达到优化网络拓扑的目的。仿真结果表明,与现有路由修复算法相比,EELDR-RPL算法能够有效地降低路由修复时延和减少控制开销。     

储能-发送模式的单天线两跳中继系统保密速率的优化

该文研究节点具有能量收集能力的两跳中继系统的物理层安全传输方案。考虑窃听节点与源和中继节点间都有直接链路的情况。每个数据传输时隙分为能量收集和数据传输两个阶段,各节点用收集的能量发送信号。中继采用放大转发方式,目的节点发送人工噪声进行协作干扰,保护在两跳传输中传输的保密信息。以最大化保密速率为目标,采用迭代算法优化能量吸收和数据传输两阶段的时间分配比例系数和协作干扰功率分配因子。仿真结果表明优化算法准确,优化后的协作干扰方案能显著提高系统的保密传输速率。由于考虑了窃听节点在两跳传输中都能接收到信号的可能性,文中方案更贴近实际,并解决了一个复杂的优化问题。     

无线mesh网络中基于效用最优的联合信道分配和功率分配算法

该文针对多信道无线mesh网络,采用基于效用最优的定价机制,提出了一种功率-干扰价格模型,并基于该模型提出了一种分布式联合信道分配和功率分配算法。每个节点根据自己所消耗功率状况合理地定功率价格,并根据自己所受干扰状况合理地定干扰价格。通过功率价格和干扰价格来调节链路的信道分配和功率分配,使网络效用最大化。仿真结果表明:所提出的算法能够快速、平稳地收敛到近似最优解。同时还仿真了网络可用信道数目、节点射频数目和功率对系统性能的影响,可以为网络配置提供参考。     

认知网络中基于中继的频谱资源分配

根据无线认知中继网络上、下行链路子载波的信道特性,研究认知网络的频谱资源分配,提出一种上、下行链路子载波联合优化的分配算法。该算法根据子信道增益差值因子的大小分配下行链路子载波,以源节点和中继节点功率最小化为优化目标配对上行链路子载波,以用户的实时需求分配子载波的比特和功率,有效降低了系统的发射功率,提高了系统吞吐量。仿真结果表明,与启发—集中式和分布式辅助反馈传输功率分配算法比较,该联合优化算法的单位比特功耗降低了1.5~3 dBμW,误比特率性能提高了1个数量级左右。     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.     

GaAsSb/InAlAs PA DHBTs Grown by Production MBE

The epi material growth of GaAsSb based DHBTs with InAlAs emitters are investigated using a 4 × 100mm multi-wafer production Riber 49 MBE reactor fully equipped with real-time in-situ sensors including an absorption band edge spectroscope and an optical-based flux monitor. The state-of-the-art hole mobilities are obtained from 100nm thick carbon-doped GaAsSb. A Sb composition variation of less than ± 0.1 atomic percent across a 4 × 100mm platen configuration has been achieved. The large area InAlAs/GaAsSb/InP DHBT device demonstrates excellent DC characteristics,such as BVCEO＞6V and a DC current gain of 45 at 1kA/cm2 for an emitter size of 50μm × 50μm. The devices have a 40nm thick GaAsSb base with p-doping of 4. 5 × 1019cm-3 . Devices with an emitter size of 4μm × 30μm have a current gain variation less than 2% across the fully processed 100mm wafer. ft and fmax are over 50GHz,with a power efficiency of 50% ,which are comparable to standard power GaAs HBT results. These results demonstrate the potential application of GaAsSb/InP DHBT for power amplifiers and the feasibility of multi-wafer MBE for mass production of GaAsSb-based HBTs.     

Influence of polarization extinction ratio on distributed polarization coupling detection

Distributed polarization coupling in polarization-maintaining fibers can be detected by using a white light Michelson interferometer. This technique usually requires that only one polarization mode is excited. However, in practical measurement, the injection polarization direction could not be exactly aligned to one of the principal axes of the PMF, so the influence of the polarization extinction ratio should be considered. Based on the polarization coupling theory, the influence of the incident polarization extinction on the measurement result is evaluated and analyzed, and a method for distributed polarization coupling detection is developed when both two orthogonal eigenmodes are excited.     

Noise character analysis and the restraint of self-pulsation laser diodes

We calculate the Langevin noise sources of self-pulsation laser diodes, analyze the effects of active region noise and saturable-absorption region noise on the power fluctuation as well as period fluctuation, and propose a novel method to restrain the noise effects. A visible SIMULINK model is established to simulate the system, The results indicate that the effects of noise in absorption region can be ignored; that with the increase of DC injecting current, the noise effects enhance power jitter, and nevertheless, the period jitter is decreased; and that with external sinusoidal current modulating the self-pulsation laser diode, the noise-induced power jitter and period jitter can be suppressed greatly. This work is valuable for clock recovery in all-optical network.     

High-quality single-crystal CdSe nanoribbons and their optical properties

Large-scale synthesis of single-crystal CdSe nanoribbons is achieved by a modified thermal evaporation method, in which two-step-thermal-evaporation is used to control CdSe sources＇ evaporation. The synthesized CdSe nanoribbons are usually several micrometers in width, 50 nm in thickness, and tens to several hundred micrometers in length. Studies have shown that high-quality CdSe nanoribbons with regular shapes can be obtained by this method. Room-temperature photolumines-cence indicates that the lasing emission at 710 nm has been observed under optical pumping （266 nm） at power densities of 25-153 kW/cm^2. The full width half maximum （FWHM） of the lasing mode is 0.67 nm     

Propagation of hermite-cosh-gaussian beams passing through ABCD optical system with an annular aperture

By using the expansion of the aperture function into a finte sum of complex Gaussian functions, the corresponding analytical expressions of Hermite-cosh-Gaussian beams passing through annular apertured paraxially and symmetrically optical systems written in terms of ABCD matrix were derived, and they could reduce to the cases with squared aperture. In a similar way, the corresponding analytical expressions of cosh-Gaussian beams through annular apertured ABCD matrix were also given. The method could save more calculation time than that by using the diffraction integral formula directly.     

中国建立EB级存储实验室,致力云计算应用(英文)

正With the support of 863 programs,Sugon Information Industry Co.,Ltd.,set up a dawning EB-class storage laboratory to address massive data storage requirements and largescale cloud computing demonstration applications.The Dawning EB-class cloud storage system adopts advanced fault-tolerant architecture,efficient data fault-tolerant algorithms with user authentication and data encryption policies to deal with the"lost""wrong"and"stolen"problems of data for ensuring the reliability and safety of the EB-class storage system in the public network application environments.The Dawning EB-class Storage Laboratory taking advan-