PEDOT/PSS类复合膜的湿敏性能研究

本文通过在聚3,4-乙烯二氧噻吩(PEDOT)导电高分子中引入可溶性高分子聚电解质聚对苯乙烯磺酸钠(PSS),对苯乙烯磺酸钠(SSNa),烯丙基磺酸钠(SAS),丙烯酸丁酯(BA)和苯乙烯(St)等,制备了PEDOT/PSS、PEDOT/P(SSNa-SAS)和PEDOT/P(SSNa-BA-St)三种复合膜,并比较了三者的感湿特性。结果表明:在11%-97%湿度范围内三者都表现出了较高的灵敏度,但在相同条件下,PEDOT/P (SSNa-SAS)和PEDOT/P(SSNa-BA-St)的阻值都比PEDOT/PSS膜小2-3个数量级,并且PEDOT/P(SSNa-BA-St)的线性响应度比PEDOT/P(SSNa-SAS)高8.2%。     

PEDOT:PSS导电自支撑薄膜的合成与表征

以3,4-乙烯二氧噻吩(EDOT)为原料,聚对苯乙烯磺酸钠(PSS-Na)为分散剂和掺杂剂,通过化学氧化合成法在水体系中聚合制备了聚(3,4-乙烯二氧噻吩):聚苯乙烯磺酸(PEDOT:PSS)悬浮液,通过真空抽滤法制备了PEDOT:PSS自支撑柔性导电薄膜。通过FTIR、UV-Vis对聚合产物结构进行了表征与确证,通过四探针电导率测试、SEM、拉伸断裂强度测试对PEDOT:PSS薄膜的导电性、微观形貌与力学性能进行了表征。结果表明,成功制备了PEDOT:PSS目标产物,在氧化剂过硫酸铵与单体EDOT物质的量比为0.875时达到最佳电导率(19.19 S/cm)。自支撑薄膜厚度约18μm,在25℃,40%～60%相对湿度范围内拉伸强度达到45～60MPa,具有良好的导电性与机械性能。     

PEDOT:PSS导电自支撑薄膜的合成与制备

以3,4-乙烯二氧噻吩（EDOT）为原料，聚对苯乙烯磺酸钠（PSS-Na）为分散剂和掺杂剂，通过化学氧化合成法在水体系中聚合制备了聚(3,4-乙烯二氧噻吩):聚苯乙烯磺酸（PEDOT:PSS）悬浮液，通过真空抽滤的方法制备了PEDOT:PSS自支撑柔性导电薄膜。通过FTIR、UV-Vis对聚合产物结构进行了表征与确认，通过四探针电导率测试、SEM、拉伸断裂强度测试对PEDOT:PSS薄膜的导电性、微观形貌与力学性能进行了表征。结果表明，成功制备了PEDOT:PSS目标产物，在氧化剂与单体物质的量之比为0.875时达到最佳电导率（19.19 S/cm）。自支撑薄膜厚度约18 μm，在25 ℃，40%~60%相对湿度范围内拉伸断裂强度达到45~60 MPa，具有良好的导电性与机械性能。     

NIPAM改性PEDOT:PSS导电聚合物的制备及在电致变色器件中的应用

以柔性疏水小分子N-异丙基丙烯酰胺（NIPAM）对聚苯乙烯磺酸盐（PSS）进行共聚改性，制备了一系列聚[(苯乙烯磺酸盐)-共-异丙基丙烯酰胺][P(SS-co-NIPAM)]，并以其为模板采用氧化聚合法与3,4-乙烯二氧噻吩（EDOT）制备了导电聚合物PEDOT:P(SS-co-NIPAM)。与PEDOT:PSS薄膜相比，NIPAM摩尔分数（以对苯乙烯磺酸钠物质的量为基准，下同）为15%时，PEDOT:P(SS-co-NIPAM)薄膜平均透光率保持在80%左右，水接触角从18.5°增至39.0°，疏水性提高，并且弯曲1000次后方阻变化量为5.71 kΩ/sq，远小于PEDOT:PSS薄膜（10.60 kΩ/sq）。以NIPAM摩尔分数为15%的PEDOT:P(SS-co-NIPAM)薄膜作为离子储存层的电致变色器件的光学对比度（ΔT）为9.83%，循环800次后ΔT仍达到9.55%，衰减量为0.28%，衰减量与PEDOT:PSS器件相当，说明NIPAM共聚改性能改善PEDOT:PSS导电聚合物的柔韧性和疏水性，以其作为离子储存层的器件可维持优异的电致变色性能。     

PEDOT/石墨烯复合材料的制备及其抗静电性能研究

采用原位聚合法,以氧化石墨烯(GO)为掺杂剂,将3,4-乙烯二氧噻吩(EDOT)原位聚合在氧化石墨烯的表面,制备了部分还原氧化石墨烯/聚3,4-乙烯二氧噻吩(rGO/PEDOT)导电复合材料。实验表明:当m(EDOT):m(GO)=1:1时制备的复合材料具有良好的水分散性,电导率为2.56S/cm。用全反射红外光谱和拉曼光谱对其结构进行了表征,并使用透射电镜(TEM)对复合材料在水中的分散性进行了表征。结果表明:PEDOT成功聚合在GO的表面上,且PEDOT的聚合使氧化石墨烯得到了部分还原。将复合材料作为导电填料加入到水性聚氨酯中,测试了涂层的抗静电性、机械性能和热稳定性,在添加量为10%时,涂层的综合性能较好,涂层表面电阻可达1.27×10~9Ω。     

3,4-二氧乙基噻吩及其聚合物的制备与应用进展

聚(3,4-二氧乙基噻吩)(PEDOT)是目前发现的导电态最稳定的导电高分子之一,对聚PEDOT及其单体3,4-二氧乙基噻吩(EDOT)的制备方法进行了综述,并介绍了PEDOT在抗静电、电解电容器、有机光电材料和传感器领域的研究和应用。     

聚3,4-乙烯二氧噻吩/聚苯胺复合材料的制备与性能

以过硫酸铵(APS)和FeCl3为复合氧化剂,采用原位化学氧化聚合法合成了导电聚3,4-乙烯二氧噻吩/聚苯胺(PEDOT/PANI)复合材料,研究了苯胺浓度及加入时间、复合氧化剂配比和复合乳化剂配比对复合材料性能的影响,并对复合材料进行了分析. 结果表明,PEDOT/PANI复合材料合成的较佳工艺条件为：3,4-乙烯二氧噻(EDOT) 0.6 mol/L、复合氧化剂 0.6 mol/L(FeCl3:APS=1:2, mol)、复合乳化剂 0.4 mol/L(SDBS:CTAB=2:3, mol)、复合掺杂剂1.2 mol/L(H2SO4:SSA=4:1, mol)及苯胺0.8 mol/L, EDOT聚合2 h后加入苯胺溶液继续反应8 h. 复合材料的导电性、结晶性和热稳定性比纯导电聚合物好.     

热固化抗静电涂料的制备及性能研究

以聚苯乙烯磺酸钠(PSS)为掺杂剂,过硫酸钠(Na_2S_2O_8)、硫酸铁[Fe_2(SO_4)_3]为氧化剂,聚乙二醇(PEG)为非离子扩散剂,采用氧化EDOT(3,4-乙烯二氧噻吩)法制备水溶性抗静电剂PEDOT(聚3,4-乙烯二氧噻吩);然后加入水性聚氨酯(WPU)分散液(作为基体树脂),制备出热固化的绿色环保型抗静电涂料。研究结果表明:当m(PSS)∶m(EDOT)=2.5∶1、反应时间为18 h、n(—NCO)∶n(—OH)=2.2∶1、w(PEG)=12%(相对于WPU分散液总质量而言)和m(PEDOT)∶m(WPU)=7∶3时,制得的抗静电涂层具有透光率(94.8%)高、表面电阻率(0.022 MΩ)低和耐水性佳等特点。     

聚(3,4-乙撑二氧噻吩)/木质素磺酸核壳粒子的制备工艺优化

以过硫酸钠为氧化剂,在木质素磺酸(LS)水溶液中通过化学氧化法聚合3,4-乙撑二氧噻吩(PEDOT),制备聚(3,4-乙撑二氧噻吩)/木质素磺酸(PEDOT/LS)水分散液。研究了木质素磺酸用量、氧化剂添加量、p H值、固含量和反应温度对产物PEDOT/LS的粒径及导电性的影响。实验得出较佳的反应条件是:木质素磺酸与EDOT单体质量比为2.0~2.5:1,氧化剂与EDOT摩尔比为1.3:1,反应体系p H值约1.5,固含量在1.8%~2.5%,反应温度10~20℃。用PEDOT/LS配制得到的涂层,表面电阻小于108??sq?1,光滑透明且附着力达到二级,满足抗静电剂的要求。     

3,4-乙撑二氧噻吩合成及其聚合物应用进展

3,4-乙撑二氧噻吩(EDOT)是导电聚合物——聚3,4-乙撑二氧噻吩(PEDOT)的单体。目前，国内EDOT的产量和品质等方面较国外有较大差距。因此，对EDOT的合成工艺进行深入研究有着重要的社会和经济效益。总结了EDOT的主要合成方法及其聚合物在防腐蚀涂层、超级电容器、钙钛矿太阳能电池、水凝胶等领域的应用与发展。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Many Drugs of Abuse May Be Acutely Transformed to Dopamine,Norepinephrine and Epinephrine In Vivo

It is well established that a wide range of drugs of abuse acutely boost the signaling of the sympathetic nervous system and the hypothalamic–pituitary–adrenal (HPA) axis, where norepinephrine and epinephrine are major output molecules. This stimulatory effect is accompanied by such symptoms as elevated heart rate and blood pressure, more rapid breathing, increased body temperature and sweating, and pupillary dilation, as well as the intoxicating or euphoric subjective properties of the drug. While many drugs of abuse are thought to achieve their intoxicating effects by modulating the monoaminergic neurotransmitter systems (i.e., serotonin, norepinephrine, dopamine) by binding to these receptors or otherwise affecting their synaptic signaling, this paper puts forth the hypothesis that many of these drugs are actually acutely converted to catecholamines (dopamine, norepinephrine, epinephrine) in vivo, in addition to transformation to their known metabolites. In this manner, a range of stimulants, opioids, and psychedelics (as well as alcohol) may partially achieve their intoxicating properties, as well as side effects, due to this putative transformation to catecholamines. If this hypothesis is correct, it would alter our understanding of the basic biosynthetic pathways for generating these important signaling molecules, while also modifying our view of the neural substrates underlying substance abuse and dependence, including psychological stress-induced relapse. Importantly, there is a direct way to test the overarching hypothesis: administer (either centrally or peripherally) stable isotope versions of these drugs to model organisms such as rodents (or even to humans) and then use liquid chromatography-mass spectrometry to determine if the labeled drug is converted to labeled catecholamines in brain, blood plasma, or urine samples.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料，介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比，介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序，对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。     

Inorganic/organic nanocomposite coatings: The next step in coating performance

Inorganic/organic hybrid materials have considerable promise and are beginning to become a major area of research for many coating usages, including abrasion and corrosion resistance. Our primary approach is to prepare the inorganic phase in situ within the film formation process of the organic phase. The inorganic phase is introduced via sol-gel chemistry into a thermosetting organic phase. By this method, the size, periodicity, spatial positioning, and density of the inorganic phase can be controlled. An important aspect of the inorganic/organic hybrid materials is the coupling agent. The initial task of the coupling agent is to provide uniform mixing of the oligomeric organic phase with the sol-gel precursors, which are otherwise immiscible. UV-curable inorganic/organic hybrid systems have the advantages of a rapid cure and the ability to be used on heat sensitive substrates such as molded plastics. Also, it is possible to have better control of the growth of the inorganic phase using UV curing. It is our ultimate goal to completely separate the curing of inorganic and organic phases to gain complete control over the morphology, and hence optimization of “all” the coating properties. Thus far, it has been found that concomitant UV curing of the inorganic and organic phases using titanium sol-gel precursors afforded nanocomposite coatings which completely block the substrate from UV light while maintaining a transparent to visible light. Also, it has been found that the morphology of the inorganic phase is highly dependent on the concentration and reactivity of the coupling agent. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.