共查询到20条相似文献,搜索用时 312 毫秒
1.
2.
以自制La2O3/Mg O固体碱为催化剂,采用脂肪酸甲酯甘油解合成单甘酯;采用薄层色谱、柱色谱、FTIR、1HNMR对产品进行了分离和鉴定;考察了反应温度、甘油与脂肪酸甲酯投料比、反应时间以及催化剂用量对单甘酯产率的影响。结果表明,合成产物单甘酯的红外光谱图与其标准品红外谱图相符;1HNMR数据表明,产品单甘酯为亚油酸单甘酯和棕榈酸单甘酯的混合物;合成单甘酯的最适宜条件为:反应温度240℃,催化剂添加量0.75%(以脂肪酸甲酯质量计),投料比n(甘油)∶n(脂肪酸甲酯)=2∶1,反应时间2.5 h;在该条件下单甘酯产率达70.53%。 相似文献
3.
利用响应面法对无溶剂体系中假丝酵毋99-125脂肪酶-β环糊精复合物催化甘油、油酸酯化反应合成单甘酯、双甘酯的反应条件进行了优化.选取催化剂添加量、醉酸物质的量比、搅拌转速、反应初始加水量、β-环糊精添加量、温度等6个因素作为连续变量,反应时间作为不确定变量进行,卜心组份星型设计,以单甘酯、双甘酯、三甘酯、脂肪酸为响应... 相似文献
4.
通过衣康酸与甲氧基聚乙二醇进行直接酯化反应,生成了一种具有反应活性的新型聚羧酸盐减水剂中间大分子单体—甲氧基聚乙二醇衣康酸单酯。探讨了酸醇比、催化剂用量、阻聚剂用量、带水剂用量等实验条件对酯化反应的影响,并对酯化产物进行了红外光谱分析和凝胶色谱分析,得出了合成甲氧基聚乙二醇衣康酸单酯的最佳合成工艺。 相似文献
5.
合成单脂肪酸甘油酯的进展 总被引:4,自引:0,他引:4
介绍了近年来合成单脂肪酸甘油酯的各种方法。认为通过直接酯化法和甘油醇解法只能得到低纯度的单甘酯 ,采用基团保护法、环氧氯丙烷法和缩水甘油法可合成高纯度单甘酯 ,其中基团保护法具有操作简便 ,产品易分离的优点 ,是制备高纯度单甘酯最有用的方法。 相似文献
6.
本文采用了硼酸酯化法合成了聚乙二醇(1700)单硬脂酸酯。通过四因素四水平的正交试验,考察了硼酸酯化时间(A)、催化剂浓度(B)、酯交换时间(C)及水解时间(D)四种因素对产物单酯收率及酸值的影响,确定了聚乙二醇(1700)单硬脂酸酯的最佳合成条件,得到的单酯收率为80%。 相似文献
7.
分别用十二醇、十四醇、十六醇和十八醇与邻苯二甲酸酐反应合成邻苯二甲酸单醇酯,再用氢氧化钠中和得钠盐。研究了催化剂、醇、原料配比、酯化温度及溶剂等对单酯酯化率的影响,用红外光谱和核磁共振波谱对产物结构进行了表征,测定其泡沫性能和界面性能。确定了最佳酯化条件为:以自制催化剂BN-1作催化剂,二甲苯为溶剂,n(醇)∶n(酸酐)=1∶1.6,酯化温度100℃,酯化时间5 h。随着醇碳链增加,邻苯二甲酸单醇酯钠盐泡沫能力降低,但界面活性增强。 相似文献
8.
采用羟基保护法制备月桂酸单甘酯,研究月桂酸单甘酯(简称GML)的合成与提纯,得到了含量98%的单甘酯产品.并利用正交试验对合成月桂酸单甘酯的反应条件进行了讨论,得出硼酸保护法制取月桂酸单甘酯的最佳工艺:甘油与月桂酸的摩尔比3:1,催化剂对甲苯磺酸用量为0.15%,反应温度240℃,反应时间2 h.采用分子蒸馏(Mole... 相似文献
9.
利用微生物产生的脂酶为生物催化剂,在温和条件(常压、常温)下使油脂转化为脂肪酸单甘酯、脂肪酸甲酯、烷基葡萄糖苷脂肪酸等油脂化工产品.与化学工艺相比,生物催化技术选择性好,副反应少,产物纯度高,能源消耗低,尤其是对于多不饱和脂肪酸衍生物,可以避免较高温度下氧化、聚合等副反应,不仅可以简化提纯工艺,而且有助于提高产品收率与质量.本文简要介绍近期国外化学工作者利用商品脂酶制剂为生物催化剂,通过醇解反应制备高产率、高纯度单甘酯;通过酸解反应,制取富含多不饱和脂肪酸的甘油酯;通过酯化反应,合成脂肪酸甲酯、烷基葡萄糖苷脂肪酸酯. 相似文献
10.
11.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
12.
13.
14.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
15.
16.
17.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献
18.
The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003 相似文献
19.
A refined nonlinear value of the main parameter of a material, i.e., the elongation modulus versus the instant temperature value, was suggested for introduction into the computational algorithm of tempering stresses. 相似文献
20.